Get in Touch

Totowa, NJ – Regus at Riverview Drive

999 Riverview Dr 2nd Floor, Totowa, United States, 07512

The venue is located in a landscaped corporate park off Route 46 and I‑80, offering easy access by car and free on-site parking. From Newark Liberty International Airport (EWR), about 15 miles away, a taxi or rideshare ride via I‑78 West typically takes 20–25 minutes. Visitors arriving by car from New York City or northern NJ can use I‑80, I‑287, or the Garden State Parkway. Public transit is also convenient: NJ Transit and local bus routes stop near the Riverview campus, and the Little Falls train station is just a short rideshare or walk away.

Princeton, NJ – Regus at Overlook Business Center

100 Overlook Center, 2nd Floor, Princeton, United States, 08540

The venue is located just off Route 1 within a landscaped office park at Overlook Center, easily reached by car via I‑95 or US‑1, with complimentary on-site parking. From Newark Liberty or Philadelphia International Airports, travel takes approximately 1–1.5 hours via I‑95 and US‑1. Attendees can also arrive by train: New Jersey Transit and Amtrak serve Princeton Junction Station (about 3 miles away), with local shuttle or taxi options for the final leg. Public transit users can take local DART or Coach USA buses that stop at Route 1 and University Drive, followed by a brief walk to building entrance.

Newark, NJ – At One Gateway Center

One Gateway Center, Suite 2600, Newark, United States, 07102

The venue is situated within the iconic One Gateway Center, directly connected to Newark Penn Station via covered walkway, and is conveniently accessible by car via I‑95, I‑78, I‑280, and the New Jersey Turnpike, with public garages nearby. Visitors arriving from Newark Liberty International Airport (EWR), roughly 3 miles away, can expect a 10-minute taxi or rideshare ride via I‑78 West. Those coming by train benefit from Penn Station, which also connects by PATH service to Manhattan in under 20 minutes. Local NJ Transit and Newark Light Rail bus routes also serve the Gateway complex, offering seamless public transit access.

Jersey City, NJ – Regus at Hudson Street

101 Hudson Street, 21st Floor, Jersey City, united states, 07302

The venue is located on the 21st floor of the 42‑story Merrill Lynch Building at 101 Hudson Street in Paulus Hook, reachable by car via I‑78, I‑95, or the New Jersey Turnpike, with public and building parking available. From Newark Liberty Airport (EWR), about 8 miles away, taxis or rideshares take 15–20 minutes via I‑78 East. Attendees arriving by train can use Newark Penn or PATH to Exchange Place or Newport stations, then walk 5–7 minutes to the building. Multiple NJ Transit and local bus routes also serve the area.

Trenton, NJ – Base Camp Trenton

247 E Front St, Trenton, United States, 08611

The venue is located in downtown Trenton on Front Street, just off Route 29 and a short drive from I‑295, offering easy car access with street and municipal lot parking nearby. Visitors coming from Newark Liberty International Airport (EWR), about 45 miles northeast, can expect a taxi or rideshare ride of roughly 50–60 minutes via I‑95 South. Those arriving from Philadelphia International Airport (PHL), approximately 25 miles southwest, typically take about 35–45 minutes via I‑95 North. Public transit is also convenient—NJ Transit trains arrive at Trenton Transit Center just a few blocks away and local DART First State buses stop near Front Street, placing the venue within short walking distance for attendees without a car.

Explore Our Courses

Design Patterns (GoF) for Java

 21 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at intermediate-level Java developers who wish to apply design patterns to improve software structure, maintainability, and scalability.

By the end of this training, participants will be able to:

  • Understand the purpose and benefits of design patterns.
  • Apply Creational, Structural, and Behavioral patterns effectively in Java.
  • Improve code reusability, scalability, and maintainability.
  • Refactor existing codebases using design patterns.
Read more...

Kubernetes Design Patterns

 21 Hours

The evolution of microservices and containers in recent years has significantly changed how we design, develop, deploy and run software. Modern applications must be optimized for scalability, elasticity, failure, and change. Driven by these new demands, modern architectures require a different set of patterns and practices. In this training, we examine ways to identify, understand and adjust to these new requirements.

Audience
This training is intended for people who are somewhat familiar with container technology and with Kubernetes concepts but are perhaps lacking the real world experience. It is based on use cases, and lessons learnt from real life projects with the intention of making people inspired to create and manage even better cloud native applications.

  • Developers
  • Operations
  • DevOps
  • QA Engineers
  • IT Project Managers

Format of the Course

  • Interactive lecture and discussion
  • Lots of exercises and practice
  • Handson implementation in a live-lab environment

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
Read more...

Design Patterns

 14 Hours

There are plenty of tried and tested patterns widely available to everyone. Sometimes it is a matter of changing the names and implementing the pattern in a specific technology. It can save hundreds of hours, which otherwise would be spent on design and testing. Training Goals This course has two goals: first, it allows you to reuse widely-known patterns, second, it allows you to create and reuse patterns specific to your organization. It helps you to estimate how patterns can reduce costs, systematize the design process and generate a code framework based on your patterns. Audience Software designers, business analysts, project managers, programmers and developers as well as operational managers and software division managers. Course Style The course focuses on use cases and their relationship with a specific pattern. Most of the examples are explained in UML and in simple Java examples (the language can change if the course is booked as a closed course). It guides you through the sources of the patterns as well as showing you how to catalogue and describe patterns which can be reused across your organization.

Read more...

Design Patterns in C#

 14 Hours

Target group:

Technical Team Leader, Software Developer

Learning objective:

The purpose of training is to acquire the ability to design advanced development / project structures in C #.

During the course, students become familiar with the MSDN resources and tools to support the development process, such as Microsoft Visual Studio, ReSharper.

Read more...

Design Patterns in PHP

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at intermediate-level PHP developers who wish to apply design patterns effectively in their projects.

By the end of this training, participants will be able to:

  • Understand the purpose and benefits of design patterns.
  • Identify and implement appropriate design patterns for common scenarios.
  • Structure PHP applications using industry-recognized best practices.
  • Integrate patterns into modern frameworks such as Symfony or Zend.
Read more...

JavaScript - Advanced Programming

 14 Hours

The training is designed for JavaScript developers, designing and implementing advanced Internet applications. Topics discussed during the training aimed at bringing best practices in JavaScript programming and highlight the most common mistakes. An important point of the training is to discuss the available object-oriented programming with JavaScript syntax.

Read more...

Kubernetes Design Patterns and Extensions

 14 Hours

Kubernetes is an open-source platform for automating all development stages of containerized applications. Design patterns are iterable solutions to software development problems pertinent to software design. Kubernetes extensions are utilized for configuring and supporting Kubernetes clusters. With the help of Kubernetes design patterns and extensions, users of the platform can achieve CI/CD approaches while maintaining scalability and flexibility of software applications.

This instructor-led, live training (online or onsite) is aimed at developers and DevOps engineers who wish to leverage Kubernetes design patterns and extensions to create enterprise applications on Kubernetes clusters.

By the end of this training, participants will be able to:

  • Set up a Kubernetes cluster and configure the necessary DevOps tools.
  • Understand the fundamentals of software design patterns and Kubernetes extensions.
  • Utilize Kubernetes extensions and design patterns when interacting with Kubernetes API.
  • Develop customized Kubernetes resources and apply dynamic controllers to a cluster.
  • Manage and secure any Kubernetes environment with the help of Kubernetes plugins.
  • Integrate DevOps networking models to existing and prospective Kubernetes projects.

Format of the Course

  • Interactive lecture and discussion.
  • Lots of exercises and practice.
  • Hands-on implementation in a live-lab environment.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
Read more...

Microservice Patterns: Migrating from a Monolithic to a Microservice Architecture with .Net

 14 Hours

Microservice architecture is an approach to developing a software application as a suite of small, independent services, each running in its own process and communicating with lightweight mechanisms such as an HTTP resource API. These services can be efficiently deployed using continuous automation systems and bypass the need for centralized management. Microservices can be written in different programming languages and integrate with different data storage systems.

This instructor-led, live training is aimed at enterprise developers and architects. It introduces microservice architecture from a .Net perspective, presents migration strategies from a monolithic system, and walks participants through the creation and deployment of a sample microservice-based application.

By the end of this training, participants will be able to:

  • Understand when to use and when not to use microservice architecture
  • Create and implement a testing strategy for microservices
  • Deploy a sample microservice-based application into a production environment
  • Refactor a monolithic application into services

Audience

  • Developers
  • Architects

Format of the course

  • Part lecture, part discussion, exercises and heavy hands-on practice
Read more...

Object Oriented Design using Design Patterns

 14 Hours

Objective:

Helping Technical Analysts and Designers to understand how to go through software implementation of the requirements, ensuring traceability between business specifications and the software code.

This 2 day training course aims at assisting technical analysts and designers in designing specifications described by the business analysts. After transformation into software component representations, the resulting system components trace system requirements toward software component structures.

Finally, these technical specifications are implemented in software code and tested upon component basis. The resulting software components provide good level of reactivity to changes as they allow to trace separately toward the implementation level the system behaviours layer by layer (from the user interfaces toward business objects layer through the application components where the usage choices of the actors are stored.

Read more...

PHP Patterns and Refactoring

 21 Hours

The course is designed for experienced programmers who want to explore issues related to the use of patterns and refactoring. Each participant know the properties and practical examples of the use of these patterns, which in turn will enable the efficient build correct the application code.

Read more...

Technical Architecture and Patterns

 21 Hours

With the emergence of very complex distributed systems, complexity of a single system moved to the complexity of the architecture of the group of systems. This course covers the relationship of Software Architecture with Technical Enterprise Architecture. These two areas are interrelated in a way which currently is not well described. For example, splitting complex monolithic system into two systems communicating via web services will trigger substantial changes to both the new systems, and the architecture between them.

This course will cover trade-offs, currently common patterns and solutions for managing complex systems and communication within and between them.

Read more...

Last Updated:

Testimonials (4)

Trainer knowledge, involvement, and rapport

Adam Kuklewski - GE Medical Systems Polska

Course - Technical Architecture and Patterns

The explanations and interactivity of the trainer, he really brought the subject well; and even-though I was probably not experienced enough, I did learn a lot from it!

Pieter Bruynseels - Spot Buy Center BV

Course - Design Patterns

I liked the platform we used. It was really nice and easy to use. I liked the typescript section, the part about namespaces and modules.

Robert - DB Global Technology

Course - JavaScript - Advanced Programming

on how khoebib help everyone if there is a problem.

Kim Justine Agoncillo - Metropolitan Bank and Trust Company

Course - Microservice Patterns: Migrating from a Monolithic to a Microservice Architecture with .Net

Upcoming Courses

Design Patterns (GoF) for Java

2026-05-27 9:30 am
21 hours
Totowa, NJ – Regus at Riverview Drive
$ 4054 (Online)
$ 5854 (Classroom)

Kubernetes Design Patterns

2026-06-10 9:30 am
21 hours
Princeton, NJ – Regus at Overlook Business Center
$ 3330 (Online)
$ 5130 (Classroom)

PHP Patterns and Refactoring

2026-06-24 9:30 am
21 hours
Totowa, NJ – Regus at Riverview Drive
$ 4054 (Online)
$ 5854 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

Design Patterns Consulting
Online Design Patterns training in New Jersey, Design Patterns training courses in New Jersey, Weekend Design Patterns courses in New Jersey, Evening Design Patterns training in New Jersey, Design Patterns instructor-led in New Jersey, Design Patterns coaching in New Jersey, Evening Design Patterns courses in New Jersey, Design Patterns trainer in New Jersey, Design Patterns instructor in New Jersey, Design Patterns private courses in New Jersey, Design Patterns one on one training in New Jersey, Design Patterns on-site in New Jersey, Design Patterns instructor-led in New Jersey, Design Patterns boot camp in New Jersey, Design Patterns classes in New Jersey, Online Design Patterns training in New Jersey, Weekend Design Patterns training in New Jersey