Online or onsite, instructor-led live Robotics training courses demonstrate through interactive hands-on practice the fundamentals and advanced concepts of Robotics.
Robotics training is available as "online live training" or "onsite live training". Online live training (aka "remote live training") is carried out by way of an interactive, remote desktop. Pennsylvania onsite live Robotics trainings can be carried out locally on customer premises or in NobleProg corporate training centers.
NobleProg -- Your Local Training Provider
Allentown, PA – Grand Plaza
835 Hamilton St, Allentown, United States, 18101
The venue is located in the iconic Grand Plaza building in downtown Allentown, accessible by car via I‑78 or US‑22, with nearby public parking lots and street spaces. From Lehigh Valley International Airport (ABE), about 6 miles north, a taxi or rideshare takes approximately 10–15 minutes via Airport Road and Hamilton Street. Public transit users can take LANta bus routes that stop directly on Hamilton Street, with the center just steps from the bus stop, offering convenient access without a vehicle.
Harrisburg, PA – Regus at Campus Square
1426 North 3rd Street, 4th Floor, Harrisburg, United States, 17102
The venue is situated in the modern LEED Gold–certified Campus Square building at 1426 N 3rd Street in Midtown Harrisburg, easily reachable by car via I‑83 or Route 230, with ample on-site parking and nearby municipal garages. From Harrisburg International Airport (MDT), about 12 miles southwest, a taxi or rideshare typically takes 15–20 minutes via PA‑283 West and I‑83 North. Public transit is convenient: several Capital Area Transit buses stop within a block, and the building is within walking distance of major routes and complemented by Midtown’s walkable environment and local amenities.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at intermediate-level to advanced-level engineers and technicians who wish to learn how to program, operate, and optimize Fanuc and Epson robotic systems for industrial applications.
By the end of this training, participants will be able to:
Understand the architecture and functionalities of Fanuc and Epson robots.
Program robot movements, logic, and sensor integrations.
Implement safety protocols and troubleshooting techniques.
Optimize robotic workflows for improved efficiency.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at intermediate-level participants who wish to explore the role of collaborative robots (cobots) and other human-centric AI systems in modern workplaces.
By the end of this training, participants will be able to:
Understand the principles of Human-Centric Physical AI and its applications.
Explore the role of collaborative robots in enhancing workplace productivity.
Identify and address challenges in human-machine interactions.
Design workflows that optimize collaboration between humans and AI-driven systems.
Promote a culture of innovation and adaptability in AI-integrated workplaces.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at beginner-level to intermediate-level marine engineers and technicians, and offshore operations personnel who wish to gain proficiency in operating and maintaining ROVs for underwater tasks.
By the end of this training, participants will be able to:
Understand the history, types, and applications of ROVs.
Identify and explain the components and systems of an ROV.
Navigate and communicate effectively with ROVs underwater.
Pilot ROVs with precision in various underwater scenarios.
Perform routine maintenance and troubleshoot common issues.
Apply safety protocols during underwater operations.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at beginner-level robotics engineers who wish to thoroughly understand operating and programming the ABB IRB 2600ID robot for welding tasks.
By the end of this training, participants will be able to:
Understand how robotics is applied in welding.
Develop proficiency in programming the ABB IRB 2600ID robot for various welding tasks.
Learn to safely and effectively operate the ABB IRB 2600ID robot.
Understand the safety standards and procedures relevant to robotic welding operations.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at advanced-level robotics engineers and AI researchers who wish to utilize Multimodal AI for integrating various sensory data to create more autonomous and efficient robots that can see, hear, and touch.
By the end of this training, participants will be able to:
Implement multimodal sensing in robotic systems.
Develop AI algorithms for sensor fusion and decision-making.
Create robots that can perform complex tasks in dynamic environments.
Address challenges in real-time data processing and actuation.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at intermediate-level participants who wish to enhance their skills in designing, programming, and deploying intelligent robotic systems for automation and beyond.
By the end of this training, participants will be able to:
Understand the principles of Physical AI and its applications in robotics and automation.
Design and program intelligent robotic systems for dynamic environments.
Implement AI models for autonomous decision-making in robots.
Leverage simulation tools for robotic testing and optimization.
Address challenges such as sensor fusion, real-time processing, and energy efficiency.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at electrical engineers or anyone interested to have a more profound knowledge of semiconductors.
By the end of this training, participants will be able to:
Understand the concept of energy and conduction band diagrams.
Understand the internal structure of diodes and how they work.
Have an in-depth understanding of intrinsic and extrinsic semiconductors.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at beginner-level to intermediate-level participants who wish to learn how to use drones and photogrammetry techniques for infrastructure supervision in construction projects.
By the end of this training, participants will be able to:
Understand the fundamentals of drones and photogrammetry.
Develop and execute drone flight plans for construction sites.
Perform photogrammetry tracking and create detailed maps and 3D models.
Use photogrammetry data for infrastructure supervision and issue detection.
Apply drone technology to improve construction site safety and efficiency.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at beginner-level to intermediate-level and potentially advanced-level robotics developers who wish to learn how to use ROS to program mobile robots using Python.
By the end of this training, participants will be able to:
Set up a development environment that includes ROS, Python, and a mobile robot platform.
Create and run ROS nodes, topics, services, and actions using Python.
Use ROS tools and utilities to monitor and debug ROS applications.
Use ROS packages and libraries to perform common tasks for mobile robots.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at electrical engineers or anyone interested to learn about the fundamentals of semiconductors and use to create different innovations in various fields.
By the end of this training, participants will be able to:
Know how electronic devices like diodes and transistors work.
Analyze the carrier statistics in semiconductors.
Understand the carrier dynamics of semiconductors and their resulting conduction properties.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at engineers and developers who wish to design, develop, and test aerial vehicles through exploring various aerial robotics concepts and tools.
By the end of this training, participants will be able to:
Understand the basics of aerial robotics.
Model and design UAVs and quadrotors.
Learn about the basics of flight control and motion planning.
Learn how to use different simulation tools for aerial robotics.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at engineers who wish to program and create robots through basic AI methods.
By the end of this training, participants will be able to:
Implement filters (Kalman and particle) to enable the robot to locate moving objects in its environment.
Implement search algorithms and motion planning.
Implement PID controls to regulate a robot's movement within an environment.
Implement SLAM algorithms to enable a robot to map out an unknown environment.
In this instructor-led, live training in Pennsylvania (online or onsite), participants will learn the different technologies, frameworks and techniques for programming different types of robots to be used in the field of nuclear technology and environmental systems.
The 6-week course is held 5 days a week. Each day is 4-hours long and consists of lectures, discussions, and hands-on robot development in a live lab environment. Participants will complete various real-world projects applicable to their work in order to practice their acquired knowledge.
The target hardware for this course will be simulated in 3D through simulation software. The ROS (Robot Operating System) open-source framework, C++ and Python will be used for programming the robots.
By the end of this training, participants will be able to:
Understand the key concepts used in robotic technologies.
Understand and manage the interaction between software and hardware in a robotic system.
Understand and implement the software components that underpin robotics.
Build and operate a simulated mechanical robot that can see, sense, process, navigate, and interact with humans through voice.
Understand the necessary elements of artificial intelligence (machine learning, deep learning, etc.) applicable to building a smart robot.
Implement filters (Kalman and Particle) to enable the robot to locate moving objects in its environment.
Implement search algorithms and motion planning.
Implement PID controls to regulate a robot's movement within an environment.
Implement SLAM algorithms to enable a robot to map out an unknown environment.
Extend a robot's ability to perform complex tasks through Deep Learning.
Test and troubleshoot a robot in realistic scenarios.
In this instructor-led, live training in Pennsylvania (online or onsite), participants will learn the different technologies, frameworks and techniques for programming different types of robots to be used in the field of nuclear technology and environmental systems.
The 4-week course is held 5 days a week. Each day is 4-hours long and consists of lectures, discussions, and hands-on robot development in a live lab environment. Participants will complete various real-world projects applicable to their work in order to practice their acquired knowledge.
The target hardware for this course will be simulated in 3D through simulation software. The code will then be loaded onto physical hardware (Arduino or other) for final deployment testing. The ROS (Robot Operating System) open-source framework, C++ and Python will be used for programming the robots.
By the end of this training, participants will be able to:
Understand the key concepts used in robotic technologies.
Understand and manage the interaction between software and hardware in a robotic system.
Understand and implement the software components that underpin robotics.
Build and operate a simulated mechanical robot that can see, sense, process, navigate, and interact with humans through voice.
Understand the necessary elements of artificial intelligence (machine learning, deep learning, etc.) applicable to building a smart robot.
Implement filters (Kalman and Particle) to enable the robot to locate moving objects in its environment.
Implement search algorithms and motion planning.
Implement PID controls to regulate a robot's movement within an environment.
Implement SLAM algorithms to enable a robot to map out an unknown environment.
Test and troubleshoot a robot in realistic scenarios.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at developers and technical persons who wish to design and develop an unmanned drone.
By the end of this training, participants will be able to:
Setup a suitable development environment.
Select and apply the right tools for programming a drone.
Understand and configure the firmware, middleware and API stack.
Test and debug their code using drone simulation software.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at developers who wish to install, configure, and manage AWS RoboMaker capabilities to create, simulate, and deploy applications for robots and autonomous vehicles and devices.
By the end of this training, participants will be able to use AWS RoboMaker to build, simulate, deploy, manage, test, and monitor robot applications.
A bot or chatbot is like a computer assistant that is used to automate user interactions on various messaging platforms and get things done faster without the need for users to speak to another human.
In this instructor-led, live training, participants will learn how to get started in developing a bot as they step through the creation of sample chatbots using bot development tools and frameworks.
By the end of this training, participants will be able to:
Understand the different uses and applications of bots
Understand the complete process in developing bots
Explore the different tools and platforms used in building bots
Build a sample chatbot for Facebook Messenger
Build a sample chatbot using Microsoft Bot Framework
Audience
Developers interested in creating their own bot
Format of the course
Part lecture, part discussion, exercises and heavy hands-on practice
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at anyone who wishes to understand the basics of UAS and apply drone technology in planning, operations, management, and analysis for various industries.
By the end of this training, participants will be able to:
Gain fundamental knowledge of UAVs and drones.
Learn about drone classifications and uses to find suitable UAVs that address different needs.
Evaluate delivery options and regulations for the convenient operation of drones.
Understand the risks and ethics of using drone technology.
Explore future uses and capabilities of UAVs including integration with other technologies.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at agriculture technicians, researchers, and engineers who wish to apply aerial robotics in optimizing data collection and analysis for agriculture.
By the end of this training, participants will be able to:
Understand drone technology and regulations related to it.
Deploy drones to acquire, process, and analyze crop data to improve farming and agricultural methods.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at engineers who wish to learn about the applicability of artificial intelligence to mechatronic systems.
By the end of this training, participants will be able to:
Gain an overview of artificial intelligence, machine learning, and computational intelligence.
Understand the concepts of neural networks and different learning methods.
Choose artificial intelligence approaches effectively for real-life problems.
Implement AI applications in mechatronic engineering.
This classroom based training session will explore NLP techniques in conjunction with the application of AI and Robotics in business. Delegates will undertake computer based examples and case study solving exercises using Python
This classroom based training session will explore Robotics and Robotic Process Automation (RPA). Delegates will undertake computer based examples and case study solving exercises.
In this instructor-led, live training in Pennsylvania, participants will learn how to start using ROS for their robotics projects through the use of robotics visualization and simulation tools.
By the end of this training, participants will be able to:
Understand the basics of ROS.
Learn how to create a basic robotics project using ROS.
Learn how to use different tools for robotics including simulation and visualization tools.
A Smart Robot is an Artificial Intelligence (AI) system that can learn from its environment and its experience and build on its capabilities based on that knowledge. Smart Robots can collaborate with humans, working along-side them and learning from their behavior. Furthermore, they have the capacity for not only manual labor, but cognitive tasks as well. In addition to physical robots, Smart Robots can also be purely software based, residing in a computer as a software application with no moving parts or physical interaction with the world.
In this instructor-led, live training, participants will learn the different technologies, frameworks and techniques for programming different types of mechanical Smart Robots, then apply this knowledge to complete their own Smart Robot projects.
The course is divided into 4 sections, each consisting of three days of lectures, discussions, and hands-on robot development in a live lab environment. Each section will conclude with a practical hands-on project to allow participants to practice and demonstrate their acquired knowledge.
The target hardware for this course will be simulated in 3D through simulation software. The ROS (Robot Operating System) open-source framework, C++ and Python will be used for programming the robots.
By the end of this training, participants will be able to:
Understand the key concepts used in robotic technologies
Understand and manage the interaction between software and hardware in a robotic system
Understand and implement the software components that underpin Smart Robots
Build and operate a simulated mechanical Smart Robot that can see, sense, process, grasp, navigate, and interact with humans through voice
Extend a Smart Robot's ability to perform complex tasks through Deep Learning
Test and troubleshoot a Smart Robot in realistic scenarios
Audience
Developers
Engineers
Format of the course
Part lecture, part discussion, exercises and heavy hands-on practice
Note
To customize any part of this course (programming language, robot model, etc.) please contact us to arrange.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at technical persons who wish to set up or extend an RPA system with more intelligent capabilities.
By the end of this training, participants will be able to:
Install and configure UiPath IPA.
Enable robots to manage other robots.
Apply computer vision to locate screen objects with accuracy.
Enable robots that can detect language patterns and carry out sentiment analysis on unstructured content.
Read more...
Last Updated:
Testimonials (3)
its knowledge and utilization of AI for Robotics in the Future.
Ryle - PHILIPPINE MILITARY ACADEMY
Course - Artificial Intelligence (AI) for Robotics
I feel I get the core skills I need to understand how the ROS fits together, and how to structure projects in it.
Dan Goldsmith - Coventry University
Course - ROS: Programming for Robotics
Robotics sounds very complex etc, and Richard help us see this in a more friendly way and the possibilities the tool has.
Rolando Barquero - GLAXOSMITHKLINE PHARMACEUTICALS COSTA RICA
Online Robotics training in Pennsylvania, Robotics training courses in Pennsylvania, Weekend Robotics courses in Pennsylvania, Evening Robotics training in Pennsylvania, Robotics instructor-led in Pennsylvania, Robotics instructor-led in Pennsylvania, Robotics instructor in Pennsylvania, Robotics coaching in Pennsylvania, Evening Robotics courses in Pennsylvania, Robotics on-site in Pennsylvania, Robotics one on one training in Pennsylvania, Robotics classes in Pennsylvania, Robotics boot camp in Pennsylvania, Online Robotics training in Pennsylvania, Weekend Robotics training in Pennsylvania, Robotics trainer in Pennsylvania, Robotics private courses in Pennsylvania
.jpg)
