Cincinnati, OH - Regus - Downtown - PNC Center

201 E 5th St, Suite 1900, Cincinnati, United States, 45202

The venue is located in the corporate heart of downtown Cincinnati at 201 East 5th Street inside the iconic PNC Center skyscraper. It is easily reached by car via I‑71, I‑75, or US‑50 with convenient paid underground parking available in the building structure. From Cincinnati/Northern Kentucky International Airport (CVG), take I‑71 North into the city, then exit at 5th Street—taxi or rideshare typically takes about 20 minutes. Public transit options include multiple Metro routes stopping at Government Square and the nearby streetcar lines, followed by a short walk to the tower entrance.

Columbus, OH - Galleria at PNC Plaza

20 S 3rd St Suite 210, Columbus, United States, 43215

The venue is located in the heart of Downtown Columbus at 20 South Third Street, nestled within the Galleria at PNC Plaza. It is easily reachable by car via Interstates 70 and 71 with exits to Broad or Third Street, and offers secure underground paid parking beneath the building. From John Glenn Columbus International Airport (CMH), take I‑670 West into downtown, then exit at Third Street—taxi or rideshare typically takes about 15 minutes. Public transit users benefit from Central Ohio Transit Authority (COTA) buses and the CBUS free circulator, both stopping within a 2‑3 minute walk of the venue on Third or Broad Street.

OH, Cleveland

230 W. Huron Road, Cleveland, United States, 44113

The venue is located behind the Tower City Public Square Station.

Cleveland, OH – Regus Cleveland City Center

600 Superior Avenue East, Fifth Third Center, Suite 1300, Cleveland, United States, 44114

The venue is located on the 13th floor of Fifth Third Center at 600 Superior Avenue East in downtown Cleveland, easily reached by car via I‑90 or I‑77 with covered building garage parking (852 spaces) and nearby municipal lots. Visitors from Cleveland Hopkins Airport (CLE), about 17 miles southwest, can expect a 20–25‑minute taxi or rideshare ride via I‑71 North and I‑90 East. For public transit users, the venue is just steps from Tower City–Public Square RTA Rapid Transit station (Red/Blue/Green lines), and multiple bus routes serve the plaza—making the site highly accessible even without a car.
NobleProg Training Place, City Cleveland, OH - Regus at 9th Street

Cleveland, OH - Regus at 9th Street

1300 E 9th Street, 12th Floor, Cleveland, United States, 44114

The venue is located in Midtown Cleveland at 1300 East 9th Street, easily accessible by car via I‑90 or I‑77 with exit ramps to East 9th Street and nearby paid parking garages. From Cleveland Hopkins International Airport (CLE), take I‑71 North into the city, exit at East 9th Street, and the drive typically takes about 15 minutes by taxi or rideshare. Public transit is highly convenient with the Cleveland RTA bus routes along E. 9th or St. Clair Avenue and Cleveland Train Station just 0.4 miles away, followed by a short walk to the building.

Subcategories (1)

ONAP

ONAP

Explore Our Courses

Software-Defined Wide Area Network (SD-WAN) Management and Operation

 7 Hours

This instructor-led, live training in Ohio (online or onsite) is aimed at intermediate-level network professionals who wish to effectively manage and operate SD-WAN networks, including design, configuration, troubleshooting, and optimization.

By the end of this training, participants will be able to:

  • Understand the fundamental concepts, benefits, and challenges associated with SD-WAN technologies.
  • Design an SD-WAN architecture tailored to organizational needs and deploy SD-WAN solutions effectively.
  • Implement and manage security features within an SD-WAN.
  • Monitor, manage, and troubleshoot SD-WAN environments.
Read more...

Certified Kubernetes Administrator (CKA) - exam preparation

 21 Hours

The Certified Kubernetes Administrator (CKA) program was created by The Linux Foundation and the Cloud Native Computing Foundation (CNCF).

Kubernetes is nowadys a leading platform used for containers orchestration.

NobleProg have been delivering Docker & Kubernetes training from 2015. With more than 360 successfully completed training projects, we became one of the best known training companies worldwide in field of containerization.

Since 2019 we are also helping our customers to confirm their performance in k8s environment by preparing them and encouraging to pass CKA and CKAD exams.

This instructor-led, live training (online or onsite) is aimed at System Administrators, Kubernetes users who wish to confirm their knowledge by passing CKA exam.

On the other hand, training is focused also on gaining practical experience in Kubernetes Administration, so we recommend taking part in it, even if you don't intend to take CKA exam.

Format of the Course

  • Interactive lecture and discussion.
  • Lots of exercises and practice.
  • Hands-on implementation in a live-lab environment.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
  • To learn more about CKA certification, please visit: https://training.linuxfoundation.org/certification/certified-kubernetes-administrator-cka
Read more...

Certified Kubernetes Application Developer (CKAD) - exam preparation

 21 Hours

The Certified Kubernetes Application Developer (CKAD) program has been developed by The Linux Foundation and the Cloud Native Computing Foundation (CNCF), the host of Kubernetes.

This instructor-led, live training (online or onsite) is aimed at Developers who wish to confirm their skills in design, build, configure, and expose cloud native applications for Kubernetes. 

On the other hand, training is also focused on gaining practical experience in Kubernetes application development, so we recommend taking part in it, even if you don't intend to take CKAD exam.

NobleProg have been delivering Docker & Kubernetes training from 2015. With more than 360 successfully completed training projects, we became one of the best known training company worldwide in field of containerization. Since 2019 we are also helping our customers to confirm their performance in k8s environment by preparing them and encouraging to pass CKA and CKAD exams.

Format of the Course

  • Interactive lecture and discussion.
  • Lots of exercises and practice.
  • Hands-on implementation in a live-lab environment.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
  • To learn more about CKAD, please visit: https://training.linuxfoundation.org/certification/certified-kubernetes-application-developer-ckad/
Read more...

OpenStack and NFV (with OVN and OpenFlow)

 21 Hours

The course is a profound training on OpenStack networking. It starts with the introduction to OpenStack and its architecture, then clarifies core OpenStack projects as Identity service (Keystone), Image service (Glance), Compute service (Nova), Block storage (Cinder) in order to describe the surroundings of the networks in OpenStack and mainly focus on Networking project (Neutron). Virtual network infrastructure is described and based on the Open Virtual Network project, Open vSwitch and OpenFlow. The goal of the course is to understand basic operations and architecture of OpenStack as well as to familiarize participants with various networking technologies behind OpenStack, extending information about OVN and underlying flows, resources and tools.

Customization options

The training can be contracted to 2 days, focusing on core aspects relevant for the customer. The training can be also extended regarding administrative, design, networking and/or troubleshooting topics concerning OpenStack deployments. It is possible to describe other underlying SDN solutions like Linux Bridge or OvS.

Read more...

Akraino

 14 Hours

This instructor-led, live training in Ohio (online or onsite) is aimed at programmers who wish to download, install, and set up Akraino Edge Stack blueprints to manage their edge systems.

By the end of this training, participants will be able to install, deploy, manage, and support end-to-end Akraino Edge Stack solutions to improve and organize their edge systems, services, and devices.

Read more...

CompTIA Network+ N10-008 exam prep with Exam (accredited training course with exam)

 35 Hours

In this course, you will describe the major networking technologies and systems of modern networks and configure, manage, and troubleshoot modern networks.

  • You will:
  • Explain the OSI and TCP/IP Models.
  • Explain properties of network traffic.
  • Install and configure switched networks.
  • Configure IP networks.
  • Install and configure routed networks.
  • Configure and monitor ports and protocols.
  • Explain network application and storage issues.
  • Monitor and troubleshoot networks.
  • Explain network attacks and mitigations.
  • Install and configure security devices.
  • Explain authentication and access controls.
  • Deploy and troubleshoot cabling solutions.
  • Implement and troubleshoot wireless technologies.
  • Compare and contrast WAN technologies.
  • Use remote access methods.
  • Identify site policies and best practices.
Read more...

Google Workspace (G Suite) for Administration

 14 Hours

This instructor-led, live training in Ohio (online or onsite) is aimed at system administrators who wish to manage and deploy G Suite for organizations.

By the end of this training, participants will be able to:

  • Apply Google security practices with 2SV and SSO.
  • Monitor domain and services usage through reports in the Admin Console.
  • Set up and configure a G Suite Admin Console.
Read more...

LEDE: Set Up a Linux Wireless Router

 7 Hours

The LEDE Project (Linux Embedded Development Environment) is a Linux operating system based on OpenWrt. It is a complete replacement for the vendor-supplied firmware of a wide range of wireless routers and non-network devices.

In this instructor-led, live training, participants will learn how to set up a LEDE based wireless router.

Audience

  • Network administrators and technicians

Format of the course

  • Part lecture, part discussion, exercises and heavy hands-on practice
Read more...

Nessus Manager

 28 Hours

The Nessus vulnerability scanner is a very versatile platform for detecting and managing vulnerabilities. They can even do so much more than vulnerability detection. They can also do baseline auditing. In which case you system configuration is being compared with the best hardening standard

In this Instructor led course, we will introduce the components of the solution and the different t functionalities, each module in the application will be explained and its use case laid out.

At the end of the course, participants will be able to carry out vulnerability (authenticated and unauthenticated) scans on almost all IP based systems and analyze the results of the scan to eliminate false positives. The participants will learn to carry out risk based prioritization of findings and recommend compensating controls. This course will help the participants determine the security posture of their systems using Nessus and decide on the best course of action for remediation.

Audience:

  • Infrastructure managers
  • System administrators
  • System Auditors
  • System compliance officers
  • vulnerability managers
  • cybersecurity managers

Format:

Part Lecture, part discussion and hands on practice

Read more...

ONAP for Network Orchestration and Automation

 28 Hours

In this instructor-led, live training in Ohio (online or onsite), participants will learn how to use ONAP to automate networking services.

By the end of this training, participants will be able to:

  • Understand, install and configure the various components in the ONAP ecosystem.
  • Carry out real-time, policy-driven orchestration and automation of physical and virtual network functions.
  • Design, create, orchestrate, and monitor VNFs, SDNs and other network services.
  • Efficiently manage the entire networking lifecycle using a software-driven approach.
  • Develop, deploy, and scale a network using the latest open source technologies and practices.
Read more...

Varnish: Speeding Up Your Website with HTTP Reverse Proxy Caching

 7 Hours

Varnish is a reverse proxy for content-heavy dynamic web sites. Unlike Squid, which was originally a client-side cache, or Apache and nginx, which are web servers, Varnish was designed as an HTTP accelerator. Varnish is focused exclusively on HTTP, unlike other proxy servers that support FTP, SMTP and other network protocols. Varnish is used by Wikipedia, The New York Times, Facebook and Twitter, among other high-profile websites.

In this course, participants will learn about Varnish's features and caching approach while practicing in the setup and configuration of a Varnish proxy on Linux. The course starts with a refresher on key networking principles, then digs into setup and configuration topics and moves steadily towards complex implementations. By the end of the training participants will understand when and where it makes sense to deploy Varnish and will have the necessary practice to deploy their own Varnish proxy solutions.

Audience

  • Network technicians
  • Network designers
  • System administrators

Format of the course

  • Part lecture, part discussion, heavy hands-on practice and implementation, occasional quizing to measure progress
Read more...

Network Troubleshooting with Wireshark

 21 Hours

Network packet analysis is a technique used to view, in real time, the raw data sent and received over a network interface. This is useful for troubleshooting network configuration and network application problems. Wireshark is a free open source packet analyzer used for troubleshooting such network issues.

In this instructor-led, live training, participants will learn how to use Wireshark to troubleshoot the functionality of a network as well as the performance of differente networked applications. Participants will learn network troubleshooting principles and practice techniques for capturing and analyzing TCP/IP request and response traffic between different clients and the servers.

By the end of this training, participants will be able to:

  • Analyze network functionality and performance in various environments under different conditions
  • Determine whether instances of different server applications are performing acceptably
  • Identify the primary sources of network performance problems
  • Identify and troubleshoot the most common causes of performance problems in TCP/IP communications

Audience

  • Network engineers
  • Network and computer technicians

Format of the Course

  • Part lecture, part discussion, exercises and heavy hands-on practice

Note

  • To request a customized training for this course, please contact us to arrange.
Read more...

Network Security Administrator

 35 Hours

Audience:

System Administrators and Network Administrators as well as anyone who is interested in defensive network security technologies.

Read more...

Last Updated:

Testimonials (5)

Quality of explanation of program operation and analysis of various cases.

Krzysztof - Centrum Informatyki Resortu Finansow

Course - Network Troubleshooting with Wireshark

He explained everything, not only k8s notions.

Stefan Voinea - EMAG IT Research S.R.L

Course - Certified Kubernetes Application Developer (CKAD) - exam preparation

the way the trainer used to explain by drawing diagrams and not just going through the slides and reading from it.

Ibrahim Ghassal - Saudi Airlines

Course - CompTIA Network +

Depth of knowledge of the trainer

Grant Miller - BMW

Course - Certified Kubernetes Administrator (CKA) - exam preparation

The course build up the whole picture and helped me understand in depth how to deal with everyday tasks I perform with Tenable Census Manager.

Konstantinos Papadopoulos

Course - Nessus Manager

Upcoming Courses

LEDE: Set Up a Linux Wireless Router

2025-09-15 9:30 am
7 hours
Cleveland, OH – Regus Cleveland City Center
$ 1838 (Online)
$ 1838 (Classroom)

Network Security Administrator

2025-09-29 9:30 am
35 hours
OH, Cleveland
$ 6757 (Online)
$ 9257 (Classroom)

Akraino

2025-10-13 9:30 am
14 hours
Cleveland, OH – Regus Cleveland City Center
$ 2703 (Online)
$ 2703 (Classroom)

Network Troubleshooting with Wireshark

2025-10-27 9:30 am
21 hours
OH, Cleveland
$ 4054 (Online)
$ 5554 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

Network Administration Consulting
Online Network Administration training in Ohio, Network Administration training courses in Ohio, Weekend Network Administration courses in Ohio, Evening Network Administration training in Ohio, Network Administration instructor-led in Ohio, Network Administration instructor-led in Ohio, Online Network Administration training in Ohio, Network Administration coaching in Ohio, Network Administration one on one training in Ohio, Network Administration on-site in Ohio, Network Administration private courses in Ohio, Network Administration trainer in Ohio, Evening Network Administration courses in Ohio, Network Administration classes in Ohio, Network Administration instructor in Ohio, Weekend Network Administration training in Ohio, Network Administration boot camp in Ohio