Columbia, SC – Regus at Meridian Building

1320 Main Street, Suite 300, Columbia, United States, 29201

The venue is located in the heart of Columbia’s Central Business District within the Meridian Building on Main Street, easily reachable by car via I‑77 or I‑20 with attached eight-level garage parking and nearby municipal lots. From Columbia Metropolitan Airport (CAE), about 12 miles southwest, a taxi or rideshare takes approximately 15–20 minutes via Hwy 48 and Elmwood Avenue. Public transit access is convenient: several COMET bus routes stop within a block, and the Columbia Amtrak station is a 5‑minute walk away—making it accessible even for attendees without a vehicle.

North Charleston, SC – Regus at Faber Center

4000 Faber Pl Dr, Suite 300, North Charleston, United States, 29405

The venue sits within the four-acre Executive Park at Faber Center, just off I‑526 and minutes from Charleston International Airport. Visitors arriving by car benefit from free and adjacent paid parking available on-site and around the business park. From Charleston International Airport (CHS), which is approximately 4 miles away, a taxi or rideshare takes around 10 minutes via International Boulevard. Public transit options include CARTA buses clearing stops in the vicinity, though services are limited and attendees may prefer car or rideshare—making it convenient even for those without a car.

Charleston, SC – Regus at Downtown Charleston

170 Meeting Street, Suite 110, Charleston, United States, 29401

The venue is located in vibrant downtown Charleston on Meeting Street, easily accessible by car via I‑26 or U.S. 17, with several public parking garages nearby. Visitors arriving at Charleston International Airport (CHS), approximately 12 miles northwest, can reach the venue in about 20–25 minutes by taxi or rideshare via I‑26 East then U.S. 17 South. Public transit is available via CARTA bus routes that stop along Meeting and King Streets, placing the center within a short walk of several lines serving the downtown district

Explore Our Courses

Omron PLC Motion Control with Sysmac Studio

 14 Hours

This instructor-led, live training in South Carolina (online or onsite) is aimed at intermediate-level automation engineers and control system designers who wish to implement motion control solutions using Omron PLCs.

By the end of this training, participants will be able to:

  • Understand fundamental motion control concepts and their applications.
  • Configure motion hardware and software in Sysmac Studio.
  • Program and optimize single-axis and multi-axis motion control.
  • Implement coordinated motion strategies, including interpolation and synchronization.
Read more...

Omron PLC with Sysmac Studio

 35 Hours

This instructor-led, live training in South Carolina (online or onsite) is aimed at intermediate-level programmers who wish to enhance their skills in Omron PLC programming, HMI configuration, motion control, and safety systems.

By the end of this training, participants will be able to:

  • Configure and program Omron PLCs using Sysmac Studio.
  • Understand and apply IEC concepts in ladder logic and structured text programming.
  • Develop motion control programs for single-axis and coordinated movements.
  • Create HMI interfaces using the NA series and integrate them with Sysmac controllers.
  • Implement and simulate safety standards and programs using NX series safety hardware.
Read more...

Introduction to OMRON PLC programming

 21 Hours

This course introduces the student to the basics of Programmable Logic Controllers (PLC). After the discussion of the fundamental concept of PLCs the basic Ladder Diagram instructions are learned and practiced in Industrial Automation tasks. Audience - Electrical Specialists - Mechanical Engineers - Programmers with interest in Industrial Automation

Read more...

Last Updated:

Testimonials (1)

PLC basic knowledge

Bartosz - Phillips-Medisize Poland

Course - Introduction to OMRON PLC programming

Upcoming Courses

Omron PLC with Sysmac Studio

2025-11-17 9:30 am
35 hours
North Charleston, SC – Regus at Faber Center
$ 6757 (Online)
$ 6757 (Classroom)

Omron PLC Motion Control with Sysmac Studio

2025-12-01 9:30 am
14 hours
North Charleston, SC – Regus at Faber Center
$ 2703 (Online)
$ 2703 (Classroom)

Omron PLC with Sysmac Studio

2025-12-15 9:30 am
35 hours
North Charleston, SC – Regus at Faber Center
$ 6757 (Online)
$ 6757 (Classroom)

Omron PLC with Sysmac Studio

2025-12-29 9:30 am
35 hours
North Charleston, SC – Regus at Faber Center
$ 6757 (Online)
$ 6757 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

OMRON PLC Consulting
Online OMRON PLC (Programmable Logic Controllers) training in South Carolina, OMRON Programmable Logic Controllers (PLC) training courses in South Carolina, Weekend OMRON PLC (Programmable Controllers) courses in South Carolina, Evening OMRON Programmable Logic Controllers (PLC) training in South Carolina, OMRON PLC (Programmable Logic Controllers) instructor-led in South Carolina, Online OMRON PLC training in South Carolina, OMRON Programmable Logic Controllers one on one training in South Carolina, OMRON PLC (Programmable Logic Controllers) trainer in South Carolina, OMRON Programmable Logic Controllers (PLC) private courses in South Carolina, OMRON Programmable Logic Controllers (PLC) on-site in South Carolina, Evening OMRON PLC (Programmable Controllers) courses in South Carolina, OMRON Programmable Logic Controllers (PLC) boot camp in South Carolina, OMRON PLC (Programmable Controllers) instructor in South Carolina, OMRON Programmable Logic Controllers (PLC) coaching in South Carolina, OMRON PLC instructor-led in South Carolina, OMRON Programmable Logic Controllers (PLC) classes in South Carolina, Weekend OMRON PLC (Programmable Logic Controllers) training in South Carolina