Get in Touch

Houston, TX - Regus – Downtown at Pennzoil Place

700 Milam Street, Suite 1300, Houston, United States, 77002

The venue is centrally located near major highways, including I‑45, I‑69, and US‑59, with convenient parking available in the building’s garage as well as nearby garages. For those arriving by air, both George Bush Intercontinental Airport (IAH) and William P. Hobby Airport (HOU) are just 7 to 10 miles away. Public transit is easily accessible via METRO bus routes, and the venue also offers tunnel access to downtown amenities.

Dallas, TX - Regus - Downtown Republic Center

325 N. St. Paul Street, Dallas, United States, 75201

The venue is conveniently located in downtown Dallas and easily accessible by car via I‑35E, US‑75, and I‑30, with several parking garages and surface lots nearby. Public transit access is excellent, just steps from St. Paul Station on the DART Blue and Red lines and connected to the downtown tunnel network. For those arriving by air, Dallas Love Field is approximately 7 miles away, while DFW International Airport is about 20 miles from the venue. Valet service is available at the building, along with multiple nearby parking options.

Austin, TX - Regus - Lamar Central

3800 N Lamar Blvd, Suite 200, Austin, United States, 78756

Easily reachable by car via Mopac (Loop 1) and US‑183. Plenty of nearby public parking is available. For air travelers, Austin-Bergstrom International Airport (AUS) is approximately 10 miles away. Local transit access is provided via bus routes serving Lamar Blvd.

Austin, TX – Regus at Dobie Center

2021 Guadalupe Street, Suite 260, Austin, United States, 78705

The venue is located in the vibrant West Campus neighborhood near the University of Texas at the Dobie Center, easily reachable by car via I‑35 or I‑35 Frontage Road and Loop 1, with on-site and street parking nearby. From Austin–Bergstrom International Airport (AUS), about 11 miles southeast, a taxi or rideshare takes around 20–25 minutes via TX‑71 West and I‑35 North. Public transit users can take Capital Metro routes to the University of Texas/Dobie Mall stop directly in front of the building, placing it within a short walk for attendees without cars.

Lubbock, TX

1610 Broadway, Lubbock, United States, 79401

The venue is conveniently located just off I‑27, offering easy access by car with on-site self-parking and nearby garages. For those arriving by air, Fort Smith Regional Airport is approximately 6 miles away, providing quick and convenient access. Public transit is also available, with downtown bus routes serving the area and the venue within walking distance of central Lubbock locations.
NobleProg Training Place, City Dallas, TX - Uptown

Dallas, TX - Uptown

3232 McKinney Ave, Dallas, United States, 75204

The venue is located at 3232 McKinney Avenue in the heart of Uptown Dallas, a walkable and transit-oriented district just north of Downtown. It’s easily accessible by car via US‑75 (Central Expressway), Spur 366 (Woodall Rodgers), or I‑345 with adjacent parking garages and street parking. From Dallas/Fort Worth International Airport (DFW), taxis or rideshares take about 25–30 minutes via TX‑121 South and US‑75 South. From Dallas Love Field (DAL), it's a quick 15‑minute ride via Harry Hines Blvd and Herb Kelleher Way. Public transit options include the McKinney Ave Trolley stop directly outside and DART Light Rail nearby—making it convenient even without a vehicle.

Houston, TX – Regus at Capital One Building

5444 Westheimer Rd Uptown, Suite 1000, Houston, United States, 77056

The venue is located in the Capital One Building off Westheimer Road in the Galleria/Uptown area, easily accessed by car via I‑610, US‑59, or Westheimer, with ample attached covered parking and visitor spaces on-site. From Houston’s George Bush Intercontinental Airport (IAH), a taxi or rideshare takes approximately 25–30 minutes via I‑69 South and I‑610 West. From William P. Hobby Airport (HOU), the ride takes about 35 minutes via I‑45 North and I‑610 West. Public transit is served by Metro bus routes along Westheimer Drive with stops close to the building, enabling easy access for attendees without cars.

Austin, TX - Regus - Littlefield Congress

106 E 6th St, Austin, United States, 78701

The venue is conveniently situated near I‑35 and US‑183, making it easily accessible by car, with both public and garage parking options—such as the Littlefield Garage at 508 Brazos—located within walking distance. For those using public transportation, the venue is just a short walk from the Downtown Station (CapMetro) and is served by several bus routes. Travelers arriving by air will find that Austin-Bergstrom International Airport is approximately 8 miles away, providing straightforward access to and from the venue.

San Antonio, TX - Regus - One Riverwalk Place

700 North Saint Mary's Street, One Riverwalk Place, Ste 1400, San Antonio, United States, 78205

The venue is easily accessible by car via major highways including I‑35, I‑37, and I‑10, with the convenience of an on-site parking garage and nearby public lots. For those traveling by air, San Antonio International Airport (SAT) is located approximately 8 miles away. Public transit options are also readily available, with several bus lines nearby and the downtown VIA Transit hub just a short walk from the building.

San Antonio, TX – Venture X at River Walk

500 Navarro St, San Antonio, United States, 78205

The venue sits on the second floor of a historic building at 500 Navarro Street, steps from the iconic River Walk. It’s easily reached by car via I‑10, I‑35, or US‑281, with public parking available in a ten-story garage across the street and additional on‑street spots. From San Antonio International Airport (SAT), a taxi or rideshare takes about 13 minutes via I‑410 Inner Loop and I‑35 North. Public transit options include VIA bus routes and the River Walk shuttle with stops near Navarro, making the location highly accessible for attendees without cars.

Subcategories (3)

SketchUp

SketchUp
CATIA

CATIA
SolidWorks

SolidWorks

Explore Our Courses

Mastering ArchiCAD — Advanced Modeling, Collaboration, and BIM Workflows

 35 Hours

ArchiCAD is a professional Building Information Modeling (BIM) software developed by Graphisoft, widely used for architectural design, documentation, and collaboration.

This instructor-led, live training (online or onsite) is aimed at intermediate-level to advanced-level architecture and BIM professionals who wish to master complex modeling techniques, automate workflows, and enhance collaboration using ArchiCAD’s advanced features.

By the end of this training, participants will be able to:

  • Use ArchiCAD’s advanced modeling and documentation tools efficiently.
  • Customize templates, attributes, and standards for large-scale projects.
  • Leverage teamwork, BIMcloud, and IFC workflows for multi-user collaboration.
  • Integrate automation, visualization, and performance optimization tools in ArchiCAD.

Format of the Course

  • Interactive lecture and discussion.
  • Lots of exercises and practice.
  • Hands-on implementation in a live-lab environment.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
Read more...

AutoCAD Plant 3D: Advanced Design & Interference Management

 14 Hours

AutoCAD Plant 3D is a specialized CAD application for designing process plant facilities, providing tools for piping, equipment, and structural modelling as well as isometric and orthographic deliverables.

This instructor-led, live training (online or onsite) is aimed at intermediate-level to advanced-level CAD professionals who wish to create customized libraries and templates, integrate mechanical and structural elements, and implement advanced interference checking and conflict resolution workflows.

By the end of this training, participants will be able to:

  • Create and maintain customized templates for parts, equipment, and repetitive activities.
  • Modify and extend component libraries to meet project standards and workflows.
  • Produce isometric and orthogonal drawings and optimize templates for repetitive tasks.
  • Perform advanced interference checking and document conflicts and resolutions.

Format of the Course

  • Interactive lecture and demonstration.
  • Hands-on exercises in a lab environment using real project files.
  • Practical workshops focused on templates, library editing, and clash management.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
Read more...

Mastering ArchiCAD

 35 Hours

This instructor-led, live training in Texas (online or onsite) is aimed at intermediate-level architects who wish to use ArchiCAD for architectural design, building information modeling (BIM), and advanced construction documentation.

By the end of this training, participants will be able to:

  • Learn to create, modify, and manage both 2D and 3D views within projects.
  • Understand and manipulate objects, components, and libraries in ArchiCAD.
  • Create detailed building sections, elevations, and component details.
  • Analyze and optimize building energy performance using ArchiCAD’s energy analysis tools.
  • Develop photorealistic renderings and animations for presentations.
  • Automate building processes and run performance simulations.
Read more...

SolidWorks: Intermediate to Advanced

 21 Hours

This instructor-led, live training in Texas (online or onsite) is aimed at intermediate-level to advanced-level SolidWorks users who wish to deepen their modeling skills, master advanced features, and improve design efficiency and accuracy.

By the end of this training, participants will be able to:

  • Create complex parts, assemblies, and configurations efficiently.
  • Use advanced modeling tools such as sweeps, lofts, and surfaces.
  • Apply design tables, equations, and parametric controls.
  • Perform simulations and motion studies to validate designs.
Read more...

AutoCAD Electrical

 21 Hours

This instructor-led, live training in Texas (online or onsite) is aimed at beginner-level electrical engineers and designers who wish to use AutoCAD to create professional electrical drawings and documentation.

By the end of this training, participants will be able to:

  • Understand the basics of electrical design and drafting using AutoCAD Electrical.
  • Learn to create and manage electrical schematics, panel layouts, and wiring diagrams.
  • Utilize AutoCAD Electrical's advanced tools and features to enhance productivity.
  • Apply best practices for electrical design and documentation.
Read more...

Introduction to Solidworks PDM

 35 Hours

This instructor-led, live training in Texas (online or onsite) is aimed at beginner-level users who wish to explore the core functionalities of Solidworks PDM and its applicability to their organization's design file management requirements.

By the end of this training, participants will be able to:

  • Understand the key features and benefits of Solidworks PDM.
  • Navigate the Solidworks PDM interface and workflows.
  • Perform basic end-user tasks such as file check-in/check-out, versioning, and searching.
  • Explore administrative functionalities, including vault configuration, user permissions, and workflow customization.
  • Assess the potential implementation of Solidworks PDM across multiple company sites.
Read more...

Solidworks for Industrial Automation

 35 Hours

This instructor-led, live training in Texas (online or onsite) is aimed at intermediate-level mechanical engineers and CAD designers who wish to use SolidWorks to design and implement industrial automation systems.

By the end of this training, participants will be able to:

  • Install and configure SolidWorks for automation design.
  • Design, simulate, and analyze industrial automation components and systems.
  • Export designs for real-world implementation in industrial settings.
Read more...

Advanced AutoCAD Plant 3D

 21 Hours

This instructor-led, live training in Texas (online or onsite) is aimed at advanced-level AutoCAD Plant 3D users who wish to use AutoCAD Plant 3D for complex plant design projects effectively.

By the end of this training, participants will be able to:

  • Use AutoCAD Plant 3D for complex and detailed plant design projects.
  • Understand the advanced features of AutoCAD Plant 3D, including custom component creation, advanced data management, and complex routing.
  • Manage large-scale projects and collaborate effectively with teams using different software tools.
  • Customize the software and automate repetitive tasks to meet specific project needs.
Read more...

AutoCAD Plant 3D

 14 Hours

This instructor-led, live training in Texas (online or onsite) is aimed at beginner-level to intermediate-level professionals in plant design and engineering who wish to gain and enhance their skills in using AutoCAD Plant 3D.

By the end of this training, participants will be able to:

  • Set up a development environment that includes AutoCAD Plant 3D.
  • Create detailed 3D plant models and layouts.
  • Generate accurate isometric and orthographic drawings.
  • Effectively document and collaborate on plant designs.
  • Debug common issues in AutoCAD Plant 3D.
Read more...

Advanced SolidWorks - 5 Days

 35 Hours

This instructor-led, live training in Texas (online or onsite) is aimed at intermediate-level to advanced-level mechatronics, mechanical, electrical, and electronics engineers who wish to further enhance their SolidWorks knowledge by mastering advanced part modeling, as well as other advanced features and shaping capabilities of SolidWorks.

By the end of this training, participants will be able to:

  • Use multi-body solids, sweeping and lofting features, and more advanced SolidWorks features.
  • Utilize the assembly modeling capabilities of SolidWorks.
  • Master the advanced modeling features of SolidWorks.
Read more...

Introduction to Autodesk 3ds Max

 14 Hours

This instructor-led, live training in Texas (online or onsite) is aimed at beginner-level graphic designers and artists who wish to learn the basics of 3ds Max and how to create 3D models, animations, and renderings for various purposes.

By the end of this training, participants will be able to:

  • Set up a development environment that includes 3ds Max software, a computer that meets the system requirements, and Visual Studio Code.
  • Create a basic 3ds Max project and explore the user interface and navigation tools.
  • Use 3ds Max tools and modifiers to create and edit 3D objects, such as primitives, shapes, meshes, and splines.
  • Use 3ds Max materials and maps to apply colors, textures, and effects to 3D objects.
  • Use 3ds Max lights and cameras to set up the scene and adjust the lighting and perspective.
  • Use 3ds Max animation tools and controllers to animate 3D objects and create keyframes, curves, and trajectories.
  • Use 3ds Max rendering tools and settings to render the scene and export the final image or video.
Read more...

CATIA V5 Fundamentals - 3 Days

 21 Hours

This instructor-led, live training in Texas (online or onsite) is aimed at beginner-level to intermediate-level web designers who wish to learn how to use CATIA V5 for collaborative product creation and product data management.

By the end of this training, participants will be able to:

  • Understand the CATIA V5 interface and navigation.
  • Create 2D sketches and transform them into 3D models.
  • Develop assemblies to combine multiple components.
Read more...

Advanced SolidWorks

 28 Hours

This instructor-led, live training in Texas (online or onsite) is aimed at intermediate-level to advanced-level mechatronics, mechanical, electrical, and electronics engineers who wish to further enhance their SolidWorks knowledge by mastering advanced part modeling, as well as other advanced features and shaping capabilities of SolidWorks.

By the end of this training, participants will be able to:

  • Use multi-body solids, sweeping and lofting features, and more advanced SolidWorks features.
  • Utilize the assembly modeling capabilities of SolidWorks.
  • Master the advanced modeling features of SolidWorks.
Read more...

Advanced AutoCAD

 14 Hours

This instructor-led, live training in Texas (online or onsite) is aimed at advanced-level web designers who wish to learn how to handle heavy drawings using AutoCAD.

By the end of this training, participants will be able to:

  • Understand the challenges associated with large drawings and implement strategies for efficient file organization.
  • Apply techniques to improve drawing performance and handle regenerations efficiently.
Read more...

CATIA V5 Fundamentals

 14 Hours

This instructor-led, live training in Texas (online or onsite) is aimed at beginner-level to intermediate-level web designers who wish to learn how to use CATIA V5 for collaborative product creation and product data management.

By the end of this training, participants will be able to:

  • Understand the CATIA V5 interface and navigation.
  • Create 2D sketches and transform them into 3D models.
  • Develop assemblies to combine multiple components.
Read more...

iPad SketchUp Pro for Interior Design and Spatial Modeling

 14 Hours

SketchUp Pro is a 3D modeling software used for architectural, interior design, and product visualization that enables users to create, modify, and present detailed spatial models efficiently.

This instructor-led, live training (online or onsite) is aimed at intermediate-level interior designers and design professionals who wish to master SketchUp Pro for iPad to create, visualize, and refine interior design concepts such as rooms, furniture, and layout compositions.

Upon completion of this training, participants will be able to:

  • Set up and navigate SketchUp Pro on iPad efficiently.
  • Create and modify interior models including walls, furniture, and spatial layouts.
  • Apply textures, materials, and lighting for realistic visualizations.
  • Export and share models for presentation and collaboration.

Format of the Course

  • Interactive lecture and guided demonstrations.
  • Hands-on exercises and modeling practice on iPad.
  • Live project work with feedback and Q&A sessions.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
Read more...

SolidWorks

 14 Hours

This instructor-led, live training in Texas (online or onsite) is aimed at mechatronics, mechanical, electrical, and electronics engineers who wish to use SolidWorks to sketch and produce a detailed drawing of their ideas and concepts.

By the end of this training, participants will be able to:

  • Understand the fundamentals of SolidWorks.
  • Design and create parts, assemblies, and 3D models with SolidWorks.
Read more...

Applying SysML with Magic Draw

 24 Hours

The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the Magicdraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE.

Read more...

AutoCAD: Beginner to Advanced

 21 Hours

This instructor-led, live training in Texas (online or onsite) is aimed at web designers who wish to create precise 2D models using AutoCAD.

By the end of this training, participants will be able to:

  • Create and update AutoCAD drawings, plans, and layouts.
  • Manage various style dimensions for advanced styling.
  • Master the Cartesian coordinate system to create meaningful and dynamic input.
Read more...

FreeCad: Getting Started with Parametric Modeling

 21 Hours

FreeCAD is an open-source, customizable, multi-platform, scriptable and extensible parametric 3D modeler for designing real-life objects.

In this instructor-led, live training, participants will learn how to model an object for later construction or 3D printing.

By the end of this training, participants will be able to:

  • Use FreeCad's tools and workflows to replace commercial CAD or BIM modeling software
  • Write to many formats such as STEP, IGES, STL, SVG, DXF, OBJ, IFC, DAE, etc.
  • Use Python to extend FreeCAD's functionality
  • Automate FreeCad, build modules and embed FreeCAD into an existing application

Audience

  • Designers
  • Developers
  • Mechanical engineers

Format of the course

  • Part lecture, part discussion, exercises and heavy hands-on practice
Read more...

MBSE with Automation

 40 Hours

The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training covers the fundamentals of creating templates and generating reports within the MagicDraw/Cameo tool suite, and teaches how macros and scripts work inside MagicDraw and what they can be applied to.

Read more...

MBSE with Model Analysis

 40 Hours

The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training teaches the core concepts and features of validation rules, validation suites, and model metrics and is designed to introduce the core concepts and features of developing and utilizing model queries in MagicDraw/Cameo.​

Read more...

SketchUp for Architecture

 14 Hours

This instructor-led, live training in Texas (online or onsite) is aimed at architects who wish to create 3D models for architectural designs using SketchUp.

By the end of this training, participants will be able to:

  • Use SketchUp to create 3D models of buildings, landscapes, scenes, furniture, etc.
  • Apply different types of materials to the interior and exterior of a 3D structure.
  • Geolocate a modeled structure for mapping realistic elements, such as shadows.
Read more...

Last Updated:

Testimonials (2)

Understanding how to interact with the software efficiently. There were many times I would initially go a certain way about completing a drawing, and then Jai would show me an easier or more efficient method.

Ben Milligan

Course - AutoCAD: Beginner to Advanced

The practices and the fact that you can share your screen for guidance from the trainer

Ramon Vann Cleff - DOST - Advanced Science and Technology Institute

Course - SolidWorks

Upcoming Courses

SketchUp for Architecture

2026-07-20 9:30 am
14 hours
Lubbock, TX
$ 3185 (Online)
$ 4385 (Classroom)

CATIA V5 Fundamentals

2026-08-03 9:30 am
14 hours
Austin, TX - Regus - Lamar Central
$ 2703 (Online)
$ 3903 (Classroom)

Introduction to Autodesk 3ds Max

2026-08-17 9:30 am
14 hours
Lubbock, TX
$ 2703 (Online)
$ 3903 (Classroom)

AutoCAD: Beginner to Advanced

2026-08-31 9:30 am
21 hours
Austin, TX - Regus - Lamar Central
$ 3041 (Online)
$ 4841 (Classroom)

FreeCad: Getting Started with Parametric Modeling

2026-09-14 9:30 am
21 hours
Lubbock, TX
$ 3041 (Online)
$ 4841 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

CAD Consulting
Online CAD training in Texas, CAD training courses in Texas, Weekend CAD (Computer-Aided Design) courses in Texas, Evening Computer-Aided Design (CAD) training in Texas, CAD (Computer-Aided Design) instructor-led in Texas, Evening Computer-Aided Design courses in Texas, Computer-Aided Design one on one training in Texas, Online Computer-Aided Design training in Texas, CAD (Computer-Aided Design) trainer in Texas, CAD boot camp in Texas, Weekend CAD training in Texas, CAD (Computer-Aided Design) coaching in Texas, Computer-Aided Design (CAD) private courses in Texas, Computer-Aided Design (CAD) instructor-led in Texas, CAD (Computer-Aided Design) classes in Texas, Computer-Aided Design (CAD) on-site in Texas, CAD (Computer-Aided Design) instructor in Texas