Baltimore, MD – Regus at Legg Mason Tower

100 International Drive, 23rd Floor, Baltimore, United States, 21202

The venue is located on the 23rd floor of the Class‑A Legg Mason Tower in Harbor East, adjacent to Baltimore’s Inner Harbor and easily reached by car via I‑95 or I‑395, with multiple nearby parking garages and some on-site parking available. From Baltimore/Washington International Thurgood Marshall Airport (BWI), about 10 miles south, taxis or rideshares usually take 15–20 minutes via I‑95 North. Public transit is convenient with Baltimore Light Rail access at Harbor East station just a 2‑minute walk away, along with MTA buses running along Pratt Street, making the venue readily accessible without a vehicle.

Annapolis, MD – Regus at Annapolis Center

1997 Annapolis Exchange, Ste 300, Annapolis, United States, 21401

The venue is situated in the Annapolis Center on Exchange Parkway, just off Route 50 and close to US 301, with on-site and nearby garage parking available. From Baltimore/Washington International Thurgood Marshall Airport (BWI), approximately 25 miles north, taxi or rideshare typically takes 30–35 minutes heading south via MD‑70 and Route 50. Public transit users can take the B30 or Route 40 CAT shuttle to Westfield Annapolis, then transfer to local buses that stop near Annapolis Center—requiring a convenient short walk to the entrance.

Baltimore, MD – Regus at Inner Harbor Center

400 East Pratt Street Downtown, 8th Floor, Baltimore, United States, 21202

The venue is situated in the prominent Inner Harbor Center, easily reached by car via I‑95 or I‑395 with several nearby public parking garages and on-site parking available. From Baltimore/Washington International Thurgood Marshall Airport (BWI), about 10 miles south, a taxi or rideshare typically takes 15–20 minutes via I‑95 North. Public transit options include Baltimore Light Rail at Harbor East station (a two-minute walk) and multiple MTA bus routes along Pratt Street, making the venue conveniently accessible without a vehicle.

Explore Our Courses

WAAM with FANUC Robots and HAAS CNC Integration

 21 Hours

WAAM (Wire Arc Additive Manufacturing) is an advanced 3D metal printing method that combines arc welding and motion control technologies.

This instructor-led, live training (online or onsite) is aimed at beginner-level to intermediate-level automation professionals who wish to program a FANUC welding robot and integrate it with HAAS CNC equipment for a hybrid WAAM-based metal printing process.

By the end of this training, participants will be able to:

  • Understand the fundamentals of the WAAM process and its applications.
  • Program and simulate a FANUC robot for arc welding-based deposition.
  • Align and coordinate HAAS CNC worktables with robotic paths.
  • Develop integrated WAAM workflows combining robotic and CNC motion.

Format of the Course

  • Interactive lecture and discussion.
  • Hands-on programming using simulation tools.
  • Live-lab environment or equipment demonstration (where available).

Course Customization Options

  • To request a customized training for this course based on your specific machine setup or process goals, please contact us to arrange.
Read more...

Mastering the QIDI TECH X-CF Pro 3D Printer

 14 Hours

This instructor-led, live training in Maryland (online or onsite) is aimed at intermediate-level 3D printing professionals who wish to optimize the QIDI TECH X-CF Pro for advanced material printing.

By the end of this training, participants will be able to:

  • Set up and calibrate the QIDI TECH X-CF Pro 3D Printer for optimal performance.
  • Understand the properties and applications of carbon fiber and nylon filaments.
  • Optimize slicing settings for complex 3D prints.
  • Identify and troubleshoot common print issues.
Read more...

Error Prevention and Basic Maintenance for 3D Printing

 7 Hours

This instructor-led, live training in Maryland (online or onsite) is aimed at beginner-level 3D printer technicians who wish to prevent common errors in 3D printing and perform basic maintenance on 3D printers.

By the end of this training, participants will be able to:

  • Understand the components and technologies behind 3D printing.
  • Identify and prevent common 3D printing errors.
  • Perform basic maintenance tasks on 3D printers.
  • Apply troubleshooting techniques to resolve printing issues.
Read more...

Autodesk Fusion 360

 21 Hours

This instructor-led, live training in Maryland (online or onsite) is aimed at beginner-level to advanced-level 3D design and 3D printing enthusiasts who wish to use Fusion 360 to design, simulate, and prepare models for 3D printing.

By the end of this training, participants will be able to:

  • Install and configure Fusion 360 for optimal performance.
  • Design, model, and simulate 3D objects in a unified environment.
  • Optimize and prepare designs for the 3D printing process.
  • Collaborate and share their designs using Fusion 360's cloud capabilities.
Read more...

Getting Started with 3D Printing

 7 Hours

In this instructor-led, live training in Maryland, participants will learn how to design their own 3D models and how to use a 3D printer.

By the end of this training, participants will be able to:

  • Understand the basic concepts behind 3D printing
  • Learn how to use 3D modelling tools like Google SketchUp
  • Design their own 3D model
  • Learn how to use and calibrate a 3D printer
  • Print their 3D model using a 3D printer
Read more...

Last Updated:

Upcoming Courses

Autodesk Fusion 360

2025-09-15 9:30 am
21 hours
Baltimore, MD – Regus at Legg Mason Tower
$ 4054 (Online)
$ 4054 (Classroom)

WAAM with FANUC Robots and HAAS CNC Integration

2025-09-29 9:30 am
21 hours
Baltimore, MD – Regus at Legg Mason Tower
$ 4054 (Online)
$ 4054 (Classroom)

Error Prevention and Basic Maintenance for 3D Printing

2025-10-10 9:30 am
7 hours
Baltimore, MD – Regus at Legg Mason Tower
$ 1630 (Online)
$ 1630 (Classroom)

Autodesk Fusion 360

2025-10-27 9:30 am
21 hours
Baltimore, MD – Regus at Legg Mason Tower
$ 4054 (Online)
$ 4054 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries
Online 3D Printing training in Maryland, 3D Printing training courses in Maryland, Weekend 3D Printing courses in Maryland, Evening 3D Printing training in Maryland, 3D Printing instructor-led in Maryland, Evening 3D Printing courses in Maryland, 3D Printing private courses in Maryland, 3D Printing on-site in Maryland, 3D Printing one on one training in Maryland, 3D Printing instructor-led in Maryland, 3D Printing classes in Maryland, 3D Printing trainer in Maryland, 3D Printing coaching in Maryland, Online 3D Printing training in Maryland, 3D Printing boot camp in Maryland, 3D Printing instructor in Maryland, Weekend 3D Printing training in Maryland