Embedded Linux Training in Vermont

Online or onsite, instructor-led live Embedded Linux training courses demonstrate through interactive discussion and hands-on practice the fundamentals of Embedded Linux.

Embedded Linux training is available as "online live training" or "onsite live training". Online live training (aka "remote live training") is carried out by way of an interactive, remote desktop. Onsite live Embedded Linux training can be carried out locally on customer premises in Vermont or in NobleProg corporate training centers in Vermont.

NobleProg -- Your Local Training Provider

NobleProg Training Place, City Burlington, VT – Regus at Williston

300 Interstate Corporate Center, Suite 200, Burlington, United States, 05495

The venue is located in suburban Williston’s Interstate Corporate Center, accessible by car via US 2 or I‑89 with free on-site parking available. From Burlington International Airport (BTV), only about 5 miles away, taxis or rideshares take approximately 10 minutes via Williston Road. Public transit is served by Green Mountain Transit Route 2A, with a stop right outside the corporate center, offering convenient access for attendees traveling without a car.

NobleProg Training Place, City Montpelier, VT – Local 64

43 State Street, 2ndFloor, Montpelier, United States, 05602

The venue is located at 43 State Street, on the second floor west side, right in downtown Montpelier near the Vermont State House. Easily reached by car via I‑89 or US 2, there is nearby metered street parking and municipal lots. From Burlington International Airport (BTV), about 36 miles northwest, taxis or rideshares typically take around 45 minutes south via I‑89. Public transit is available via Green Mountain Transit buses stopping on State or Main Street, placing the center within a short walk for those arriving without a car.

NobleProg Training Place, City Winooski, VT – MyCube at Champlain Mill

20 Winooski Falls Wy, Suite 302, Winooski, United States, 05404

The venue is located in the historic Champlain Mill on Winooski Falls Way, perched above scenic Winooski Falls, easily accessed by car via I‑89 or US 2, with free on-site parking available. From Burlington International Airport (BTV), around 3 miles east, taxis or rideshares take about 10–15 minutes via Williston Road. Public transit is facilitated by Green Mountain Transit routes 2 and 4, which stop nearby on Riverside Avenue and Church Street—only a short walk to the site.

Subcategories (1)

Explore Our Courses

Introduction to Embedded Linux (Hands-on training)

14 Hours

NetApp ONTAP

35 Hours

OpenBMC Fundamentals: Building and Customizing BMC Firmware

14 Hours

OpenBMC IPMI, Hardware Monitoring, and Sensor Management

14 Hours

OpenBMC Security: Secure Boot, Certificates, and Firmware Updates

14 Hours

OpenBMC Yocto Development: BitBake, Layers, and Build Systems

14 Hours

Yocto Project

28 Hours

Last Updated: 2026-06-26

Testimonials (2)

I understood the process of the operating system and how do we link all factors together information of network as well so now I have an obvious and full picture about what is going on these computers how they communicate with each others ultimately gained knowledge about the most important operating system which is Linux and how do we implement our own embedded Linux

Rawda Alnaqbi - beamtrail

Course - Introduction to Embedded Linux (Hands-on training)

Practical excersises

Marcin Janicki - Hectronic Polska Sp. z o.o.

Course - Yocto Project