Detroit, MI - Renaissance Center

400 Renaissance Center, Detroit, United States, 48243

The GM Renaissance Center is conveniently located in downtown Detroit and easily accessed by car via Interstates 75 or 94, with secure underground parking available on site. Travelers flying into Detroit Metropolitan Airport (DTW) can expect a 25–30 minute trip by taxi or rideshare via I‑94. Public transit is efficient: the Detroit People Mover stops directly at the Renaissance Center station, and DDOT routes 3 and 9 serve nearby Jefferson Avenue. Pedestrian skywalks provide safe indoor access from downtown hotels, parking garages, and the riverwalk.

Ann Arbor, MI – Regus - South State Commons I

2723 S State St, Ann Arbor, United States, 48104

Regus South State Commons I is conveniently located off I‑94 via Exit 177 (State Street), with easy access to downtown Ann Arbor and surrounding suburbs. The building offers free on-site surface parking for guests. From Detroit Metropolitan Airport (DTW), the venue can be reached in approximately 20–25 minutes by taxi or rideshare via I‑94 West. Local public transit service (TheRide) operates Route 24 along South State Street, with a stop within a short 2-minute walk of the building.
NobleProg Training Place, City Grand Rapids, MI - Regus – Calder Plaza

Grand Rapids, MI - Regus – Calder Plaza

250 Monroe Ave NW, Grand Rapids, United States, 49503

The venue sits centrally at 250 Monroe Avenue NW in downtown Grand Rapids, easily accessed by car via US‑131 or I‑196—with connections via Monroe or Ottawa exits—and offers shared underground and surface parking. From Gerald R. Ford International Airport, take I‑96 East then I‑196 West into the city; the drive is about 20 minutes. Public transit through Rapid bus routes stops near Monroe or Ottawa Avenue, just a short walk from the Regus entrance; the downtown area is pedestrian-friendly.
NobleProg Training Place, City Lansing, MI - Regus - One Michigan Avenue

Lansing, MI - Regus - One Michigan Avenue

120 North Washington Square, Lansing, United States, 48933

The venue is located in the heart of Lansing’s central business district at 120 North Washington Square, easily accessible by car via I‑496 or US‑127 with convenient street parking and a nearby parking ramp. From Capital Region International Airport (LAN), the location is approximately a 12‑minute drive west via I‑96 and US‑127, with taxis and rideshares readily available. Public transit users can take CATA bus routes that stop just a block away on Washington or Grand Avenue, offering seamless access to the venue.

Explore Our Courses

Electronic Control Unit (ECU) - Practical Vector

 28 Hours

This instructor-led, live training in Michigan (online or onsite) is aimed at intermediate-level automotive engineers and technicians who wish to gain hands-on experience in testing, simulating, and diagnosing ECUs using Vector tools like CANoe and CANape.

By the end of this training, participants will be able to:

  • Understand the role and function of ECUs in automotive systems.
  • Set up and configure Vector tools such as CANoe and CANape.
  • Simulate and test ECU communication on CAN and LIN networks.
  • Analyze data and perform diagnostics on ECUs.
  • Create test cases and automate testing workflows.
  • Calibrate and optimize ECUs using practical approaches.
Read more...

Electronic Control Unit (ECU) - Theoretical Vector

 21 Hours

This instructor-led, live training in Michigan (online or onsite) is aimed at intermediate-level automotive engineers and embedded systems developers who wish to understand the theoretical aspects of ECUs, focusing on Vector-based tools and methodologies used in automotive design and development.

By the end of this training, participants will be able to:

  • Understand the architecture and functions of ECUs in modern vehicles.
  • Analyze communication protocols used in ECU development.
  • Explore Vector-based tools and their theoretical applications.
  • Apply model-based development principles to ECU design.
Read more...

Circuits and Electronics Fundamentals

 14 Hours

This instructor-led, live training in Michigan (online or onsite) is aimed at engineers and computer scientists who wish to apply the fundamentals of circuits and electronics to design devices and systems that utilize properties of electrical components for the development of hardware functionalities.

By the end of this training, participants will be able to:

  • Set-up and configure the necessary tools and programs for circuits and circuit board development.
  • Understand the basic principles behind circuits and electronics engineering.
  • Utilize the primary electronic components in constructing efficient computer hardware technologies.
  • Optimize electronic devices by implementing circuit analysis methods.
  • Apply the fundamentals of electronics and circuits to the development of enterprise applications.
Read more...

Digital Signal Processing (DSP) Fundamentals

 21 Hours

This instructor-led, live training in Michigan (online or onsite) is aimed at engineers and scientists who wish to learn and apply DSP implementations to efficiently handle different signal types and gain better control over multi-channel electronic systems.

By the end of this training, participants will be able to:

  • Setup and configure the necessary software platform and tools for Digital Signal Processing.
  • Understand the concepts and principles that are foundational to DSP and its applications.
  • Familiarize themselves with DSP components and employ them in electronics systems.
  • Generate algorithms and operational functions using the results from DSP.
  • Utilize the basic features of DSP software platforms and design signal filters.
  • Synthesize DSP simulations and implement various types of filters for DSP.
Read more...

Last Updated:

Testimonials (1)

He answers my questions very well explained.

Khaled Almarzooqi - Beamtrail

Course - Circuits and Electronics Fundamentals

Upcoming Courses

Electronic Control Unit (ECU) - Theoretical Vector

2025-09-15 9:30 am
21 hours
Ann Arbor, MI – Regus - South State Commons I
$ 4054 (Online)
$ 5554 (Classroom)

Electronic Control Unit (ECU) - Theoretical Vector

2025-09-29 9:30 am
21 hours
Ann Arbor, MI – Regus - South State Commons I
$ 4054 (Online)
$ 5554 (Classroom)

Electronic Control Unit (ECU) - Practical Vector

2025-10-13 9:30 am
28 hours
Ann Arbor, MI – Regus - South State Commons I
$ 5405 (Online)
$ 7405 (Classroom)

Electronic Control Unit (ECU) - Theoretical Vector

2025-10-27 9:30 am
21 hours
Ann Arbor, MI – Regus - South State Commons I
$ 4054 (Online)
$ 5554 (Classroom)

Electronic Control Unit (ECU) - Theoretical Vector

2025-11-10 9:30 am
21 hours
Ann Arbor, MI – Regus - South State Commons I
$ 4054 (Online)
$ 5554 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

Electronics Consulting
Online Electronics training in Michigan, Electronics training courses in Michigan, Weekend Electronics courses in Michigan, Evening Electronics training in Michigan, Electronics instructor-led in Michigan, Online Electronics training in Michigan, Weekend Electronics training in Michigan, Electronics instructor in Michigan, Electronics instructor-led in Michigan, Electronics trainer in Michigan, Electronics on-site in Michigan, Electronics boot camp in Michigan, Electronics coaching in Michigan, Electronics classes in Michigan, Evening Electronics courses in Michigan, Electronics one on one training in Michigan, Electronics private courses in Michigan