Totowa, NJ – Regus at Riverview Drive

999 Riverview Dr 2nd Floor, Totowa, United States, 07512

The venue is located in a landscaped corporate park off Route 46 and I‑80, offering easy access by car and free on-site parking. From Newark Liberty International Airport (EWR), about 15 miles away, a taxi or rideshare ride via I‑78 West typically takes 20–25 minutes. Visitors arriving by car from New York City or northern NJ can use I‑80, I‑287, or the Garden State Parkway. Public transit is also convenient: NJ Transit and local bus routes stop near the Riverview campus, and the Little Falls train station is just a short rideshare or walk away.

Princeton, NJ – Regus at Overlook Business Center

100 Overlook Center, 2nd Floor, Princeton, United States, 08540

The venue is located just off Route 1 within a landscaped office park at Overlook Center, easily reached by car via I‑95 or US‑1, with complimentary on-site parking. From Newark Liberty or Philadelphia International Airports, travel takes approximately 1–1.5 hours via I‑95 and US‑1. Attendees can also arrive by train: New Jersey Transit and Amtrak serve Princeton Junction Station (about 3 miles away), with local shuttle or taxi options for the final leg. Public transit users can take local DART or Coach USA buses that stop at Route 1 and University Drive, followed by a brief walk to building entrance.

Newark, NJ – At One Gateway Center

One Gateway Center, Suite 2600, Newark, United States, 07102

The venue is situated within the iconic One Gateway Center, directly connected to Newark Penn Station via covered walkway, and is conveniently accessible by car via I‑95, I‑78, I‑280, and the New Jersey Turnpike, with public garages nearby. Visitors arriving from Newark Liberty International Airport (EWR), roughly 3 miles away, can expect a 10-minute taxi or rideshare ride via I‑78 West. Those coming by train benefit from Penn Station, which also connects by PATH service to Manhattan in under 20 minutes. Local NJ Transit and Newark Light Rail bus routes also serve the Gateway complex, offering seamless public transit access.

Jersey City, NJ – Regus at Hudson Street

101 Hudson Street, 21st Floor, Jersey City, united states, 07302

The venue is located on the 21st floor of the 42‑story Merrill Lynch Building at 101 Hudson Street in Paulus Hook, reachable by car via I‑78, I‑95, or the New Jersey Turnpike, with public and building parking available. From Newark Liberty Airport (EWR), about 8 miles away, taxis or rideshares take 15–20 minutes via I‑78 East. Attendees arriving by train can use Newark Penn or PATH to Exchange Place or Newport stations, then walk 5–7 minutes to the building. Multiple NJ Transit and local bus routes also serve the area.

Trenton, NJ – Base Camp Trenton

247 E Front St, Trenton, United States, 08611

The venue is located in downtown Trenton on Front Street, just off Route 29 and a short drive from I‑295, offering easy car access with street and municipal lot parking nearby. Visitors coming from Newark Liberty International Airport (EWR), about 45 miles northeast, can expect a taxi or rideshare ride of roughly 50–60 minutes via I‑95 South. Those arriving from Philadelphia International Airport (PHL), approximately 25 miles southwest, typically take about 35–45 minutes via I‑95 North. Public transit is also convenient—NJ Transit trains arrive at Trenton Transit Center just a few blocks away and local DART First State buses stop near Front Street, placing the venue within short walking distance for attendees without a car.

Subcategories (1)

ONAP

ONAP

Explore Our Courses

Software-Defined Wide Area Network (SD-WAN) Management and Operation

 7 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at intermediate-level network professionals who wish to effectively manage and operate SD-WAN networks, including design, configuration, troubleshooting, and optimization.

By the end of this training, participants will be able to:

  • Understand the fundamental concepts, benefits, and challenges associated with SD-WAN technologies.
  • Design an SD-WAN architecture tailored to organizational needs and deploy SD-WAN solutions effectively.
  • Implement and manage security features within an SD-WAN.
  • Monitor, manage, and troubleshoot SD-WAN environments.
Read more...

Certified Kubernetes Administrator (CKA) - exam preparation

 21 Hours

The Certified Kubernetes Administrator (CKA) program was created by The Linux Foundation and the Cloud Native Computing Foundation (CNCF).

Kubernetes is nowadys a leading platform used for containers orchestration.

NobleProg have been delivering Docker & Kubernetes training from 2015. With more than 360 successfully completed training projects, we became one of the best known training companies worldwide in field of containerization.

Since 2019 we are also helping our customers to confirm their performance in k8s environment by preparing them and encouraging to pass CKA and CKAD exams.

This instructor-led, live training (online or onsite) is aimed at System Administrators, Kubernetes users who wish to confirm their knowledge by passing CKA exam.

On the other hand, training is focused also on gaining practical experience in Kubernetes Administration, so we recommend taking part in it, even if you don't intend to take CKA exam.

Format of the Course

  • Interactive lecture and discussion.
  • Lots of exercises and practice.
  • Hands-on implementation in a live-lab environment.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
  • To learn more about CKA certification, please visit: https://training.linuxfoundation.org/certification/certified-kubernetes-administrator-cka
Read more...

Certified Kubernetes Application Developer (CKAD) - exam preparation

 21 Hours

The Certified Kubernetes Application Developer (CKAD) program has been developed by The Linux Foundation and the Cloud Native Computing Foundation (CNCF), the host of Kubernetes.

This instructor-led, live training (online or onsite) is aimed at Developers who wish to confirm their skills in design, build, configure, and expose cloud native applications for Kubernetes. 

On the other hand, training is also focused on gaining practical experience in Kubernetes application development, so we recommend taking part in it, even if you don't intend to take CKAD exam.

NobleProg have been delivering Docker & Kubernetes training from 2015. With more than 360 successfully completed training projects, we became one of the best known training company worldwide in field of containerization. Since 2019 we are also helping our customers to confirm their performance in k8s environment by preparing them and encouraging to pass CKA and CKAD exams.

Format of the Course

  • Interactive lecture and discussion.
  • Lots of exercises and practice.
  • Hands-on implementation in a live-lab environment.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
  • To learn more about CKAD, please visit: https://training.linuxfoundation.org/certification/certified-kubernetes-application-developer-ckad/
Read more...

OpenStack and NFV (with OVN and OpenFlow)

 21 Hours

The course is a profound training on OpenStack networking. It starts with the introduction to OpenStack and its architecture, then clarifies core OpenStack projects as Identity service (Keystone), Image service (Glance), Compute service (Nova), Block storage (Cinder) in order to describe the surroundings of the networks in OpenStack and mainly focus on Networking project (Neutron). Virtual network infrastructure is described and based on the Open Virtual Network project, Open vSwitch and OpenFlow. The goal of the course is to understand basic operations and architecture of OpenStack as well as to familiarize participants with various networking technologies behind OpenStack, extending information about OVN and underlying flows, resources and tools.

Customization options

The training can be contracted to 2 days, focusing on core aspects relevant for the customer. The training can be also extended regarding administrative, design, networking and/or troubleshooting topics concerning OpenStack deployments. It is possible to describe other underlying SDN solutions like Linux Bridge or OvS.

Read more...

Akraino

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at programmers who wish to download, install, and set up Akraino Edge Stack blueprints to manage their edge systems.

By the end of this training, participants will be able to install, deploy, manage, and support end-to-end Akraino Edge Stack solutions to improve and organize their edge systems, services, and devices.

Read more...

CompTIA Network+ N10-008 exam prep with Exam (accredited training course with exam)

 35 Hours

In this course, you will describe the major networking technologies and systems of modern networks and configure, manage, and troubleshoot modern networks.

  • You will:
  • Explain the OSI and TCP/IP Models.
  • Explain properties of network traffic.
  • Install and configure switched networks.
  • Configure IP networks.
  • Install and configure routed networks.
  • Configure and monitor ports and protocols.
  • Explain network application and storage issues.
  • Monitor and troubleshoot networks.
  • Explain network attacks and mitigations.
  • Install and configure security devices.
  • Explain authentication and access controls.
  • Deploy and troubleshoot cabling solutions.
  • Implement and troubleshoot wireless technologies.
  • Compare and contrast WAN technologies.
  • Use remote access methods.
  • Identify site policies and best practices.
Read more...

Google Workspace (G Suite) for Administration

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at system administrators who wish to manage and deploy G Suite for organizations.

By the end of this training, participants will be able to:

  • Apply Google security practices with 2SV and SSO.
  • Monitor domain and services usage through reports in the Admin Console.
  • Set up and configure a G Suite Admin Console.
Read more...

LEDE: Set Up a Linux Wireless Router

 7 Hours

The LEDE Project (Linux Embedded Development Environment) is a Linux operating system based on OpenWrt. It is a complete replacement for the vendor-supplied firmware of a wide range of wireless routers and non-network devices.

In this instructor-led, live training, participants will learn how to set up a LEDE based wireless router.

Audience

  • Network administrators and technicians

Format of the course

  • Part lecture, part discussion, exercises and heavy hands-on practice
Read more...

Nessus Manager

 28 Hours

The Nessus vulnerability scanner is a very versatile platform for detecting and managing vulnerabilities. They can even do so much more than vulnerability detection. They can also do baseline auditing. In which case you system configuration is being compared with the best hardening standard

In this Instructor led course, we will introduce the components of the solution and the different t functionalities, each module in the application will be explained and its use case laid out.

At the end of the course, participants will be able to carry out vulnerability (authenticated and unauthenticated) scans on almost all IP based systems and analyze the results of the scan to eliminate false positives. The participants will learn to carry out risk based prioritization of findings and recommend compensating controls. This course will help the participants determine the security posture of their systems using Nessus and decide on the best course of action for remediation.

Audience:

  • Infrastructure managers
  • System administrators
  • System Auditors
  • System compliance officers
  • vulnerability managers
  • cybersecurity managers

Format:

Part Lecture, part discussion and hands on practice

Read more...

ONAP for Network Orchestration and Automation

 28 Hours

In this instructor-led, live training in New Jersey (online or onsite), participants will learn how to use ONAP to automate networking services.

By the end of this training, participants will be able to:

  • Understand, install and configure the various components in the ONAP ecosystem.
  • Carry out real-time, policy-driven orchestration and automation of physical and virtual network functions.
  • Design, create, orchestrate, and monitor VNFs, SDNs and other network services.
  • Efficiently manage the entire networking lifecycle using a software-driven approach.
  • Develop, deploy, and scale a network using the latest open source technologies and practices.
Read more...

Varnish: Speeding Up Your Website with HTTP Reverse Proxy Caching

 7 Hours

Varnish is a reverse proxy for content-heavy dynamic web sites. Unlike Squid, which was originally a client-side cache, or Apache and nginx, which are web servers, Varnish was designed as an HTTP accelerator. Varnish is focused exclusively on HTTP, unlike other proxy servers that support FTP, SMTP and other network protocols. Varnish is used by Wikipedia, The New York Times, Facebook and Twitter, among other high-profile websites.

In this course, participants will learn about Varnish's features and caching approach while practicing in the setup and configuration of a Varnish proxy on Linux. The course starts with a refresher on key networking principles, then digs into setup and configuration topics and moves steadily towards complex implementations. By the end of the training participants will understand when and where it makes sense to deploy Varnish and will have the necessary practice to deploy their own Varnish proxy solutions.

Audience

  • Network technicians
  • Network designers
  • System administrators

Format of the course

  • Part lecture, part discussion, heavy hands-on practice and implementation, occasional quizing to measure progress
Read more...

Network Troubleshooting with Wireshark

 21 Hours

Network packet analysis is a technique used to view, in real time, the raw data sent and received over a network interface. This is useful for troubleshooting network configuration and network application problems. Wireshark is a free open source packet analyzer used for troubleshooting such network issues.

In this instructor-led, live training, participants will learn how to use Wireshark to troubleshoot the functionality of a network as well as the performance of differente networked applications. Participants will learn network troubleshooting principles and practice techniques for capturing and analyzing TCP/IP request and response traffic between different clients and the servers.

By the end of this training, participants will be able to:

  • Analyze network functionality and performance in various environments under different conditions
  • Determine whether instances of different server applications are performing acceptably
  • Identify the primary sources of network performance problems
  • Identify and troubleshoot the most common causes of performance problems in TCP/IP communications

Audience

  • Network engineers
  • Network and computer technicians

Format of the Course

  • Part lecture, part discussion, exercises and heavy hands-on practice

Note

  • To request a customized training for this course, please contact us to arrange.
Read more...

Network Security Administrator

 35 Hours

Audience:

System Administrators and Network Administrators as well as anyone who is interested in defensive network security technologies.

Read more...

Last Updated:

Testimonials (5)

Quality of explanation of program operation and analysis of various cases.

Krzysztof - Centrum Informatyki Resortu Finansow

Course - Network Troubleshooting with Wireshark

He explained everything, not only k8s notions.

Stefan Voinea - EMAG IT Research S.R.L

Course - Certified Kubernetes Application Developer (CKAD) - exam preparation

the way the trainer used to explain by drawing diagrams and not just going through the slides and reading from it.

Ibrahim Ghassal - Saudi Airlines

Course - CompTIA Network +

Depth of knowledge of the trainer

Grant Miller - BMW

Course - Certified Kubernetes Administrator (CKA) - exam preparation

The course build up the whole picture and helped me understand in depth how to deal with everyday tasks I perform with Tenable Census Manager.

Konstantinos Papadopoulos

Course - Nessus Manager

Upcoming Courses

LEDE: Set Up a Linux Wireless Router

2025-09-15 9:30 am
7 hours
Princeton, NJ – Regus at Overlook Business Center
$ 1838 (Online)
$ 1838 (Classroom)

Network Security Administrator

2025-09-29 9:30 am
35 hours
Totowa, NJ – Regus at Riverview Drive
$ 6757 (Online)
$ 6757 (Classroom)

Akraino

2025-10-13 9:30 am
14 hours
Princeton, NJ – Regus at Overlook Business Center
$ 2703 (Online)
$ 2703 (Classroom)

Network Troubleshooting with Wireshark

2025-10-27 9:30 am
21 hours
Totowa, NJ – Regus at Riverview Drive
$ 4054 (Online)
$ 4054 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

Network Administration Consulting
Online Network Administration training in New Jersey, Network Administration training courses in New Jersey, Weekend Network Administration courses in New Jersey, Evening Network Administration training in New Jersey, Network Administration instructor-led in New Jersey, Network Administration boot camp in New Jersey, Weekend Network Administration training in New Jersey, Network Administration instructor in New Jersey, Network Administration instructor-led in New Jersey, Network Administration classes in New Jersey, Network Administration coaching in New Jersey, Evening Network Administration courses in New Jersey, Network Administration trainer in New Jersey, Network Administration one on one training in New Jersey, Online Network Administration training in New Jersey, Network Administration private courses in New Jersey, Network Administration on-site in New Jersey