VA, Stafford - Quantico Corporate

800 Corporate Drive, Suite 301, Stafford, united states, 22554

The venue is located between interstate 95 and the Jefferson Davis Highway, in the vicinity of the Courtyard by Mario...

VA, Fredericksburg - Central Park Corporate Center

1320 Central Park Blvd., Suite 200, Fredericksburg, united states, 22401

The venue is located behind a complex of commercial buildings with the Bank of America just on the corner before the turn ...

VA, Richmond - Two Paragon Place

6802 Paragon Place Suite 410, Richmond, united states, 23230

The venue is located in bustling Richmond with Hampton Inn, Embassy Suites and Westin Hotel less than a mile away.

VA, Reston - Sunrise Valley

12020 Sunrise Valley Dr #100, Reston, united states, 20191
The venue is located just behind the NCRA and Reston Plaza Cafe building and just next door to the United Healthcare building...

VA, Reston - Reston Town Center I

11921 Freedom Dr #550, Reston, united states, 20190
The venue is located in the Reston Town Center, near Chico's and the Artinsights Gallery of Film and Contemporary Art.

VA, Richmond - Sun Trust Center Downtown

919 E Main St, Richmond , united states, 23219
The venue is located in the Sun Trust Center on the crossing of E Main Street and S to N 10th Street just opposite of 7 Eleve...

Explore Our Courses

Advanced Arduino Programming

14 Hours
In this instructor-led, live training in Virginia, participants will learn how to program the Arduino using advanced techniques as they step through the creation of a simple sensor alert system. By the end of this training, participants will be able to:
  • Understand how Arduino works.
  • Dig deep into the main components and functionalities of Arduino.
  • Program the Arduino without using the Arduino IDE.
Read more...

Arduino Programming for Beginners

21 Hours
In this instructor-led, live training in Virginia, participants will learn how to program the Arduino for real-world usage, such as to control lights, motors and motion detection sensors. This course assumes the use of real hardware components in a live lab environment (not software-simulated hardware).  By the end of this training, participants will be able to:
  • Program Arduino to control lights, motors, and other devices.
  • Understand Arduino's architecture, including inputs and connectors for add-on devices.
  • Add third-party components such as LCDs, accelerometers, gyroscopes, and GPS trackers to extend Arduino's functionality.
  • Understand the various options in programming languages, from C to drag-and-drop languages.
  • Test, debug, and deploy the Arduino to solve real world problems.
Read more...

Building A Robot from the Ground Up

28 Hours
In this instructor-led, live training, participants will learn how to build a robot using Arduino hardware and the Arduino (C/C++) language. By the end of this training, participants will be able to:
  • Build and operate a robotic system that includes both software and hardware components
  • Understand the key concepts used in robotic technologies
  • Assemble motors, sensors and microcontrollers into a working robot
  • Design the mechanical structure of a robot
Audience
  • Developers
  • Engineers
  • Hobbyists
Format of the course
  • Part lecture, part discussion, exercises and heavy hands-on practice
Note
  • Hardware kits will be specified by the instructor before the training, but will roughly contain the following components:
  • Arduino board
  • Motor controller
  • Distance sensor
  • Bluetooth slave
  • Prototyping board and cables
  • USB cable
  • Vehicle kit
  • Participants will need to purchase their own hardware.
  • If you wish to customize this training, please contact us to arrange.
Read more...

Introduction to IoT Using Arduino

14 Hours
In this instructor-led, live training in Virginia, participants will learn the fundamentals of IoT as they step through the creation of an Arduino-based IoT sensor system. By the end of this training, participants will be able to:
  • Understand the principles of IoT, including IoT components and communication techniques.
  • Learn how to use Arduino communication modules that can be used for different IoT systems.
  • Learn how to use and program a mobile app to control Arduino.
  • Use a Wi-Fi module to connect the Arduino to another device.
  • Build and deploy their own IoT Sensor System.
Read more...

Last Updated:

Testimonials (6)

Just getting off the ground and doing some basic things was super useful

Remy Pieron - Facebook
Course - Arduino Programming for Beginners

relaxed and informal environment plenty of help during worked examples

bernard hoey - University of Glasgow
Course - Arduino: Programming a Microcontroller for Beginners

I enjoyed the training was delivered by someone with experience in the field.

Nicholas Scott - University of Glasgow
Course - Arduino: Programming a Microcontroller for Beginners

I found the balance of "white board" teaching versus practical "hands-on" learning was just right for an Arduino introductory course, and the pace was also appropriate.

Neil Owen - University of Glasgow
Course - Arduino: Programming a Microcontroller for Beginners

Rod's style was entertaining.

Tom O'Hara - University of Glasgow
Course - Arduino: Programming a Microcontroller for Beginners

Practical work

James - Argent Energy
Course - Introduction to IoT Using Arduino
Online Arduino training in Virginia, Arduino training courses in Virginia, Weekend Arduino courses in Virginia, Evening Arduino training in Virginia, Arduino instructor-led in Virginia, Arduino one on one training in Virginia, Arduino instructor in Virginia, Arduino coaching in Virginia, Weekend Arduino training in Virginia, Online Arduino training in Virginia, Arduino trainer in Virginia, Arduino classes in Virginia, Arduino boot camp in Virginia, Arduino on-site in Virginia, Arduino instructor-led in Virginia, Evening Arduino courses in Virginia, Arduino private courses in Virginia
1