Atlanta, GA – Regus at Colony Squar

1201 Peachtree Street NE, Suite 200, Atlanta, United States, 30361

The venue is centrally located in Midtown Atlanta within the prominent Colony Square complex at 1201 Peachtree Street NE, easily accessed by car via I‑75/85 or GA‑400, with several parking garages nearby. From Hartsfield–Jackson Atlanta International Airport (ATL), around 15 miles south, a taxi or rideshare typically takes 20–30 minutes north along I‑75/85 N. Public transit users can take MARTA Rail to the Arts Center or Midtown stations (0.3–0.5 miles away) and walk easily, and numerous MARTA bus routes along Peachtree Street stop directly outside the entrance.

Atlanta, GA – The Proscenium

1170 Peachtree Street NE, Atlanta, United States, 30309

The venue is located in the heart of Midtown Atlanta in the Proscenium high–rise at 1170 Peachtree Street NE, easily accessible by car via I‑75/85 and GA‑400 with several parking garages nearby. Visitors arriving from Hartsfield–Jackson Atlanta International Airport (ATL), about 15 miles south, can expect a taxi or rideshare ride taking 20–30 minutes via I‑75/85 North. Public transit is seamless with MARTA Rail service; the Arts Center and Midtown stations are within walking distance (approximately 0.3–0.4 miles), and multiple MARTA bus routes also serve Peachtree Street.

Decatur, GA – Regus at One West Court Square

One West Court Square, Suite 750, Decatur, United States, 30030

The venue is located in the heart of downtown Decatur within One West Court Square, easily reached by car via I‑20 and I‑285, with several public parking decks directly adjacent. Travelers from Hartsfield–Jackson Atlanta International Airport (ATL), approximately 17 miles southwest, can expect a taxi or rideshare ride of around 25–30 minutes via I‑20 East. Public transit is particularly convenient: MARTA rail users can disembark at Decatur Station (about 0.15 miles away) and walk a few minutes to the building entrance. Local bus routes also serve Trinity Place and Swanton Way, putting the center within easy reach.

Atlanta, GA – Regus at One Hartsfield

100 Hartsfield Centre Parkway, Suite 500, Atlanta, United States, 30354

The venue is located in the One Hartsfield Center office building, adjacent to Hartsfield–Jackson Atlanta International Airport, easily reached by car via I‑75/I‑85 or GA‑138, with abundant on-site parking. Visitors arriving from ATL airport can walk or take a shuttle to the building, or opt for a quick 2–3‑minute taxi or rideshare ride. Public transit users can board MARTA from the Airport Station and ride one stop to College Park Station, then catch a connecting shuttle or enjoy a brief walk of about half a mile.

Atlanta, GA – Regus at Peachtree

260 Peachtree Street NW, Suite 2200, Atlanta, United States, 30303

The venue is situated in the iconic Coastal States Building at 260 Peachtree Street in downtown Atlanta, accessible by car via I‑75/85 or I‑20 with convenient parking garages nearby. From Hartsfield–Jackson Atlanta International Airport (ATL), about 12 miles south, a taxi or rideshare along I‑75/85 North takes approximately 15–20 minutes. For public transit, MARTA rail users can disembark at Five Points Station and walk 0.5 miles northeast, or exit at Peachtree Center Station and walk two blocks north—both routes offering easy access.

Augusta, GA – At Broad Street

823 Broad Street, Augusta, United States, 3090

The venue is located in the heart of downtown Augusta on Broad Street, easily accessible by car via I‑20 with several public parking garages nearby. From Augusta Regional Airport (AGS), about 9 miles west, taxis or rideshares typically take 15–20 minutes via I‑20. Public transit is available through Augusta Public Transit buses with routes along Broad Street, stopping within a few blocks of the venue, offering a convenient option for attendees without a car.

Savannah, GA – Regus at Bull Street

100 Bull St Downtown, Suite 200, Savannah, United States, 31401

The venue is located in the historic downtown area on Bull Street in the Altmayer Building, easily accessible by car via I‑16 and U.S. 17, with several public garages nearby. From Savannah/Hilton Head International Airport (SAV), about 12 miles west, taxis or rideshares typically take 15–20 minutes via U.S. 17 South. Public transit is available via Chatham Area Transit (CAT) buses, with frequent service along Bull and Broughton Streets; Johnson Square Station is just a couple minutes’ walk from the venue.

Explore Our Courses

Advanced Arduino Programming

 14 Hours

In this instructor-led, live training in Georgia, participants will learn how to program the Arduino using advanced techniques as they step through the creation of a simple sensor alert system.

By the end of this training, participants will be able to:

  • Understand how Arduino works.
  • Dig deep into the main components and functionalities of Arduino.
  • Program the Arduino without using the Arduino IDE.
Read more...

Arduino Programming for Beginners

 21 Hours

In this instructor-led, live training in Georgia, participants will learn how to program the Arduino for real-world usage, such as to control lights, motors and motion detection sensors. This course assumes the use of real hardware components in a live lab environment (not software-simulated hardware). 

By the end of this training, participants will be able to:

  • Program Arduino to control lights, motors, and other devices.
  • Understand Arduino's architecture, including inputs and connectors for add-on devices.
  • Add third-party components such as LCDs, accelerometers, gyroscopes, and GPS trackers to extend Arduino's functionality.
  • Understand the various options in programming languages, from C to drag-and-drop languages.
  • Test, debug, and deploy the Arduino to solve real world problems.
Read more...

Building A Robot from the Ground Up

 28 Hours

In this instructor-led, live training, participants will learn how to build a robot using Arduino hardware and the Arduino (C/C++) language.

By the end of this training, participants will be able to:

  • Build and operate a robotic system that includes both software and hardware components
  • Understand the key concepts used in robotic technologies
  • Assemble motors, sensors and microcontrollers into a working robot
  • Design the mechanical structure of a robot

Audience

  • Developers
  • Engineers
  • Hobbyists

Format of the course

  • Part lecture, part discussion, exercises and heavy hands-on practice

Note

  • Hardware kits will be specified by the instructor before the training, but will roughly contain the following components:
  • Arduino board
  • Motor controller
  • Distance sensor
  • Bluetooth slave
  • Prototyping board and cables
  • USB cable
  • Vehicle kit
  • Participants will need to purchase their own hardware.
  • If you wish to customize this training, please contact us to arrange.
Read more...

Introduction to IoT Using Arduino

 14 Hours

In this instructor-led, live training in Georgia, participants will learn the fundamentals of IoT as they step through the creation of an Arduino-based IoT sensor system.

By the end of this training, participants will be able to:

  • Understand the principles of IoT, including IoT components and communication techniques.
  • Learn how to use Arduino communication modules that can be used for different IoT systems.
  • Learn how to use and program a mobile app to control Arduino.
  • Use a Wi-Fi module to connect the Arduino to another device.
  • Build and deploy their own IoT Sensor System.
Read more...

Last Updated:

Testimonials (2)

Practical work

James - Argent Energy

Course - Introduction to IoT Using Arduino

The aquisition of useful knowlwdge and clarification of some things I was not sure of peviously.

Kenneth Mahoney - University of Glasgow

Course - Arduino: Programming a Microcontroller for Beginners

Upcoming Courses

Advanced Arduino Programming

2025-10-01 9:30 am
14 hours
Decatur, GA – Regus at One West Court Square
$ 1737 (Online)
$ 2337 (Classroom)

Building A Robot from the Ground Up

2025-10-20 9:30 am
28 hours
Decatur, GA – Regus at One West Court Square
$ 4440 (Online)
$ 5640 (Classroom)

Building A Robot from the Ground Up

2025-11-03 9:30 am
28 hours
Decatur, GA – Regus at One West Court Square
$ 4440 (Online)
$ 5640 (Classroom)

Building A Robot from the Ground Up

2025-11-17 9:30 am
28 hours
Decatur, GA – Regus at One West Court Square
$ 4440 (Online)
$ 5640 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

Arduino Consulting
Online Arduino training in Georgia, Arduino training courses in Georgia, Weekend Arduino courses in Georgia, Evening Arduino training in Georgia, Arduino instructor-led in Georgia, Weekend Arduino training in Georgia, Arduino instructor in Georgia, Arduino instructor-led in Georgia, Arduino coaching in Georgia, Arduino on-site in Georgia, Arduino one on one training in Georgia, Arduino trainer in Georgia, Evening Arduino courses in Georgia, Online Arduino training in Georgia, Arduino private courses in Georgia, Arduino boot camp in Georgia, Arduino classes in Georgia