Kansas City, MO - Regus – Two Pershing Square (Crown Center)

2300 Main St, Kansas City, United States, 64108

Regus in Two Pershing Square is located just steps from Union Station and is easily accessible by car using Interstate 70, with secure underground parking and skywalk access direct to the building. Travelers from Kansas City International Airport (MCI) can reach the venue in approximately 20 to 25 minutes by taxi or rideshare via I‑70. Public transit users can take the KCATA bus or the free downtown streetcar to Union Station, then walk through the skywalk before taking the elevator to the 9th floor.
NobleProg Training Place, City Jefferson City, MO - Jefferson and High

Jefferson City, MO - Jefferson and High

227 Jefferson Street, Jefferson City, United States,  65101

Jefferson and High is centrally located on Jefferson Street, within easy reach by car, with public parking garages and metered street parking nearby. Guests arriving via Jefferson City Memorial Airport (BCY) can reach the venue in approximately 10 minutes by taxi or rideshare via Highway 54/63 into downtown. Public transit users will find JeffTran bus routes stopping a short walk away on Capitol Avenue, offering seamless access for attendees throughout the city
NobleProg Training Place, City Louis, MO - Regus – Central West End

Louis, MO - Regus – Central West End

4625 Lindell Blvd, St. Louis, United States, 63108

Located on Lindell Boulevard in the Central West End, this Regus center is easily accessible by car using Interstates 64 or 44, with secure underground and surface parking available nearby. Visitors arriving via St. Louis Lambert International Airport (STL) typically reach the venue in 15–20 minutes by taxi or rideshare via I‑70 and Forest Park Expressway. Public transit users can take MetroLink to the Central West End station, followed by a short walk on Lindell to reach the facility.

Kansas City, MO - Plexpod Crossroads

1712 Main Street, Kansas City, United States, 64108

Plexpod Crossroads is situated in downtown Kansas City's Crossroads Arts District and is easily reached by car, with free three-hour street parking and paid daily lots nearby. Visitors arriving from Kansas City International Airport (MCI) can expect a 20–25 minute taxi or rideshare trip via I‑70 into downtown. Public transit and streetcar access are seamless, with lines stopping just one block away—then it’s a short walk into the building.

Explore Our Courses

WAAM with FANUC Robots and HAAS CNC Integration

 21 Hours

WAAM (Wire Arc Additive Manufacturing) is an advanced 3D metal printing method that combines arc welding and motion control technologies.

This instructor-led, live training (online or onsite) is aimed at beginner-level to intermediate-level automation professionals who wish to program a FANUC welding robot and integrate it with HAAS CNC equipment for a hybrid WAAM-based metal printing process.

By the end of this training, participants will be able to:

  • Understand the fundamentals of the WAAM process and its applications.
  • Program and simulate a FANUC robot for arc welding-based deposition.
  • Align and coordinate HAAS CNC worktables with robotic paths.
  • Develop integrated WAAM workflows combining robotic and CNC motion.

Format of the Course

  • Interactive lecture and discussion.
  • Hands-on programming using simulation tools.
  • Live-lab environment or equipment demonstration (where available).

Course Customization Options

  • To request a customized training for this course based on your specific machine setup or process goals, please contact us to arrange.
Read more...

Mastering the QIDI TECH X-CF Pro 3D Printer

 14 Hours

This instructor-led, live training in Missouri (online or onsite) is aimed at intermediate-level 3D printing professionals who wish to optimize the QIDI TECH X-CF Pro for advanced material printing.

By the end of this training, participants will be able to:

  • Set up and calibrate the QIDI TECH X-CF Pro 3D Printer for optimal performance.
  • Understand the properties and applications of carbon fiber and nylon filaments.
  • Optimize slicing settings for complex 3D prints.
  • Identify and troubleshoot common print issues.
Read more...

Error Prevention and Basic Maintenance for 3D Printing

 7 Hours

This instructor-led, live training in Missouri (online or onsite) is aimed at beginner-level 3D printer technicians who wish to prevent common errors in 3D printing and perform basic maintenance on 3D printers.

By the end of this training, participants will be able to:

  • Understand the components and technologies behind 3D printing.
  • Identify and prevent common 3D printing errors.
  • Perform basic maintenance tasks on 3D printers.
  • Apply troubleshooting techniques to resolve printing issues.
Read more...

Autodesk Fusion 360

 21 Hours

This instructor-led, live training in Missouri (online or onsite) is aimed at beginner-level to advanced-level 3D design and 3D printing enthusiasts who wish to use Fusion 360 to design, simulate, and prepare models for 3D printing.

By the end of this training, participants will be able to:

  • Install and configure Fusion 360 for optimal performance.
  • Design, model, and simulate 3D objects in a unified environment.
  • Optimize and prepare designs for the 3D printing process.
  • Collaborate and share their designs using Fusion 360's cloud capabilities.
Read more...

Getting Started with 3D Printing

 7 Hours

In this instructor-led, live training in Missouri, participants will learn how to design their own 3D models and how to use a 3D printer.

By the end of this training, participants will be able to:

  • Understand the basic concepts behind 3D printing
  • Learn how to use 3D modelling tools like Google SketchUp
  • Design their own 3D model
  • Learn how to use and calibrate a 3D printer
  • Print their 3D model using a 3D printer
Read more...

Last Updated:

Upcoming Courses

Autodesk Fusion 360

2025-07-14 9:30 am
21 hours
Kansas City, MO - Regus – Two Pershing Square (Crown Center)
$ 4054 (Online)
$ 4054 (Classroom)

WAAM with FANUC Robots and HAAS CNC Integration

2025-07-28 9:30 am
21 hours
Kansas City, MO - Plexpod Crossroads
$ 4054 (Online)
$ 5254 (Classroom)

Error Prevention and Basic Maintenance for 3D Printing

2025-08-11 9:30 am
7 hours
Kansas City, MO - Regus – Two Pershing Square (Crown Center)
$ 1630 (Online)
$ 1630 (Classroom)

Autodesk Fusion 360

2025-08-25 9:30 am
21 hours
Kansas City, MO - Plexpod Crossroads
$ 4054 (Online)
$ 5254 (Classroom)

Autodesk Fusion 360

2025-09-08 9:30 am
21 hours
Kansas City, MO - Regus – Two Pershing Square (Crown Center)
$ 4054 (Online)
$ 4054 (Classroom)

Error Prevention and Basic Maintenance for 3D Printing

2025-09-22 9:30 am
7 hours
Kansas City, MO - Plexpod Crossroads
$ 1630 (Online)
$ 2030 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries
Online 3D Printing training in Missouri, 3D Printing training courses in Missouri, Weekend 3D Printing courses in Missouri, Evening 3D Printing training in Missouri, 3D Printing instructor-led in Missouri, 3D Printing instructor in Missouri, 3D Printing trainer in Missouri, 3D Printing on-site in Missouri, Weekend 3D Printing training in Missouri, 3D Printing boot camp in Missouri, 3D Printing coaching in Missouri, Evening 3D Printing courses in Missouri, 3D Printing classes in Missouri, 3D Printing one on one training in Missouri, 3D Printing instructor-led in Missouri, Online 3D Printing training in Missouri, 3D Printing private courses in Missouri