NobleProg Training Place, City Wichita, KS - Regus - Grand Hotel at Union Station

Wichita, KS - Regus - Grand Hotel at Union Station

801 E Douglas Ave, 2nd Floor, Wichita, United States, 67202

The venue is located in the heart of downtown Wichita at Union Station, accessible by car via I‑135 with exits to Douglas Avenue, and includes secure on-site parking. From Wichita Dwight D. Eisenhower National Airport (ICT), take I‑235 East to I‑135 South, exit at Douglas Avenue; taxi or rideshare typically takes about 15 minutes. Public transit users can take Wichita Transit bus routes that stop near Broadway and Douglas, followed by a short walk to the station in a pedestrian-friendly area.

Overland Park, KS - Commerce Plaza

7300 West 110th St, Overland Park, United States, 66210

Commerce Plaza is easily accessible by car via Interstate 435 and local roads such as Metcalf and College Boulevards, with complimentary open parking and nearby garages. Travelers arriving from Kansas City International Airport (MCI) will find the venue approximately 38 miles northeast—a 35 to 45‑minute drive via I‑435. Public transit riders can use Johnson County Transit services, with bus stops located just steps away from the building. Numerous hotels, restaurants, and shopping destinations are all within walking distance, ensuring convenience for attendees
NobleProg Training Place, City Kansas City, KS - The Stables KCK / CABA

Kansas City, KS - The Stables KCK / CABA

1303 Central Ave, Kansas City, United States, 66102

The venue is centrally located in the heart of Kansas City, Kansas, at 1303 Central Avenue, easily accessible by car via I‑70 or I‑35 with exits to Central Avenue; ample free street parking is available along Central Avenue and 13th Street. From Kansas City International Airport (MCI), take I‑70 East to the Central Avenue exit—taxi or rideshare takes about 20 minutes. Public transit users benefit from local bus routes along Central Avenue, with stops just steps away from the entrance in this pedestrian-friendly corridor.
NobleProg Training Place, City Topeka, KS - Omni Circle

Topeka, KS - Omni Circle

1301 SW Topeka Blvd, Topeka, United States, 66612

Omni Circle is centrally located on SW Topeka Boulevard, easily accessible by car with ample public parking nearby in surface lots. Visitors from Forbes Field (Topeka Regional Airport, FOE) can reach the venue in about 10 minutes via SW McAlister Road. Public transport users can take Topeka Metro’s Route 17, which has stops near SW Topeka Boulevard, offering straightforward access for local attendees.

Explore Our Courses

CATIA V5 Fundamentals - 3 Days

 21 Hours

This instructor-led, live training in Kansas (online or onsite) is aimed at beginner-level to intermediate-level web designers who wish to learn how to use CATIA V5 for collaborative product creation and product data management.

By the end of this training, participants will be able to:

  • Understand the CATIA V5 interface and navigation.
  • Create 2D sketches and transform them into 3D models.
  • Develop assemblies to combine multiple components.
Read more...

CATIA V5 Fundamentals

 14 Hours

This instructor-led, live training in Kansas (online or onsite) is aimed at beginner-level to intermediate-level web designers who wish to learn how to use CATIA V5 for collaborative product creation and product data management.

By the end of this training, participants will be able to:

  • Understand the CATIA V5 interface and navigation.
  • Create 2D sketches and transform them into 3D models.
  • Develop assemblies to combine multiple components.
Read more...

Applying SysML with Magic Draw

 24 Hours

The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the Magicdraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE.

Read more...

Learning CATIA

 14 Hours

This instructor-led, live training in Kansas (online or onsite) is aimed at web designers who wish to use CATIA to develop and design 2D and 3D models.

By the end of this training, participants will be able to:

  • Support multiple stages of product development including design, manufacturing, and engineering.
  • Facilitate the design of various systems, such as fluid systems.
  • Apply CATIA to a wide variety of industries and industrial equipment.
Read more...

MBSE with Automation

 40 Hours

The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training covers the fundamentals of creating templates and generating reports within the MagicDraw/Cameo tool suite, and teaches how macros and scripts work inside MagicDraw and what they can be applied to. 

Read more...

MBSE with Model Analysis

 40 Hours

The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training teaches the core concepts and features of validation rules, validation suites, and model metrics and is designed to introduce the core concepts and features of developing and utilizing model queries in MagicDraw/Cameo.​

Read more...

Last Updated:

Testimonials (1)

Anil was very understanding and explained the course content in detail. With more time the outcome of the course would be better instead of rushing the content, but over all Anil is very familiar with the software CATIA and is a great trainer,

Jaydon - GRI Towers South Africa

Course - Learning CATIA

Upcoming Courses

Learning CATIA

2025-09-25 9:30 am
14 hours
Overland Park, KS - Commerce Plaza
$ 2703 (Online)
$ 2703 (Classroom)

Learning CATIA

2025-10-09 9:30 am
14 hours
Wichita, KS - Regus - Grand Hotel at Union Station
$ 2703 (Online)
$ 2703 (Classroom)

Learning CATIA

2025-10-23 9:30 am
14 hours
Overland Park, KS - Commerce Plaza
$ 2703 (Online)
$ 2703 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

CATIA Consulting
Online CATIA training in Kansas, CATIA training courses in Kansas, Weekend CATIA courses in Kansas, Evening CATIA training in Kansas, CATIA instructor-led in Kansas, CATIA coaching in Kansas, CATIA trainer in Kansas, Weekend CATIA training in Kansas, CATIA boot camp in Kansas, CATIA instructor in Kansas, Evening CATIA courses in Kansas, Online CATIA training in Kansas, CATIA instructor-led in Kansas, CATIA private courses in Kansas, CATIA classes in Kansas, CATIA one on one training in Kansas, CATIA on-site in Kansas