Birmingham, AL – Regus at Shipt Tower (Downtown)

420 20th St S, Suite 2200, Birmingham, United States, 35203

The venue is located in downtown Birmingham within the prominent Shipt Tower at 420 North 20th Street, easily reached by car via I‑59, I‑20, or I‑65, with nearby public parking garages. From Birmingham–Shuttlesworth International Airport (BHM), a taxi or rideshare typically takes 10–15 minutes via I‑20 West and US‑31 North. Public transit users can take MAX bus routes stopping on 20th Street or near 4th Avenue North, placing the centre within a few minutes’ walk—offering good access for attendees without cars.

Birmingham, AL – Regus at Chase Corporate Center

1 Chase Corporate Drive, Suite 400, Birmingham, United States, 35244

The venue sits in the Chase Corporate Center just off Highway 31 near I‑459 and Highway 280, within a serene, landscaped corporate campus. Visitors arriving by car benefit from plentiful free parking on-site and adjoining garages. From Birmingham–Shuttlesworth International Airport (BHM), taxis or rideshares take around 15–20 minutes via I‑459 North and Highway 280. Public transit riders can use MAX bus routes stopping close to the corporate park, though most attendees prefer driving or rideshare. The tranquil campus setting offers easy access to nearby gyms, retail, and restaurants for break or post-session gatherings.
NobleProg Training Place, City Birmingham, AL - Regus at One Perimeter Park

Birmingham, AL - Regus at One Perimeter Park

1 Perimeter Park South, Birmingham, United States, 35243

The venue is located in the Perimeter Park business complex off I‑459 near Highway 280, offering easy access by car with ample on-site parking. Visitors arriving by air from Birmingham‑Shuttlesworth International Airport (BHM), about 15 miles away, can expect a traditional taxi or rideshare ride of approximately 20–25 minutes via I‑459 South and Highway 280. Public transit options include nearby Jefferson County Transit buses that run along Valleydale Road, with stops within a few blocks of Perimeter Park, making it reasonably accessible without a car.

Huntsville, AL – Regus at Cummings Research Park

7027 Old Madison Pike NW, Suite 108, Huntsville, United States, 35806

The venue is located in Cummings Research Park, a premier business and technology hub with easy access by car via I‑565 or U.S. Highway 72, and plenty of on-site parking available. From Huntsville International Airport (HSV), approximately 10 miles southeast, taxis or rideshares take around 15–20 minutes heading northwest on U.S. 72. Those relying on public transit can take Rocket City Transit route 22, which stops near the park entrance, offering a convenient option for attendees without a car.
NobleProg Training Place, City Montgomery, AL - Regus at RSA Dexter Avenue

Montgomery, AL - Regus at RSA Dexter Avenue

445 Dexter Avenue, Suite 4050, Montgomery, United States,  36104

The venue is located in the heart of downtown Montgomery on Dexter Avenue, easily accessible by car via I‑65 and US‑80; nearby surface and garage parking are available in the RSA building complex. From Montgomery Regional Airport (MGM), about 9 miles southeast of downtown, a taxi or rideshare typically takes 15–20 minutes via I‑65 North and I‑85 North. Public transit is available via the Montgomery Transit System (MTS) with bus routes running along Court Street and Commerce Street, both within a few blocks’ walk of the venue.

Explore Our Courses

IoT Programming with Python

 14 Hours

Internet of Things (IoT) is a network infrastructure that connects physical objects and software applications wirelessly, allowing them to communicate with each other and exchange data via network communications, cloud computing, and data capture. Python is a high-level programming language recommended for IoT due to its clear syntax and large community support.

In this instructor-led, live training, participants will learn how to program IoT solutions with Python.

By the end of this training, participants will be able to:

  • Understand the fundamentals of IoT architecture
  • Learn the basics of using Raspberry Pi
  • Install and configure Python on Raspberry Pi
  • Learn the benefits of using Python in programming IoT systems
  • Build, test, deploy, and troubleshoot an IoT system using Python and Raspberry Pi

Audience

  • Developers
  • Engineers

Format of the course

  • Part lecture, part discussion, exercises and heavy hands-on practice

Note

  • To request a customized training for this course, please contact us to arrange.
Read more...

Introduction to IoT Using Raspberry Pi

 14 Hours

Internet of Things (IoT) is a network infrastructure that connects physical objects and software applications wirelessly, allowing them to communicate with each other and exchange data via network communications, cloud computing, and data capture.

In this instructor-led, live training, participants will learn the fundamentals of IoT as they step through the creation of an IoT sensor system using the Raspberry Pi.

By the end of this training, participants will be able to:

  • Understand the principles of IoT, including IoT components and communication techniques
  • Learn how to set up the Raspberry Pi specifically for IoT applications
  • Build and deploy their own IoT Sensor System

Audience

  • Hobbyists
  • Hardware/software engineers and technicians
  • Technical persons in all industries
  • Beginner developers

Format of the course

  • Part lecture, part discussion, exercises and heavy hands-on practice

Note

  • Raspberry Pi supports various operating systems and programming languages. This course will use Linux-based Raspbian as the operating system and Python as the programming language. To request a specific setup, please contact us to arrange.
  • Participants are responsible for purchasing the Raspberry Pi hardware and components.
Read more...

Raspberry Pi for Beginners

 14 Hours

Raspberry Pi is a very small, single-board computer.

In this instructor-led, live training, participants will learn how to set up and program the Raspberry Pi to serve as an interactive and powerful embedded system.

By the end of this training, participants will be able to:

  • Set up an IDE (integrated development environment) for maximum development productivity
  • Program Raspberry Pi to control devices such as motion sensor, alarms, web servers and printers.
  • Understand Raspberry Pi's architecture, including inputs and connectors for add-on devices.
  • Understand the various options in programming languages and operating systems
  • Test, debug, and deploy the Raspberry Pi to solve real world problems

Audience

  • Developers
  • Hardware/software technicians
  • Technical persons in all industries
  • Hobbyists

Format of the course

  • Part lecture, part discussion, exercises and heavy hands-on practice

Note

  • Raspberry Pi supports various operating systems and programming languages. This course will use  Linux-based Raspbian as the operating system and Python as the programming language. To request a specific setup, please contact us to arrange.
  • Participants are responsible for purchasing the Raspberry Pi hardware and components.
Read more...

Raspberry Pi + OpenCV for Facial Recognition

 21 Hours

This instructor-led, live training introduces the software, hardware, and step-by-step process needed to build a facial recognition system from scratch. Facial Recognition is also known as Face Recognition.

The hardware used in this lab includes Rasberry Pi, a camera module, servos (optional), etc. Participants are responsible for purchasing these components themselves. The software used includes OpenCV, Linux, Python, etc.

By the end of this training, participants will be able to:

  • Install Linux, OpenCV and other software utilities and libraries on a Rasberry Pi.
  • Configure OpenCV to capture and detect facial images.
  • Understand the various options for packaging a Rasberry Pi system for use in real-world environments.
  • Adapt the system for a variety of use cases, including surveillance, identity verification, etc.

Format of the course

  • Part lecture, part discussion, exercises and heavy hands-on practice

Note

  • Other hardware and software options include: Arduino, OpenFace, Windows, etc. If you wish to use any of these, please contact us to arrange.
Read more...

Last Updated:

Testimonials (2)

Practical examples and wider context given.

James - Mitsubishi Electric R&D Centre Europe BV (MERCE-UK)

Course - IoT Programming with Python

Sean was a dynamic speaker and the hands-on exercises were very interesting and I can see how they will be really applicable.

Temira Koenig - Yeshiva University

Course - Raspberry Pi for Beginners

Upcoming Courses

Introduction to IoT Using Raspberry Pi

2025-08-25 9:30 am
14 hours
Huntsville, AL – Regus at Cummings Research Park
$ 2220 (Online)
$ 2220 (Classroom)

Raspberry Pi + OpenCV for Facial Recognition

2025-09-08 9:30 am
21 hours
Huntsville, AL – Regus at Cummings Research Park
$ 4054 (Online)
$ 4054 (Classroom)

IoT Programming with Python

2025-09-22 9:30 am
14 hours
Huntsville, AL – Regus at Cummings Research Park
$ 2220 (Online)
$ 2220 (Classroom)

Raspberry Pi for Beginners

2025-10-06 9:30 am
14 hours
Huntsville, AL – Regus at Cummings Research Park
$ 2703 (Online)
$ 2703 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

Raspberry Pi Consulting
Online Raspberry Pi training in Alabama, Raspberry Pi training courses in Alabama, Weekend Raspberry Pi courses in Alabama, Evening Raspberry Pi training in Alabama, Raspberry Pi instructor-led in Alabama, Raspberry Pi boot camp in Alabama, Raspberry Pi coaching in Alabama, Raspberry Pi one on one training in Alabama, Raspberry Pi private courses in Alabama, Raspberry Pi trainer in Alabama, Raspberry Pi instructor in Alabama, Raspberry Pi instructor-led in Alabama, Raspberry Pi classes in Alabama, Online Raspberry Pi training in Alabama, Raspberry Pi on-site in Alabama, Evening Raspberry Pi courses in Alabama, Weekend Raspberry Pi training in Alabama