Birmingham, AL – Regus at Shipt Tower (Downtown)

420 20th St S, Suite 2200, Birmingham, United States, 35203

The venue is located in downtown Birmingham within the prominent Shipt Tower at 420 North 20th Street, easily reached by car via I‑59, I‑20, or I‑65, with nearby public parking garages. From Birmingham–Shuttlesworth International Airport (BHM), a taxi or rideshare typically takes 10–15 minutes via I‑20 West and US‑31 North. Public transit users can take MAX bus routes stopping on 20th Street or near 4th Avenue North, placing the centre within a few minutes’ walk—offering good access for attendees without cars.

Birmingham, AL – Regus at Chase Corporate Center

1 Chase Corporate Drive, Suite 400, Birmingham, United States, 35244

The venue sits in the Chase Corporate Center just off Highway 31 near I‑459 and Highway 280, within a serene, landscaped corporate campus. Visitors arriving by car benefit from plentiful free parking on-site and adjoining garages. From Birmingham–Shuttlesworth International Airport (BHM), taxis or rideshares take around 15–20 minutes via I‑459 North and Highway 280. Public transit riders can use MAX bus routes stopping close to the corporate park, though most attendees prefer driving or rideshare. The tranquil campus setting offers easy access to nearby gyms, retail, and restaurants for break or post-session gatherings.
NobleProg Training Place, City Birmingham, AL - Regus at One Perimeter Park

Birmingham, AL - Regus at One Perimeter Park

1 Perimeter Park South, Birmingham, United States, 35243

The venue is located in the Perimeter Park business complex off I‑459 near Highway 280, offering easy access by car with ample on-site parking. Visitors arriving by air from Birmingham‑Shuttlesworth International Airport (BHM), about 15 miles away, can expect a traditional taxi or rideshare ride of approximately 20–25 minutes via I‑459 South and Highway 280. Public transit options include nearby Jefferson County Transit buses that run along Valleydale Road, with stops within a few blocks of Perimeter Park, making it reasonably accessible without a car.

Huntsville, AL – Regus at Cummings Research Park

7027 Old Madison Pike NW, Suite 108, Huntsville, United States, 35806

The venue is located in Cummings Research Park, a premier business and technology hub with easy access by car via I‑565 or U.S. Highway 72, and plenty of on-site parking available. From Huntsville International Airport (HSV), approximately 10 miles southeast, taxis or rideshares take around 15–20 minutes heading northwest on U.S. 72. Those relying on public transit can take Rocket City Transit route 22, which stops near the park entrance, offering a convenient option for attendees without a car.
NobleProg Training Place, City Montgomery, AL - Regus at RSA Dexter Avenue

Montgomery, AL - Regus at RSA Dexter Avenue

445 Dexter Avenue, Suite 4050, Montgomery, United States,  36104

The venue is located in the heart of downtown Montgomery on Dexter Avenue, easily accessible by car via I‑65 and US‑80; nearby surface and garage parking are available in the RSA building complex. From Montgomery Regional Airport (MGM), about 9 miles southeast of downtown, a taxi or rideshare typically takes 15–20 minutes via I‑65 North and I‑85 North. Public transit is available via the Montgomery Transit System (MTS) with bus routes running along Court Street and Commerce Street, both within a few blocks’ walk of the venue.

Subcategories (3)

Category for P4

P4
Category for ONOS (Open Network Operating System)

ONOS (Open Network Operating System)
Category for OpenDaylight

OpenDaylight

Explore Our Courses

OpenDaylight in Production: Scaling and Optimizing SDN Deployments

 14 Hours

This instructor-led, live training in Alabama (online or onsite) is aimed at intermediate-level IT architects, network administrators, and engineers who wish to deploy OpenDaylight in production environments, optimize its performance for large-scale use, and troubleshoot common issues in SDN deployments.

By the end of this training, participants will be able to:

  • Deploy OpenDaylight in production environments for scalable SDN solutions.
  • Optimize the performance of OpenDaylight deployments to handle high traffic volumes.
  • Troubleshoot and resolve common issues in SDN deployments.
  • Monitor and maintain OpenDaylight environments for long-term stability.
  • Scale OpenDaylight deployments to meet growing network demands.
Read more...

Developing Applications with OpenDaylight

 14 Hours

This instructor-led, live training in Alabama (online or onsite) is aimed at intermediate-level SDN developers and software engineers who wish to learn how to build custom SDN applications using OpenDaylight APIs and YANG models to enhance network functionality and scalability.

By the end of this training, participants will be able to:

  • Understand the architecture and components of OpenDaylight.
  • Use OpenDaylight APIs to build SDN applications.
  • Create and manage YANG models for network customization.
  • Deploy, test, and debug custom applications in an OpenDaylight environment.
  • Integrate OpenDaylight with external systems and network devices.
Read more...

ONOS in Production: Deployment and Optimization

 21 Hours

This instructor-led, live training in Alabama (online or onsite) is aimed at intermediate-level IT architects and network managers who wish to deploy and optimize ONOS in production environments, ensuring scalability, performance, and reliability.

By the end of this training, participants will be able to:

  • Understand the architecture and core features of ONOS for production use.
  • Deploy ONOS in a production environment using best practices.
  • Configure clustering, redundancy, and fault tolerance in ONOS.
  • Monitor, troubleshoot, and optimize ONOS deployments for scalability and performance.
  • Integrate ONOS with existing network infrastructure and tools.
  • Plan and execute a successful ONOS upgrade process.
Read more...

Developing Applications for ONOS

 21 Hours

This instructor-led, live training in Alabama (online or onsite) is aimed at intermediate-level SDN developers and network engineers who wish to develop custom applications on the ONOS platform to address specific network challenges and enhance SDN capabilities.

By the end of this training, participants will be able to:

  • Understand the architecture and core components of ONOS.
  • Set up a development environment for ONOS applications.
  • Create, test, and deploy ONOS applications for managing SDN networks.
  • Integrate ONOS applications with external systems and APIs.
  • Troubleshoot and optimize ONOS applications for performance and scalability.
Read more...

OpenDaylight for Network Engineers

 14 Hours

This instructor-led, live training in Alabama (online or onsite) is aimed at intermediate-level network engineers and DevOps teams who wish to deploy, configure, and manage SDN solutions using the OpenDaylight platform.

By the end of this training, participants will be able to:

  • Understand OpenDaylight's architecture, components, and role in SDN ecosystems.
  • Install and configure OpenDaylight for various network scenarios.
  • Develop and deploy network flows using OpenDaylight controllers.
  • Integrate OpenDaylight with SDN-enabled devices and existing networks.
  • Troubleshoot and optimize OpenDaylight deployments for real-world use cases.
Read more...

ONOS for Network Engineers: Managing SDN Environments

 21 Hours

This instructor-led, live training in Alabama (online or onsite) is aimed at intermediate-level network engineers, DevOps teams, and SDN developers who wish to understand and manage SDN environments using ONOS effectively.

By the end of this training, participants will be able to:

  • Understand the architecture and components of ONOS.
  • Install and configure ONOS in a lab environment.
  • Explore the capabilities of ONOS for managing SDN environments.
  • Deploy, manage, and troubleshoot SDN networks using ONOS.
Read more...

OpenDaylight for Network Automation

 14 Hours

This instructor-led, live training in Alabama (online or onsite) is aimed at beginner-level network engineers and IT administrators who wish to learn fundamental OpenDaylight concepts, understand its role in network automation, and begin automating network configurations and operations.

By the end of this training, participants will be able to:

  • Understand the role of OpenDaylight in software-defined networking (SDN).
  • Install and configure OpenDaylight on a Linux-based system.
  • Explore the OpenDaylight architecture and core features.
  • Create basic automated network configurations using OpenDaylight.
  • Monitor and manage networks using OpenDaylight controllers.
Read more...

ONOS Fundamentals: Deploying Scalable SDN Solutions

 14 Hours

This instructor-led, live training in Alabama (online or onsite) is aimed at beginner-level networking professionals and IT administrators who wish to understand the foundational concepts of ONOS, its architecture, and its deployment for scalable SDN solutions.

By the end of this training, participants will be able to:

  • Understand the role of ONOS in software-defined networking (SDN).
  • Describe the architecture and core components of ONOS.
  • Install and configure ONOS on a Linux-based system.
  • Set up a basic SDN network using ONOS.
  • Explore ONOS features for managing and scaling network infrastructure.
Read more...

Introduction to OpenDaylight: Understanding SDN Fundamentals

 14 Hours

This instructor-led, live training in Alabama (online or onsite) is aimed at beginner-level network engineers and IT professionals who wish to gain a foundational understanding of SDN concepts, learn about the architecture of OpenDaylight, and perform basic installation and configuration tasks.

By the end of this training, participants will be able to:

  • Understand the principles and benefits of software-defined networking (SDN).
  • Explore the architecture and components of OpenDaylight.
  • Install and configure OpenDaylight on a Linux system.
  • Integrate OpenDaylight with networking devices.
  • Execute basic OpenDaylight operations and commands.
Read more...

OpenStack Architecture and Troubleshooting

 14 Hours

The aim of this course is twofold - gain solid knowledge about OpenStack architecture and acquire profound troubleshooting skills. In the architecture part you will learn how to design the hardware for the public and private cloud, prepare high-availability control plane, choose proper size of the flavours, and safely overcommit cloud resources, among other things. Getting knowledge about the internals of Neutron (Networking Service) is another essential part in OpenStack architecture. Next the participant will be introduced into methods of troubleshooting issues in OpenStack clusters starting from general tips, through network troubleshooting up to caveats of main OpenStack services. Around 75% of the course comprises of hands-on workshops in the real OpenStack training environment.

Read more...

OpenStack Bootcamp

 28 Hours

The course is a comprehensive training on OpenStack. It starts with the introduction to the system, then through hands-on workshops it gives practical knowledge on managing private clouds based on OpenStack, finally troubleshooting and advanced, architectural topics are present. The goal of this course is to familiarize with the OpenStack ecosystem as well as to give a strong background for further expansion and refinement of the OpenStack clouds. The course comprises all topics necessary to accomplish the Certificate OpenStack Administrator exam. 75% of the course is based on hands-on workshop in the real OpenStack training environment.

Read more...

OpenStack Bootcamp Extended

 35 Hours

The course is a comprehensive training on OpenStack, extended version of the OpenStack Bootcamp course includes extra excercises, troubleshooting and sample examination tasks. Extended content is highlited in bold in the course outline. It starts with the introduction to the system, then through hands-on workshops it gives practical knowledge on managing private clouds based on OpenStack, finally troubleshooting and advanced, architectural topics are present. The goal of this course is to familiarize with the OpenStack ecosystem as well as to give a strong background for further expansion and refinement of the OpenStack clouds. The course comprises all topics necessary to accomplish the Certificate OpenStack Administrator exam. 75% of the course is based on hands-on workshop in the real OpenStack training environment. After the course participants get all the materials and training environment for self-study and feature/troubleshooting excercises.

Customization options

The full course is to be meant for at least 5 days. It could be shortened if some of the topics are not relevant for the customer. In case the participants are beginners to OpenStack (slower pace) it is recommended to expand the course for 6 days or remove some advanced topics. The course can be also extended with 1 more day when OVN topics can be presented.

Read more...

OpenStack and NFV (with OVN and OpenFlow)

 21 Hours

The course is a profound training on OpenStack networking. It starts with the introduction to OpenStack and its architecture, then clarifies core OpenStack projects as Identity service (Keystone), Image service (Glance), Compute service (Nova), Block storage (Cinder) in order to describe the surroundings of the networks in OpenStack and mainly focus on Networking project (Neutron). Virtual network infrastructure is described and based on the Open Virtual Network project, Open vSwitch and OpenFlow. The goal of the course is to understand basic operations and architecture of OpenStack as well as to familiarize participants with various networking technologies behind OpenStack, extending information about OVN and underlying flows, resources and tools.

Customization options

The training can be contracted to 2 days, focusing on core aspects relevant for the customer. The training can be also extended regarding administrative, design, networking and/or troubleshooting topics concerning OpenStack deployments. It is possible to describe other underlying SDN solutions like Linux Bridge or OvS.

Read more...

Linux for Network Engineers

 14 Hours

This instructor-led, live training in Alabama (online or onsite) is aimed at network engineers who wish to use Linux for network engineering.

By the end of this training, participants will be able to:

  • Set up Linux services for networking.
  • Replace switches with Linux switches.
  • Use Linux commands to manage processes.
  • Configure an SDN to automate network maintenance.
Read more...

ONAP for Network Orchestration and Automation

 28 Hours

In this instructor-led, live training in Alabama (online or onsite), participants will learn how to use ONAP to automate networking services.

By the end of this training, participants will be able to:

  • Understand, install and configure the various components in the ONAP ecosystem.
  • Carry out real-time, policy-driven orchestration and automation of physical and virtual network functions.
  • Design, create, orchestrate, and monitor VNFs, SDNs and other network services.
  • Efficiently manage the entire networking lifecycle using a software-driven approach.
  • Develop, deploy, and scale a network using the latest open source technologies and practices.
Read more...

P4 Programming

 21 Hours

This instructor-led, live training in Alabama (online or onsite) is aimed at networking engineers and developers who wish to configure, execute and manage programmable networking resources using P4.

By the end of this training, participants will be able to:

  • Learn the fundamentals of the P4 language.
  • Program network devices.
  • Set up a server for traffic management.
  • Compile and execute a P4 program to control plane applications.
  • Manage network congestion using monitoring and debugging methods.
Read more...

Software-Defined Networking

 28 Hours

This instructor-led, live training in Alabama (online or onsite) is aimed at system administrators, network engineers, and developers who wish to install, configure, and manage controllers, applications, and networking devices under an SDN.

By the end of this training, participants will be able to:

  • Set up a virtual network.
  • Create applications.
  • Use controllers to operate a software-defined network.
Read more...

OpenStack Security

 14 Hours

The course is providing practical knowledge on OpenStack and private cloud security. It starts from the introduction to the system, then the participants are getting practical knowledge on security in private clouds and securing OpenStack installation. During the course, each of the core OpenStack modules is presented, participants are building up virtual identity, image, network, compute and storage resources while discussing relevant security topics. Each participant is getting their own training environment with a complete OpenStack installation based on selected cloud architecture (eg. storage, networking). The training could be highly customized based on the needs of the client.

Customization options
The training can be contracted to 2 days, focusing on core aspects relevant for the customer. The training can be also extended regarding administrative, design, networking and/or troubleshooting topics concerning OpenStack deployments
 

Read more...

Last Updated:

Testimonials (3)

The trainer was extremely knowledgable and helpful. While walking through the exercises, I wasn't rushed and was allowed to make mistakes (to a point) and then help was given to correct to them where needed.

Tim Wilkes - Gamma

Course - OpenStack Security

communication, knowledge from experience, solve problems,

Marcin Walewski - Intel Technology Poland Sp. z o.o.

Course - OpenStack Bootcamp

To get a better understanding about OpenStack.

Jan Gustafsson - Polystar OSIX

Course - OpenStack Architecture and Troubleshooting

Upcoming Courses

OpenStack and NFV (with OVN and OpenFlow)

2025-08-25 9:30 am
21 hours
Huntsville, AL – Regus at Cummings Research Park
$ 4054 (Online)
$ 4054 (Classroom)

Introduction to OpenDaylight: Understanding SDN Fundamentals

2025-09-08 9:30 am
14 hours
Huntsville, AL – Regus at Cummings Research Park
$ 2703 (Online)
$ 2703 (Classroom)

ONOS in Production: Deployment and Optimization

2025-09-22 9:30 am
21 hours
Huntsville, AL – Regus at Cummings Research Park
$ 4054 (Online)
$ 4054 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

Software-Defined Networking (SDN) Consulting
Online SDN (Software-Defined Networking) training in Alabama, SDN (Software-Defined Networking) training courses in Alabama, Weekend SDN courses in Alabama, Evening SDN (Software-Defined Networking) training in Alabama, Software-Defined Networking (SDN) instructor-led in Alabama, Software-Defined Networking (SDN) one on one training in Alabama, Software-Defined Networking private courses in Alabama, SDN instructor-led in Alabama, Software-Defined Networking (SDN) instructor in Alabama, Online SDN (Software-Defined Networking) training in Alabama, SDN classes in Alabama, Weekend SDN (Software-Defined Networking) training in Alabama, Evening SDN courses in Alabama, SDN (Software-Defined Networking) on-site in Alabama, Software-Defined Networking trainer in Alabama, Software-Defined Networking (SDN) coaching in Alabama, Software-Defined Networking boot camp in Alabama