Get in Touch

Totowa, NJ – Regus at Riverview Drive

999 Riverview Dr 2nd Floor, Totowa, United States, 07512

The venue is located in a landscaped corporate park off Route 46 and I‑80, offering easy access by car and free on-site parking. From Newark Liberty International Airport (EWR), about 15 miles away, a taxi or rideshare ride via I‑78 West typically takes 20–25 minutes. Visitors arriving by car from New York City or northern NJ can use I‑80, I‑287, or the Garden State Parkway. Public transit is also convenient: NJ Transit and local bus routes stop near the Riverview campus, and the Little Falls train station is just a short rideshare or walk away.

Princeton, NJ – Regus at Overlook Business Center

100 Overlook Center, 2nd Floor, Princeton, United States, 08540

The venue is located just off Route 1 within a landscaped office park at Overlook Center, easily reached by car via I‑95 or US‑1, with complimentary on-site parking. From Newark Liberty or Philadelphia International Airports, travel takes approximately 1–1.5 hours via I‑95 and US‑1. Attendees can also arrive by train: New Jersey Transit and Amtrak serve Princeton Junction Station (about 3 miles away), with local shuttle or taxi options for the final leg. Public transit users can take local DART or Coach USA buses that stop at Route 1 and University Drive, followed by a brief walk to building entrance.

Newark, NJ – At One Gateway Center

One Gateway Center, Suite 2600, Newark, United States, 07102

The venue is situated within the iconic One Gateway Center, directly connected to Newark Penn Station via covered walkway, and is conveniently accessible by car via I‑95, I‑78, I‑280, and the New Jersey Turnpike, with public garages nearby. Visitors arriving from Newark Liberty International Airport (EWR), roughly 3 miles away, can expect a 10-minute taxi or rideshare ride via I‑78 West. Those coming by train benefit from Penn Station, which also connects by PATH service to Manhattan in under 20 minutes. Local NJ Transit and Newark Light Rail bus routes also serve the Gateway complex, offering seamless public transit access.

Jersey City, NJ – Regus at Hudson Street

101 Hudson Street, 21st Floor, Jersey City, united states, 07302

The venue is located on the 21st floor of the 42‑story Merrill Lynch Building at 101 Hudson Street in Paulus Hook, reachable by car via I‑78, I‑95, or the New Jersey Turnpike, with public and building parking available. From Newark Liberty Airport (EWR), about 8 miles away, taxis or rideshares take 15–20 minutes via I‑78 East. Attendees arriving by train can use Newark Penn or PATH to Exchange Place or Newport stations, then walk 5–7 minutes to the building. Multiple NJ Transit and local bus routes also serve the area.

Trenton, NJ – Base Camp Trenton

247 E Front St, Trenton, United States, 08611

The venue is located in downtown Trenton on Front Street, just off Route 29 and a short drive from I‑295, offering easy car access with street and municipal lot parking nearby. Visitors coming from Newark Liberty International Airport (EWR), about 45 miles northeast, can expect a taxi or rideshare ride of roughly 50–60 minutes via I‑95 South. Those arriving from Philadelphia International Airport (PHL), approximately 25 miles southwest, typically take about 35–45 minutes via I‑95 North. Public transit is also convenient—NJ Transit trains arrive at Trenton Transit Center just a few blocks away and local DART First State buses stop near Front Street, placing the venue within short walking distance for attendees without a car.

Subcategories (3)

Yocto Project

Yocto Project
Buildroot

Buildroot
OpenWrt

OpenWrt

Explore Our Courses

Buildroot: a Firmware Generator for Embedded Systems

 7 Hours

Buildroot is an open-source project that contains scripts that produce a cross-compilation toolchain, a customizable root filesystem image, and a Linux kernel for embedded devices. During this practical course, participants will learn how to use it:

  • How to select software that goes into the root filesystem.
  • How to add new packages and modify existing ones.
  • How to add support for new embedded boards.

During the course, bootable filesystem images will be produced. Remote courses are delivered using the QEMU emulator, while in the classroom it is possible to use either QEMU or real embedded boards of the trainer's choice.

Other projects with similar goals include the Yocto project and OpenWRT. Please use these presentations to determine which one is the right choice for your needs.

Read more...

Embedded Linux Systems Architecture

 35 Hours

Course Objectives

To provide an understanding of the essentials of embedded GNU/Linux, how the bits and pieces fit together. What components are needed to build an embedded GNU/Linux system, where to get them from and how to configure/build/install them? Where to get help from? What about those software licenses? Hands-on exercises provide you with the necessary practical experience to go ahead and develop your own embedded GNU/Linux systems after completing this training successfully.

Description

This five day training class uses hands-on exercises combined with instruction to illustrate the concepts of embedded GNU/Linux. It is designed to bring you quickly up to speed. The philosophy, concepts and commands necessary to make effective use of GNU/Linux are described through a combination of theory and on-the-job training.

Don't reinvent the wheel, but learn from an experienced trainer and take home a working knowledge of GNU/Linux and the ability to use it effectively in your own embedded development project.

Who should attend?

Managers, project managers, software-, hardware-, development-, systems engineers, testers, administrators, technicians and other parties interested in the technology, who want to understand as quickly as possible how Embedded GNU/Linux works. You must use GNU/Linux or you have to luxury to decide whether it makes sense to use it or not. Maybe you already tried to use Embedded GNU/Linux, but are not quite sure that you did everything the right way. You currently use a different operating system and wand to figure out whether GNU/Linux might better and/or cheaper.

Delivery Options

All the training material is English, but the presentation of it can be in English or in German, as you wish, worldwide.

  • on-site - instructor driven
  • on-line - instructor driven
  • on-site/on-line combination - instructor driven
Read more...

Embedded Linux Kernel and Driver Development

14 Hours

A two day course consisting of around 60% hands-on labs focusing on Embedded Linux kernel internals, architecture, development and investigating how to write and integrate several types of device drivers.

Who should attend?

Engineers interested in Linux kernel development on Embedded systems and plateforms.

Read more...

Introduction to Embedded Linux (Hands-on training)

 14 Hours

This is a two day course covering all basic principles of building Embedded linux Systems, around 60% of the entire course time is practical hands-on implementation for real world application using the same standards and tools used in industry

Read more...

Embedded Linux: Building a System from the Ground Up

 14 Hours

In this instructor-led, live training in New Jersey participants will learn step-by-step how to build an embedded Linux system from the ground up. From building a minimalistic kernel to configuring the bootup and initialization processes, participants will learn the tools, techniques and mindset needed to deploy a fully functional embedded Linux system.

For remote trainings, QEMU will be used to emulate the hardware. Other platforms, including real hardware devices, can be considered on a case by case basis.

Read more...

Embedded GNU/Linux Kernel Internals and Device Drivers

 35 Hours

Description

This 5-day training class uses hands-on exercises combined with instruction to illustrate the concepts of GNU/Linux kernel internals and device driver development. It is designed to bring you quickly up to speed. We describe processes, concepts and commands necessary to write GNU/Linux device drivers through a combination of theory and on-the-job training.

Don't reinvent the wheel, but learn from an experienced trainer and take home a working knowledge and the ability to use it effectively in your own embedded development project.

Who should attend?

People with interest in or tasked with the development or evaluation of developing GNU/Linux device drivers like software engineers, field engineers, (project) managers, hardware engineers.

Read more...

LEDE: Set Up a Linux Wireless Router

 7 Hours

The LEDE Project (Linux Embedded Development Environment) is a Linux operating system based on OpenWrt. It is a complete replacement for the vendor-supplied firmware of a wide range of wireless routers and non-network devices.

In this instructor-led, live training, participants will learn how to set up a LEDE based wireless router.

Audience

  • Network administrators and technicians

Format of the course

  • Part lecture, part discussion, exercises and heavy hands-on practice
Read more...

NetApp ONTAP

 35 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at engineers who wish to implement NetApp ONTAP.

By the end of this training, participants will be able to:

  • Set up and administer ONTAP 9.3 Cluster (3 days).
  • Safeguard data through Data Protection technologies (2 days).
Read more...

Yocto Project

 28 Hours

In this instructor-led, live training in New Jersey, participants will learn how to create a build system for embedded Linux based on Yocto Project.

By the end of this training, participants will be able to:

  • Understand the fundamental concepts behind a Yocto Project build system, including recipes, metadata, and layers.
  • Build a Linux image and run it under emulation.
  • Save time and energy building embedded Linux systems.
Read more...

Last Updated:

Testimonials (4)

The trainer's presentation and way of communicating.

Gianpiero Arico - Urmet Spa

Course - Embedded Linux Systems Architecture

I understood the process of the operating system and how do we link all factors together information of network as well so now I have an obvious and full picture about what is going on these computers how they communicate with each others ultimately gained knowledge about the most important operating system which is Linux and how do we implement our own embedded Linux

Rawda Alnaqbi - beamtrail

Course - Introduction to Embedded Linux (Hands-on training)

The knowledge of the trainer. He was able to answer all of my questions, even questions about our platform. He also continued to help until we all understood the material.

James O'Donnell - Tennant Company

Course - Embedded Linux Kernel and Driver Development

Practical excersises

Marcin Janicki - Hectronic Polska Sp. z o.o.

Course - Yocto Project

Upcoming Courses

Embedded GNU/Linux Kernel Internals and Device Drivers

2026-04-20 9:30 am
35 hours
Princeton, NJ – Regus at Overlook Business Center
$ 6757 (Online)
$ 9757 (Classroom)

NetApp ONTAP

2026-05-04 9:30 am
35 hours
Totowa, NJ – Regus at Riverview Drive
$ 6757 (Online)
$ 9757 (Classroom)

Buildroot: a Firmware Generator for Embedded Systems

2026-05-18 9:30 am
7 hours
Princeton, NJ – Regus at Overlook Business Center
$ 1838 (Online)
$ 2438 (Classroom)

NetApp ONTAP

2026-06-01 9:30 am
35 hours
Totowa, NJ – Regus at Riverview Drive
$ 6757 (Online)
$ 9757 (Classroom)

Buildroot: a Firmware Generator for Embedded Systems

2026-06-15 9:30 am
7 hours
Princeton, NJ – Regus at Overlook Business Center
$ 1838 (Online)
$ 2438 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

Embedded Linux Consulting
Online Embedded Linux training in New Jersey, Embedded Linux training courses in New Jersey, Weekend Embedded Linux courses in New Jersey, Evening Embedded Linux training in New Jersey, Embedded Linux instructor-led in New Jersey, Online Embedded Linux training in New Jersey, Weekend Embedded Linux training in New Jersey, Embedded Linux instructor in New Jersey, Embedded Linux one on one training in New Jersey, Embedded Linux classes in New Jersey, Embedded Linux private courses in New Jersey, Embedded Linux boot camp in New Jersey, Evening Embedded Linux courses in New Jersey, Embedded Linux instructor-led in New Jersey, Embedded Linux trainer in New Jersey, Embedded Linux coaching in New Jersey, Embedded Linux on-site in New Jersey