Online or onsite, instructor-led live Web Application Testing training courses demonstrate through interactive discussion and hands-on practice how to carry out web application testing.
Web Application Testing training is available as "online live training" or "onsite live training". Online live training (aka "remote live training") is carried out by way of an interactive, remote desktop. Onsite live Web Application Testing training can be carried out locally on customer premises in Michigan or in NobleProg corporate training centers in Michigan.
NobleProg -- Your Local Training Provider
Detroit, MI - Renaissance Center
400 Renaissance Center, Detroit, United States, 48243
The GM Renaissance Center is conveniently located in downtown Detroit and easily accessed by car via Interstates 75 or 94, with secure underground parking available on site. Travelers flying into Detroit Metropolitan Airport (DTW) can expect a 25–30 minute trip by taxi or rideshare via I‑94. Public transit is efficient: the Detroit People Mover stops directly at the Renaissance Center station, and DDOT routes 3 and 9 serve nearby Jefferson Avenue. Pedestrian skywalks provide safe indoor access from downtown hotels, parking garages, and the riverwalk.
Ann Arbor, MI – Regus - South State Commons I
2723 S State St, Ann Arbor, United States, 48104
Regus South State Commons I is conveniently located off I‑94 via Exit 177 (State Street), with easy access to downtown Ann Arbor and surrounding suburbs. The building offers free on-site surface parking for guests. From Detroit Metropolitan Airport (DTW), the venue can be reached in approximately 20–25 minutes by taxi or rideshare via I‑94 West. Local public transit service (TheRide) operates Route 24 along South State Street, with a stop within a short 2-minute walk of the building.
Grand Rapids, MI - Regus – Calder Plaza
250 Monroe Ave NW, Grand Rapids, United States, 49503
The venue sits centrally at 250 Monroe Avenue NW in downtown Grand Rapids, easily accessed by car via US‑131 or I‑196—with connections via Monroe or Ottawa exits—and offers shared underground and surface parking. From Gerald R. Ford International Airport, take I‑96 East then I‑196 West into the city; the drive is about 20 minutes. Public transit through Rapid bus routes stops near Monroe or Ottawa Avenue, just a short walk from the Regus entrance; the downtown area is pedestrian-friendly.
Lansing, MI - Regus - One Michigan Avenue
120 North Washington Square, Lansing, United States, 48933
The venue is located in the heart of Lansing’s central business district at 120 North Washington Square, easily accessible by car via I‑496 or US‑127 with convenient street parking and a nearby parking ramp. From Capital Region International Airport (LAN), the location is approximately a 12‑minute drive west via I‑96 and US‑127, with taxis and rideshares readily available. Public transit users can take CATA bus routes that stop just a block away on Washington or Grand Avenue, offering seamless access to the venue.
This instructor-led, live training in Michigan (online or onsite) is aimed at developers and testers who wish to perform test automation using C# and Selenium.
By the end of this training, participants will be able to:
Install and configure Selenium WebDriver.
Write tests using Selenium, C#, and Nunit with Visual Studio IDE.
This course provides training for handling testing projects and provides hands on experience with web applications, functional test automation and cross browser test automation using Selenium test suite.
Intended Audience:
Software test engineers
Software developers involved in agile development
At the end of Selenium training the delegates will be able to:
Use Selenium test suite effectively in real projects
This introductory course is designed to familiarize testing professionals with the basics of testing web applications using Selenium. Testers can build, enhance, and maintain scripts using both the Selenium IDE and the Selenium 2 WebDriver.
Intended Audience
The target audience is software testers who are seeking to automate the testing of web applications using Selenium. These testers maybe new to test automation and may also include quality assurance practitioners, managers, or team leaders who are responsible for interacting with testers or who need to ensure that the tools are being implemented fully and appropriately.
At the end of the course, you will be able to:
Describe the function and purpose of Selenium
Understand the benefits and proper approach to test automation
Record automated test cases
Play back automated test cases
Apply and use different verification techniques
View and analyze results
Configure and use the Selenium RC (Remote Control)
Create and work with test suites
Schedule automatic test runs
Utilize different Selenium script formats
Modify scripts to extend the capability to test the application
Configure Selenium with Eclipse and the Selenium 2 WebDriver
Understand and use RTTS helper files
Convert selenium code to work with the Selenium 2 WebDriver
Configure Custom Log Files
Create a custom object map
Create reusable modules to reduce script maintenance
In this instructor-led, live training in Michigan, participants will learn how to enhance an automated test suite using advanced techniques to drive Selenium.
By the end of this training, participants will be able to:
Resolve complex web application test automation issues with Selenium.
Apply regular expressions and pattern-based verification techniques.
This instructor-led, live training in Michigan (online or onsite) introduces participants to automated testing with Selenium WebDriver and C# in Visual Studio. If you do not have C# programming experience or wish to brush up on C#, please check out the course: C# for Automation Test Engineers.
This course provides training for handling testing projects and provides hands on experience with web applications, functional test automation and cross browser test automation using Selenium test suite. Also, it comprehesively introduced jMeter.
In this instructor-led, live training in Michigan, participants learn first-hand how to write Protractor tests against a sample Angular web application in a live lab environment.
By the end of this course, participants will have gained proficiency in Protractor and be comfortable
creating their own automation tests for Angular applications.
integrating Protractor into their existing development workflow.
ensuring that their tests are clean and maintainable.
running Protractor with or without Selenium to drive browser behavior.
In this instructor-led, live training in Michigan participants combine the power of Python with Selenium to automate the testing of a sample web application. By combining theory with practice in a live lab environment, participants will gain the knowledge and practice needed to automate their own web testing projects using Python and Selenium.
In this instructor-led, live training in Michigan, participants will learn the theory and practice of model-based testing as they implement the indicated tools and techniques in a demo Model-Based Testing (MBT) test environment.
By the end of this training, participants will be able to:
Generate test cases by applying modeling strategies and techniques.
Assess and evaluate free and commercial tools for implementing MBT.
Manage test models for different types of software applications, systems and environments.
Evaluate, propose and implement an MBT strategy within an organization.
Understand and explain the benefits and challenges of MBT.
This instructor-led, live training in Michigan (online or onsite) is aimed at software testers who wish to use Selenium and Katalon Studio to create end-to-end automated testing solutions.
By the end of this training, participants will be able to:
Generate and execute cross-platform tests for any OS or device.
Integrate automated testing into a CI/CD pipeline.
Automate web testing, API testing, mobile testing, and desktop testing.
This course gives a comprehensive overview how to use automated functional and performance testing with Selenium and JMeter using Java/Maven environment. 3 days is spend on Selenium, 2 on JMeter.
In this instructor-led, live training, participants will learn how to write and maintain tests for Angular applications.
By the end of this training, participants will be able to
Decide the most appropriate strategy for testing an Angular application
Carry out unit testing, component testing, A/B testing and end-to-end on an Angular application
Choose the right tools for the job: Jasmine, Karma, Protractor, Mocha, etc.
Write tests in Protractor and Jasmine
Run and debug tests with Karma and Protractor
Create a maintainable test suite
Employ best practices for unit testing in Angular
Format of the course
Part lecture, part discussion, exercises and heavy hands-on practice
Note
Angular goes by different names and versions, namely: Angular.js, AngularJS, AngularJS 1, Angular 1, Angular 2, etc. To customize the version used in this training, please contact us to arrange.
This instructor-led, live training in Michigan (online or onsite) walks participants through real-life cases for Behavior Driven Development (BDD) and demonstrates hands-on how to implement Cucumber in various test scenarios.
In this instructor-led, live training in Michigan, participants learn how to use Rest Assured to test REST API services. We discuss how API testing can resolve some of the shortcomings of UI and unit based testing. The training includes practice sessions and a test development project. By the end of the training, participants will have a good understanding of when to carry out REST API testing, how to explore and access APIs, how to carry out different types of testing, and how to bring their tests together through integration and automation.
In this instructor-led, live training in Michigan participants will learn how to use Tosca to carry out end-to-end (web + backend) testing. The training combines theory with practice in a live lab environment, giving participants the chance to interact with the technology, the instructor, and their peers.
The training starts with an overview of traditional code and script-based automation testing and contrasts it with Tosca's model-based (MBT) approach. Participants learn how to create and execute test cases using Tosca's default modules as well as how to custom-build their own modules for execution.
From software modeling principles to test coverage across different browsers, this training walks participants through both theory and practice and enables them to implement their own testing solution in Tosca.
Usability testing is a technique for evaluating a software product or system by testing it on users to directly observe how they interact with it.
The workshop begins with an introduction to usability testing, what it is and how it is used by companies to promote good software design and development. The language is non-technical and the learning is practical and hands-on, with a focus on end-users, their requirements, way of thinking and way of interacting with the system.
By the end of this training, participants will know how to:
Determine the most suitable usability test approach based on a product's unique characteristics and its stage in the development cycle.
Develop a usability test plan.
Recruit, evaluate and manage testers.
Write, assign, and moderate usability test tasks that produce the biggest impact for end-users and the business.
Collect, analyze and report test results.
Communicate and collaborate effectively with business managers, developers and QA teams on the significance and actions needed for delivering an end product that not only works but works well and provides the intended user experience.
Audience
Product owners and managers
QA managers
Manual testers
Internal users of a software product or system
Format of the course
A interactive, instructor-led workshop with lots of activities and hands-on practice.
Notes
The case studies and software samples used in this workshop are pre-arranged by the instructor. To customize the materials, please contact us in advance.
Cucumber is an open-source, BDD framework for writing tests in a natural language style. BDD, or Behavior Driven Development, is an agile software development technique that encourages collaboration among developers, QA and non-technical business people in a software project.
This training begins with a discussion of BDD and how Cucumber is used to carry out BDD testing for web applications. Participants are given ample opportunity to interact with the instructor and peers while implementing the concepts and tactics learned in this hands-on, practice-based lab environment.
By the end of this training, participants will have a firm understanding of BDD and Cucumber, as well as the necessary practice and toolset to write their own test cases for real-world software test scenarios.
Format of the course
Heavy emphasis on hands-on practice.
Most of the concepts are learned through samples, exercises and hands-on development.
Note
This training uses Eclipse and Selenium. If you wish to use a different IDE or test automation framework, please contact us to arrange.
If your team is moving from manual testing to automation testing for the first time, please contact us to arrange extending the training to include additional coverage of automation testing.
In this instructor-led, live training in Michigan, participants will learn about various JavaScript testing frameworks as they step through the creation of a unit test suite for a web application.
By the end of this training, participants will be able to:
Write unit tests in JavaScript using unit test frameworks such as QUnit and Jasmine
Use frameworks such as Mocha and Chai to implement TDD and BDD
This instructor-led, live training in Michigan (online or onsite) is aimed at test engineers and developers who wish to learn how to test a complex web application using Iridium.
By the end of this training, participants will be able to:
Create end-to-end tests that simulate the actions of a user as they navigate a web application.
Automate the testing of themed applications with multiple styles.
Create test cases that are readable to non-technical people.
Execute tests in a wide variety of browsers.
Use the Iridium Snippets package for Atom to facilitate test script writing.
Reduce the costs of maintaining custom Java code and page objects.
Behat is a Behavior Driven Development (BDD) test framework written in PHP. It facilitates communication among developers, testers, business stakeholders and clients during the software development process. Behat allows non-technical people to write clear descriptions of an application's intended behavior, then runs those "scenarios" as functional tests against the application.
In this instructor-led, live training, participants will learn how to write and execute BDD style test cases using Behat and PHP.
By the end of this training, participants will be able to:
Run automated tests written in the human-readable, "Given, When, Then" Gherkin language
Use Behat based test cases to improve collaboration between technical and non-technical teams
Integrate Behat with Selenium, Mink, Goutte and other browser emulators to drive tests and generate reports
Extend Behat functionality through its extension system
Test numerous usage scenarios through terminal commands, REST APIs, and more.
Audience
Test engineers
Developers
Format of the course
Part lecture, part discussion, exercises and heavy hands-on practice
This instructor-led, live training in Michigan (onsite or remote) is aimed at engineers who wish to use Jest to test React applications and components.
By the end of this training, participants will be able to:
Install and configure a proper testing environment.
Write asynchronous tests for React apps and components.
Run Jest advanced tests that include mocking, spies and stubs.
This instructor-led, live training in (online or onsite) is aimed at DevOps engineers who wish to use Selenium to execute Selenium tests inside of Docker containers.
By the end of this training, participants will be able to:
Create test automation infrastructure for on-demand testing.
Develop a test automation framework using Java.
Build a CI/CD pipeline from scratch with Jenkins and Docker.
By the end of this training, participants will be able to:
Install and configure Maven.
Automate Testing using Selenium
Managing GIT
Integrating continous integration
Format of the Course
Interactive lecture and discussion.
Lots of exercises and practice.
Hands-on implementation in a live-lab environment.
Course Customization Options
To request a customized training for this course, please contact us to arrange.
Read more...
Last Updated:
Testimonials (14)
I enjoyed everything as it is all new for me and I can see the added value it can ring to my work.
Zareef - BMW South Africa
Course - Tosca: Model-Based Testing for Complex Systems
The Dynamics.
Cesar Ortiz Lara - Bienes Programados SA de CV
Course - Selenium WebDriver in C#
Machine Translated
Many exercises, which gave a lot of practical skills.
Rafal Borek - Bytamic Solutions sp. z o.o.
Course - Automation Testing with Cypress
Practical time was fun.
Pieter Hartzenberg - BMW
Course - Unit Testing with Javascript
Step by step analysis. Each line of code explanation. Every problem I had during the course was successfully solved and Łukasz told me the reason.
I also liked good practices that have been presented. Never have I been convinced about TDD style - I just dont find it useful and worth its time. Łukasz pointed out so many advantages of TDD, it completely changed my opinion.
Michal Uscinski - Devapo Sp. z o. o.
Course - Testing Angular Applications
Trainer is nice. His explanation is clear and interesting. He try to make the lessons interesting as possible. I enjoyed the lesson and gained a lot of knowledge. Thank you so much. The most useful technique I learned is the locating elements for different web component like textbox, radio buttons and buttons. Sometimes, the element ID is not capture correctly. We learned a different way of locating elements by using CSS selectors, XPath, Name and ID. I like the explanation. Thanks
Bee Chin Chuah - I-Access Solutions Pte Ltd
Course - Advanced Selenium with C#
As mentioned the last hour we discussed and practiced the 'Example mapping' method. Also nice that we had a pdf (from a website) that the trainer created with a lot of information.
Osman Chalaby - Vanderlande
Course - Cucumber: Implementing Behavior Driven Development (BDD) with Cucumber
Trainer subject knowledge and rapport with the audience and also his patience
Sarthak Gupta - Wolters Kluwer TAA Europe CS&O C.V.
Course - Protractor: End-to-end testing for Angular web applications
The One on One session is amazing!! And thankful that the trainer's skills are Excellent and his willingness to share them to the fullness. I am very satisfied. . with the training and I wouldn't have wish to have done it anywhere else. I would only wish that I had One day longer for the training.
Isaac Nyembo - Bechtle Clouds GmbH
Course - Advanced Selenium
Luke was very knowledgeable, patient, and very open to satisfy my curiosity, for example I asked him to generate errors to see how system will response, etc. He would go above and beyond to answer questions or demonstrate the functionalities, even some of my questions were out of the class scope. He gave me a real experience with the system. I definitely will take another class with him and recommend him as a teacher for others. Thank you Luke!.
Tina Henderson
Course - Test Automation with Selenium and Jenkins
I thought the pacing was perfect. Good amount of interaction considering it was done over the computer. Lots of interaction available by connecting to a virtual machine and following along. Thought the project we completed had very clean code and gave me a good idea of how something like this should be compiled. Will be able to apply what I learned to the workplace.
Chris Dingwell - STI Technologies
Course - Introduction to Selenium
Kristin was a very good trainer. He adjusted his training to our levels and explained very clearly and structured. The training was very interesting and well organized. I liked the teaching style.
Annett Edom
Course - Selenium for Victims of Manual Testing
I generally was benefit from the detail and examples shown.
Timothy Walton
Course - Selenium WebDriver Overview
I liked the small group, 1 on 1 attention. Felt comfortable asking questions.
Online Web Application Testing training in Michigan, Web Application Testing training courses in Michigan, Weekend Web Application Testing courses in Michigan, Evening Web Application Testing training in Michigan, Web Application Testing instructor-led in Michigan, Evening Web Application Testing courses in Michigan, Web Application Testing one on one training in Michigan, Web Application Testing on-site in Michigan, Web Application Testing instructor in Michigan, Web Application Testing trainer in Michigan, Web Application Testing private courses in Michigan, Online Web Application Testing training in Michigan, Web Application Testing classes in Michigan, Web Application Testing coaching in Michigan, Web Application Testing boot camp in Michigan, Weekend Web Application Testing training in Michigan, Web Application Testing instructor-led in Michigan
