Totowa, NJ – Regus at Riverview Drive

999 Riverview Dr 2nd Floor, Totowa, United States, 07512

The venue is located in a landscaped corporate park off Route 46 and I‑80, offering easy access by car and free on-site parking. From Newark Liberty International Airport (EWR), about 15 miles away, a taxi or rideshare ride via I‑78 West typically takes 20–25 minutes. Visitors arriving by car from New York City or northern NJ can use I‑80, I‑287, or the Garden State Parkway. Public transit is also convenient: NJ Transit and local bus routes stop near the Riverview campus, and the Little Falls train station is just a short rideshare or walk away.

Princeton, NJ – Regus at Overlook Business Center

100 Overlook Center, 2nd Floor, Princeton, United States, 08540

The venue is located just off Route 1 within a landscaped office park at Overlook Center, easily reached by car via I‑95 or US‑1, with complimentary on-site parking. From Newark Liberty or Philadelphia International Airports, travel takes approximately 1–1.5 hours via I‑95 and US‑1. Attendees can also arrive by train: New Jersey Transit and Amtrak serve Princeton Junction Station (about 3 miles away), with local shuttle or taxi options for the final leg. Public transit users can take local DART or Coach USA buses that stop at Route 1 and University Drive, followed by a brief walk to building entrance.

Newark, NJ – At One Gateway Center

One Gateway Center, Suite 2600, Newark, United States, 07102

The venue is situated within the iconic One Gateway Center, directly connected to Newark Penn Station via covered walkway, and is conveniently accessible by car via I‑95, I‑78, I‑280, and the New Jersey Turnpike, with public garages nearby. Visitors arriving from Newark Liberty International Airport (EWR), roughly 3 miles away, can expect a 10-minute taxi or rideshare ride via I‑78 West. Those coming by train benefit from Penn Station, which also connects by PATH service to Manhattan in under 20 minutes. Local NJ Transit and Newark Light Rail bus routes also serve the Gateway complex, offering seamless public transit access.

Jersey City, NJ – Regus at Hudson Street

101 Hudson Street, 21st Floor, Jersey City, united states, 07302

The venue is located on the 21st floor of the 42‑story Merrill Lynch Building at 101 Hudson Street in Paulus Hook, reachable by car via I‑78, I‑95, or the New Jersey Turnpike, with public and building parking available. From Newark Liberty Airport (EWR), about 8 miles away, taxis or rideshares take 15–20 minutes via I‑78 East. Attendees arriving by train can use Newark Penn or PATH to Exchange Place or Newport stations, then walk 5–7 minutes to the building. Multiple NJ Transit and local bus routes also serve the area.

Trenton, NJ – Base Camp Trenton

247 E Front St, Trenton, United States, 08611

The venue is located in downtown Trenton on Front Street, just off Route 29 and a short drive from I‑295, offering easy car access with street and municipal lot parking nearby. Visitors coming from Newark Liberty International Airport (EWR), about 45 miles northeast, can expect a taxi or rideshare ride of roughly 50–60 minutes via I‑95 South. Those arriving from Philadelphia International Airport (PHL), approximately 25 miles southwest, typically take about 35–45 minutes via I‑95 North. Public transit is also convenient—NJ Transit trains arrive at Trenton Transit Center just a few blocks away and local DART First State buses stop near Front Street, placing the venue within short walking distance for attendees without a car.

Subcategories (8)

Wireshark

Wireshark
VoIP

VoIP
Cisco

Cisco
Telecom

Telecom
Network Administration

Network Administration
HAProxy

HAProxy
Data Network

Data Network
Software-Defined Networking (SDN)

Software-Defined Networking (SDN)

Explore Our Courses

GNS3 Advanced: Automation, Docker, and Cloud Integration

 21 Hours

GNS3 is a flexible network simulation tool that supports integration with automation frameworks, container-based services, and cloud environments for advanced lab setups.

This instructor-led, live training (online or onsite) is aimed at advanced-level networking professionals who wish to automate, containerize, and scale their GNS3 labs with real-world architectures involving hybrid and multi-cloud platforms.

By the end of this training, participants will be able to:

  • Automate network tasks using Python scripts and Ansible in GNS3 environments.
  • Deploy Docker containers inside GNS3 to simulate network services and endpoints.
  • Integrate GNS3 with cloud platforms such as AWS and Azure for hybrid lab environments.
  • Design advanced, scalable topologies for multi-vendor testing and continuous integration.

Format of the Course

  • Interactive lecture and discussion.
  • Hands-on lab configuration using live GNS3 topologies.
  • Integration exercises with automation and container orchestration tools.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
Read more...

GNS3 for Network Design and Testing

 21 Hours

GNS3 is a powerful network simulation platform that enables professionals to build, test, and validate complex network designs in a virtualized environment.

This instructor-led, live training (online or onsite) is aimed at intermediate-level to advanced-level IT professionals who wish to use GNS3 for network planning, testing, and production environment replication.

By the end of this training, participants will be able to:

  • Design and simulate enterprise-grade network architectures using GNS3.
  • Replicate production environments for safe testing and change validation.
  • Integrate real operating systems and services into GNS3 topologies.
  • Use GNS3 for troubleshooting, documentation, and client demos.

Format of the Course

  • Interactive lecture and discussion.
  • Realistic network simulations and hands-on labs.
  • Project-based exercises focused on design and testing use cases.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
Read more...

GNS3 for Cisco Certification (CCNA/CCNP)

 21 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at intermediate-level networking professionals who wish to prepare for Cisco CCNA or CCNP certifications using GNS3 to simulate Cisco devices and build exam-aligned topologies.

By the end of this training, participants will be able to:

  • Install and configure GNS3 for Cisco certification lab environments.
  • Import and manage Cisco IOS images for routers and switches.
  • Build and test topologies aligned with CCNA and CCNP exam objectives.
  • Practice real-world routing, switching, and troubleshooting scenarios.
Read more...

OpenDaylight in Production: Scaling and Optimizing SDN Deployments

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at intermediate-level IT architects, network administrators, and engineers who wish to deploy OpenDaylight in production environments, optimize its performance for large-scale use, and troubleshoot common issues in SDN deployments.

By the end of this training, participants will be able to:

  • Deploy OpenDaylight in production environments for scalable SDN solutions.
  • Optimize the performance of OpenDaylight deployments to handle high traffic volumes.
  • Troubleshoot and resolve common issues in SDN deployments.
  • Monitor and maintain OpenDaylight environments for long-term stability.
  • Scale OpenDaylight deployments to meet growing network demands.
Read more...

Developing Applications with OpenDaylight

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at intermediate-level SDN developers and software engineers who wish to learn how to build custom SDN applications using OpenDaylight APIs and YANG models to enhance network functionality and scalability.

By the end of this training, participants will be able to:

  • Understand the architecture and components of OpenDaylight.
  • Use OpenDaylight APIs to build SDN applications.
  • Create and manage YANG models for network customization.
  • Deploy, test, and debug custom applications in an OpenDaylight environment.
  • Integrate OpenDaylight with external systems and network devices.
Read more...

GNS3 for Beginners

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at beginner-level networking professionals who wish to learn how to use GNS3 to simulate basic networks and gain hands-on lab experience for certification and practical knowledge.

By the end of this training, participants will be able to:

  • Install and configure GNS3 on their local system.
  • Understand and use the GNS3 graphical interface and topology builder.
  • Create and test basic network topologies with routers, switches, and PCs.
  • Integrate GNS3 with tools like Wireshark for packet analysis.
Read more...

ONOS in Production: Deployment and Optimization

 21 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at intermediate-level IT architects and network managers who wish to deploy and optimize ONOS in production environments, ensuring scalability, performance, and reliability.

By the end of this training, participants will be able to:

  • Understand the architecture and core features of ONOS for production use.
  • Deploy ONOS in a production environment using best practices.
  • Configure clustering, redundancy, and fault tolerance in ONOS.
  • Monitor, troubleshoot, and optimize ONOS deployments for scalability and performance.
  • Integrate ONOS with existing network infrastructure and tools.
  • Plan and execute a successful ONOS upgrade process.
Read more...

Developing Applications for ONOS

 21 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at intermediate-level SDN developers and network engineers who wish to develop custom applications on the ONOS platform to address specific network challenges and enhance SDN capabilities.

By the end of this training, participants will be able to:

  • Understand the architecture and core components of ONOS.
  • Set up a development environment for ONOS applications.
  • Create, test, and deploy ONOS applications for managing SDN networks.
  • Integrate ONOS applications with external systems and APIs.
  • Troubleshoot and optimize ONOS applications for performance and scalability.
Read more...

Fiber Optic Networks (Point to Point and FTTH)

 21 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at intermediate-level network engineers who wish to gain the skills needed to design, install, and maintain fiber optic networks.

By the end of this training, participants will be able to:

  • Understand the fundamentals of fiber optic technology.
  • Apply network design principles for point-to-point and FTTH networks.
  • Install and maintain fiber optic cables and connectors.
  • Test and troubleshoot fiber optic networks.
Read more...

OpenDaylight for Network Engineers

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at intermediate-level network engineers and DevOps teams who wish to deploy, configure, and manage SDN solutions using the OpenDaylight platform.

By the end of this training, participants will be able to:

  • Understand OpenDaylight's architecture, components, and role in SDN ecosystems.
  • Install and configure OpenDaylight for various network scenarios.
  • Develop and deploy network flows using OpenDaylight controllers.
  • Integrate OpenDaylight with SDN-enabled devices and existing networks.
  • Troubleshoot and optimize OpenDaylight deployments for real-world use cases.
Read more...

Spine-Leaf Architecture with VXLAN in Database Management

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at intermediate-level to advanced-level database administrators, network engineers, and IT professionals who wish to optimize database performance, scalability, and reliability using Spine-Leaf architecture with VXLAN.

By the end of this training, participants will be able to:

  • Understand the Spine-Leaf network topology and its benefits.
  • Implement VXLAN for scalable and efficient database networking.
  • Optimize database workloads across distributed data center environments.
  • Deploy Spine-Leaf architecture in cloud and on-premises data centers.
  • Enhance network security, redundancy, and fault tolerance for database environments.
  • Automate network configurations for database management using Python and Ansible.
Read more...

Advanced Networking

 21 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at intermediate-level to advanced-level networking professionals who wish to expand their expertise in advanced networking practices using Linux.

By the end of this training, participants will be able to:

  • Implement advanced networking protocols and configurations under Linux.
  • Configure and manage Virtual Private Networks (VPNs).
  • Set up and secure firewalls for a robust network security setup.
  • Monitor and troubleshoot network performance issues.
Read more...

Microwave Point to Point & Point to MultiPoint

 21 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at intermediate-level network engineers who wish to use, maintain, and troubleshoot microwave networks effectively.

By the end of this training, participants will be able to:

  • Understand the principles and operation of microwave communication systems.
  • Design and implement point-to-point and point-to-multipoint microwave links.
  • Perform link budget analysis and network planning.
  • Operate, maintain, and troubleshoot microwave networks effectively.
Read more...

ONOS for Network Engineers: Managing SDN Environments

 21 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at intermediate-level network engineers, DevOps teams, and SDN developers who wish to understand and manage SDN environments using ONOS effectively.

By the end of this training, participants will be able to:

  • Understand the architecture and components of ONOS.
  • Install and configure ONOS in a lab environment.
  • Explore the capabilities of ONOS for managing SDN environments.
  • Deploy, manage, and troubleshoot SDN networks using ONOS.
Read more...

OpenDaylight for Network Automation

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at beginner-level network engineers and IT administrators who wish to learn fundamental OpenDaylight concepts, understand its role in network automation, and begin automating network configurations and operations.

By the end of this training, participants will be able to:

  • Understand the role of OpenDaylight in software-defined networking (SDN).
  • Install and configure OpenDaylight on a Linux-based system.
  • Explore the OpenDaylight architecture and core features.
  • Create basic automated network configurations using OpenDaylight.
  • Monitor and manage networks using OpenDaylight controllers.
Read more...

Networking Fundamentals

 21 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at anyone who wish to understand and implement a network and various types of servers under Linux.

By the end of this training, participants will be able to:

  • Understand how networking works under Linux.
  • Set up a sample LAN.
  • Understand the various protocols used on the internet and implement each one under Linux.
  • Secure a networking and various types of servers, such as a webs server.
Read more...

ONOS Fundamentals: Deploying Scalable SDN Solutions

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at beginner-level networking professionals and IT administrators who wish to understand the foundational concepts of ONOS, its architecture, and its deployment for scalable SDN solutions.

By the end of this training, participants will be able to:

  • Understand the role of ONOS in software-defined networking (SDN).
  • Describe the architecture and core components of ONOS.
  • Install and configure ONOS on a Linux-based system.
  • Set up a basic SDN network using ONOS.
  • Explore ONOS features for managing and scaling network infrastructure.
Read more...

Introduction to OpenDaylight: Understanding SDN Fundamentals

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at beginner-level network engineers and IT professionals who wish to gain a foundational understanding of SDN concepts, learn about the architecture of OpenDaylight, and perform basic installation and configuration tasks.

By the end of this training, participants will be able to:

  • Understand the principles and benefits of software-defined networking (SDN).
  • Explore the architecture and components of OpenDaylight.
  • Install and configure OpenDaylight on a Linux system.
  • Integrate OpenDaylight with networking devices.
  • Execute basic OpenDaylight operations and commands.
Read more...

Certified Telecommunication Network & Link Integration

 28 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at intermediate-level telecommunications engineers who wish to gain the knowledge and skills necessary to design, implement, and maintain telecommunication networks with a focus on link integration, ensuring seamless communication and data transfer across networks.

By the end of this training, participants will be able to:

  • Understand the fundamentals of telecommunication networks.
  • Design and implement telecommunication networks.
  • Apply advanced link integration strategies.
  • Troubleshoot and resolve integration issues.
Read more...

Kubernetes Networking with Calico

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at engineers who wish to optimize networking for Kubernetes clusters.

By the end of this training, participants will be able to:

  • Install and configure Calico.
  • Understand how Calico differs from traditional overlay networks.
  • Understand how Calico combines internet routing protocols with consensus-based data stores.
  • Use Calico to create a container networking solution for Kubernetes clusters.
  • Use Calico to provide network policy for Kubernetes.
Read more...

Deep Learning for Telecom (with Python)

 28 Hours

In this instructor-led, live training in New Jersey, participants will learn how to implement deep learning models for telecom using Python as they step through the creation of a deep learning credit risk model.

By the end of this training, participants will be able to:

  • Understand the fundamental concepts of deep learning.
  • Learn the applications and uses of deep learning in telecom.
  • Use Python, Keras, and TensorFlow to create deep learning models for telecom.
  • Build their own deep learning customer churn prediction model using Python.
Read more...

OpenStack Architecture and Troubleshooting

 14 Hours

The aim of this course is twofold - gain solid knowledge about OpenStack architecture and acquire profound troubleshooting skills. In the architecture part you will learn how to design the hardware for the public and private cloud, prepare high-availability control plane, choose proper size of the flavours, and safely overcommit cloud resources, among other things. Getting knowledge about the internals of Neutron (Networking Service) is another essential part in OpenStack architecture. Next the participant will be introduced into methods of troubleshooting issues in OpenStack clusters starting from general tips, through network troubleshooting up to caveats of main OpenStack services. Around 75% of the course comprises of hands-on workshops in the real OpenStack training environment.

Read more...

OpenStack Bootcamp

 28 Hours

The course is a comprehensive training on OpenStack. It starts with the introduction to the system, then through hands-on workshops it gives practical knowledge on managing private clouds based on OpenStack, finally troubleshooting and advanced, architectural topics are present. The goal of this course is to familiarize with the OpenStack ecosystem as well as to give a strong background for further expansion and refinement of the OpenStack clouds. The course comprises all topics necessary to accomplish the Certificate OpenStack Administrator exam. 75% of the course is based on hands-on workshop in the real OpenStack training environment.

Read more...

OpenStack Bootcamp Extended

 35 Hours

The course is a comprehensive training on OpenStack, extended version of the OpenStack Bootcamp course includes extra excercises, troubleshooting and sample examination tasks. Extended content is highlited in bold in the course outline. It starts with the introduction to the system, then through hands-on workshops it gives practical knowledge on managing private clouds based on OpenStack, finally troubleshooting and advanced, architectural topics are present. The goal of this course is to familiarize with the OpenStack ecosystem as well as to give a strong background for further expansion and refinement of the OpenStack clouds. The course comprises all topics necessary to accomplish the Certificate OpenStack Administrator exam. 75% of the course is based on hands-on workshop in the real OpenStack training environment. After the course participants get all the materials and training environment for self-study and feature/troubleshooting excercises.

Customization options

The full course is to be meant for at least 5 days. It could be shortened if some of the topics are not relevant for the customer. In case the participants are beginners to OpenStack (slower pace) it is recommended to expand the course for 6 days or remove some advanced topics. The course can be also extended with 1 more day when OVN topics can be presented.

Read more...

OpenStack and NFV (with OVN and OpenFlow)

 21 Hours

The course is a profound training on OpenStack networking. It starts with the introduction to OpenStack and its architecture, then clarifies core OpenStack projects as Identity service (Keystone), Image service (Glance), Compute service (Nova), Block storage (Cinder) in order to describe the surroundings of the networks in OpenStack and mainly focus on Networking project (Neutron). Virtual network infrastructure is described and based on the Open Virtual Network project, Open vSwitch and OpenFlow. The goal of the course is to understand basic operations and architecture of OpenStack as well as to familiarize participants with various networking technologies behind OpenStack, extending information about OVN and underlying flows, resources and tools.

Customization options

The training can be contracted to 2 days, focusing on core aspects relevant for the customer. The training can be also extended regarding administrative, design, networking and/or troubleshooting topics concerning OpenStack deployments. It is possible to describe other underlying SDN solutions like Linux Bridge or OvS.

Read more...

AI Awareness for Telecom

 14 Hours

AI is a collection of technologies for building intelligent systems capable of understanding data and the activities surrounding the data to make "intelligent decisions". For Telecom providers, building applications and services that make use of AI could open the door for improved operations and servicing in areas such as maintenance and network optimization.

In this course we examine the various technologies that make up AI and the skill sets required to put them to use. Throughout the course, we examine AI's specific applications within the Telecom industry.

Audience

  • Network engineers
  • Network operations personnel
  • Telecom technical managers

Format of the course

  • Part lecture, part discussion, hands-on exercises
Read more...

Blockchain for Telecom

7 Hours

In this instructor-led, live training in New Jersey, we examine the core principles behind Blockchain technology and gain an understanding of its overall architecture and functionality. Throughout the course, we examine Blockchain technology's specific applications within the Telecom industry. Scenarios include security, payment systems, and user verification.

Read more...

BSS (BUSINESS SUPPORT SYSTEM) for Telecom

 21 Hours

BSS Course Contents :
This course is primarily aimed at managers in Telecom operation who need to have 360
view of a) legacy BSS in eTOM b) emerging BSS in NGOSS c) Billing system including
mediation, rating and CDR in details. This course also introduces in new topics like
advanced big data based CRM, Churn management and Fraud Management.

Read more...

Cisco ASA/Pix Operation

 28 Hours

A 4 day instructor-led practical course designed to familiarise delegates with the Cisco ASA Firewall CLI and ASDM. The course details the key commands used to configure and secure networks using the ASA Firewall with v8 of the operating system and version 6 of the ASDM.

Delegates will configure the ASA using the console port, TFTP server, telnet and SSH using local and RADIUS authentication. The device will be configured to utilise Syslog and SNMP.

ASA Firewalls will also be configured to use Access-Lists, Network Address Translation and VPN's utilising IPSec protocols. The course will cover the theory of Public/Private Keys, shared secret keys and their use in forming Site to site VPN's between ASA Firewalls using IKE and IPSec. Students will configure the units to create site to site VPN's, remote access VPN's using the Cisco Secure VPN Client and Web VPN's. The course will cover the theory of failover and delegates will configure Active/Standby failover on the ASA.

Privileged commands and protocol analyser traces will be used, where necessary, to debug protocols and ensure proper operation of the ASA Firewall. Students will also perform password recovery operations.

This course will involve interfacing the ASA with other network equipment, such as routers and switches, as would be expected in a network environment.

Audience:

Course is suitable for anyone involved in ASA firewall configuration and network security

Course is approximately 50% practical

Read more...

DNS and BIND: Setting Up, Managing and Securing Your DNS Server

 14 Hours

In this instructor-led, live training in New Jersey, participants will learn the critical features of DNS while carrying out exercises in the setup and configuration of a BIND DNS server on Linux. The course starts with a refresher on key networking principles, then digs into hands-on practice with setup and configuration. Steadily, the discussion and practices move towards more complex topics such as security, availability, debugging and troubleshooting.

Read more...

HAProxy Administration

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at intermediate-level system administrators, network engineers, and DevOps professionals who wish to efficiently manage load balancing, proxying, and traffic optimization using HAProxy.

By the end of this training, participants will be able to:

  • Understand the fundamentals of load balancing and proxy servers.
  • Install, configure, and optimize HAProxy for various use cases.
  • Use advanced features like ACLs, HTTP header manipulation, and logging for enhanced control.
  • Monitor and troubleshoot HAProxy for maximum performance and reliability.
Read more...

Understanding IPSec VPNs

 14 Hours

This 2 day course investigates the theory and technology associated with IPSec VPN’s.VPN’s are setup using Cisco IOS Routers and ASA Firewalls using the web interface. The workings of the protocols are examined using debug commands and protocol analyser traces of relevant negotiations.

Audience:

Suitable for network planners, engineers or anyone interested in IPSec VPNs

Course is approximately 40% practical

Read more...

Understanding IPv6

 14 Hours

A 2 day theoretical course (with some practical demonstrations) covering the fundamentals of Internet Protocol v6 – including addressing, protocol formats, ICMP v6, discovery processes and IP v6 routing.

Audience:

Network Planners, Designers, and Engineers requiring an understanding of IP v6. Those requiring a comprehensive overview of IP v6 and the migration process from an IP v4 environment.

Read more...

Linux for Network Engineers

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at network engineers who wish to use Linux for network engineering.

By the end of this training, participants will be able to:

  • Set up Linux services for networking.
  • Replace switches with Linux switches.
  • Use Linux commands to manage processes.
  • Configure an SDN to automate network maintenance.
Read more...

Python for Network Engineers

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at network engineers who wish to maintain, manage, and design computer networks with Python.

By the end of this training, participants will be able to:

  • Optimize and leverage Paramiko, Netmiko, Napalm, Telnet, and pyntc for network automation with Python.
  • Master multi-threading and multiprocessing in network automation.
  • Use GNS3 and Python for network programming.
Read more...

ONAP for Network Orchestration and Automation

 28 Hours

In this instructor-led, live training in New Jersey (online or onsite), participants will learn how to use ONAP to automate networking services.

By the end of this training, participants will be able to:

  • Understand, install and configure the various components in the ONAP ecosystem.
  • Carry out real-time, policy-driven orchestration and automation of physical and virtual network functions.
  • Design, create, orchestrate, and monitor VNFs, SDNs and other network services.
  • Efficiently manage the entire networking lifecycle using a software-driven approach.
  • Develop, deploy, and scale a network using the latest open source technologies and practices.
Read more...

OpenStack for Telecom

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at engineers, architects and managers who wish to deploy an OpenStack cloud to manage their Telecom infrastructure.

By the end of this training, participants will be able to:

  • Plan, deploy, and administer OpenStack as a private cloud.
  • Understand IaaS architecture and its implementation under OpenStack.
  • Replace physical routers and servers with virtual machines running in a private cloud.
  • Reduce infrastructure and maintenance costs through virtualization and cloud computing.
  • Expedite the rollout of new services to customers.
Read more...

OSS ( Operation Support System ) for Telecom

 21 Hours

Introduction:

OSS/BSS is at the heart of operation of any Telecom operator. Given growth of Big Data in recent time,
area of OSS/BSS has undergone disruptive changes specially with virtualization of the OSS/BSS and given
the fact, many of the new OTT ( Over the top) services are newly developed web/mobile based services
that do not fit into legacy OSS. In this current course, which consists of 4 days, first 3 days are spent
extensively to develop background in legacy OSS/BSS, while last 5 modules, are dedicated to explain
emerging Big Data analytics application in OSS/BSS layer

Target Audience:

  • Telecom/Cellular Operation People
  • Telecom Sales professionals
  • Telecom Operation vendors/contractors
  • CXO, VP, Director level managers in TELECOM
Read more...

P4 Programming

 21 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at networking engineers and developers who wish to configure, execute and manage programmable networking resources using P4.

By the end of this training, participants will be able to:

  • Learn the fundamentals of the P4 language.
  • Program network devices.
  • Set up a server for traffic management.
  • Compile and execute a P4 program to control plane applications.
  • Manage network congestion using monitoring and debugging methods.
Read more...

Interconnecting Cisco Networking Devices: Accelerated (Pre-CCNA)

 1 Hours

This course introduces you to how to install, operate, configure, and verify a basic Internet Protocol version 4 (IPv4), including configuring a LAN switch, configuring an IP router, connecting to a WAN, and identifying basic security threats

This course will help you:

    Install, operate, configure, and verify a basic IPv4 network

    Perform basic troubleshooting steps in enterprise branch office

Format of the Course

  • Interactive lecture and discussion.
  • Lots of exercises and practice.
  • Hands-on implementation in a live-lab environment.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
Read more...

SAN and NAS Storage

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at network engineers who wish to converge storage infrastructures with SAN and NAS.

By the end of this training, participants will be able to:

  • Perform configurations of SAN and NAS storage on a storage system.
  • Connect to storage systems and devices from a client.
  • Compare SAN and NAS solutions for centralized storage.
Read more...

Software-Defined Networking

 28 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at system administrators, network engineers, and developers who wish to install, configure, and manage controllers, applications, and networking devices under an SDN.

By the end of this training, participants will be able to:

  • Set up a virtual network.
  • Create applications.
  • Use controllers to operate a software-defined network.
Read more...

Practical SIP Telephony

 21 Hours

The 3 day practical course covers the messages and call flows of the Session Initiation Protocol (SIP) and its use in voice networks. This course is a mixture of theory and practice (utilising protocol analyser traces where appropriate for explanation and troubleshooting) with practical VoIP configured using IP telephones, softphones, voice capable Cisco routers and SIP IP PBX,s (e.g. Trixbox).

Audience:

Network Planners, Designers, and Engineers requiring an understanding of SIP.

The course is around 40% practical.

Read more...

SIP protocol in VoIP

 21 Hours

The course consists of two complementary parts – a theoretical and a practical one. The first is a one day introduction covering motivation, philosophy, fundamentals and rules of operation of the SIP protocol and ways it is used to implement telecom services with focus on IP telephony and VoIP. The second two-day part enables participants to learn practical aspects of service operation within a framework of hand-on laboratory exercises giving detailed insight into configuration of components of SIP telephony architecture, SIP signalling at both message sequence chart and internal message structure levels, and assists in understanding of typical problems and troubleshooting including security and telecom fraud aspects. The trainers will share their experience in launching, operation and management of SIP telephony covering also virtualization and cloud based solutions. Practical part is presented using both SIP hardphones and softphones and IP telephony servers (Asterisk and Freeswitch). Participants can take advantage of the fact trainers have got rich technical and business experience in IP telephony and submit their own problems and questions. They will be included in the agenda at wrap-up as a supplement to the training to meet current urgent needs of clients. Training is addressed to participants with basic knowledge and experience in telecom services – specifically in VoIP and IP networking.

Read more...

Practical TCP/IP

 28 Hours

This 4 day course involves a mixture of expository based (utilising protocol analyser traces where appropriate) and practical experiments to test and verify the operation of TCP/IP networks. The major aspects of the TCP/IP protocol stack are covered, including subnetting, supernetting and running dynamic routing protocols. TCP and UDP will be compared and contrasted, covering the end-to-end reliability and congestion avoidance capabilities of the TCP/IP stack. Some application layer protocols (HTTP, TLS, DNS, DHCP etc) will be investigated during the course. Network security in the form of TLS will be covered both from a theoretical and practical standpoint. The practical exercises are designed to augment the theory and enhance both the understanding of the underlying protocols and also the problem solving abilities of the delegates.

Audience:

Suitable for anyone looking for an understanding of TCP/IP.

Course is approximately 50% practical.

Read more...

Understanding Modern Information Communications Technology

 7 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at beginner-level to intermediate-level IT professionals who wish to understand the basics and principles of modern information and communication technologies and their applications.

By the end of this training, participants will be able to:

  • Explain the main components and functions of the internet architecture and how they interact.
  • Describe the features and benefits of modern network solutions and implementations, such as fiber technology, clustering, and internet of things.
  • Understand the concepts and models of cloud computing and its services, such as infrastructure as a service and virtualization.
  • Identify the future trends and directions of information and communication technologies and their implications.
Read more...

Varnish: Speeding Up Your Website with HTTP Reverse Proxy Caching

 7 Hours

Varnish is a reverse proxy for content-heavy dynamic web sites. Unlike Squid, which was originally a client-side cache, or Apache and nginx, which are web servers, Varnish was designed as an HTTP accelerator. Varnish is focused exclusively on HTTP, unlike other proxy servers that support FTP, SMTP and other network protocols. Varnish is used by Wikipedia, The New York Times, Facebook and Twitter, among other high-profile websites.

In this course, participants will learn about Varnish's features and caching approach while practicing in the setup and configuration of a Varnish proxy on Linux. The course starts with a refresher on key networking principles, then digs into setup and configuration topics and moves steadily towards complex implementations. By the end of the training participants will understand when and where it makes sense to deploy Varnish and will have the necessary practice to deploy their own Varnish proxy solutions.

Audience

  • Network technicians
  • Network designers
  • System administrators

Format of the course

  • Part lecture, part discussion, heavy hands-on practice and implementation, occasional quizing to measure progress
Read more...

VoIP with Cisco CallManager Express

 35 Hours

VoIP (Voice over Internet Protocol) is a technology that makes it possible for users to make voice calls over an Internet connection instead of through a regular phone line.

In this instructor-led, live training, participants will learn how to set up a VoIP system using Cisco CallManager Express.

By the end of this training, participants will be able to:

  • Understand fundamental VoIP concepts
  • Learn how to use VoIP equipment
  • Configure CISCO routers for VoIP
  • Implement VoIP and CallManager Express into their network
  • Configure CME features for SIP, SCCP, and soft phones
  • Work with advanced configuration settings and features of CME

Audience

  • Managers
  • System administrators
  • Software and support system developers
  • Technicians
  • Network engineers

Format of the course

  • Part lecture, part discussion, exercises and heavy hands-on practice
Read more...

Practical Voice and Video over IP

 21 Hours

The 3 day practical course covers the fundamentals of the various voice protocols used to carry voice (and video) over a packet switched network. This course is a mixture of theory and practice (utilising Wireshark where appropriate for explanation and troubleshooting) with practical VoIP configured using IP telephones, softphones and voice capable Cisco routers. This is primarily a 'generic' VoIP course – but uses Cisco equipment to provide an IP backbone and voice gateways. We can also provide Cisco specific voice training courses. The course also covers call setup between circuit switched and packet switched networks.

The course is approximately 40% practical.

Read more...

Wireless Network and Telecom Network Security

 35 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at technical persons who wish to apply the most suitable tools and techniques to secure both telecom as well as wireless networks.

Read more...

OpenStack Security

 14 Hours

The course is providing practical knowledge on OpenStack and private cloud security. It starts from the introduction to the system, then the participants are getting practical knowledge on security in private clouds and securing OpenStack installation. During the course, each of the core OpenStack modules is presented, participants are building up virtual identity, image, network, compute and storage resources while discussing relevant security topics. Each participant is getting their own training environment with a complete OpenStack installation based on selected cloud architecture (eg. storage, networking). The training could be highly customized based on the needs of the client.

Customization options
The training can be contracted to 2 days, focusing on core aspects relevant for the customer. The training can be also extended regarding administrative, design, networking and/or troubleshooting topics concerning OpenStack deployments
 

Read more...

Last Updated:

Testimonials (21)

He is very creative and He likes for us to have good questions.

Marius

Course - Data Communications Networks - Theory and Practice

Quality of explanation of program operation and analysis of various cases.

Krzysztof - Centrum Informatyki Resortu Finansow

Course - Network Troubleshooting with Wireshark

Experience of the trainor and interaction

Michael Angelo - Metropolitan Bank and Trust Company

Course - Cisco CCNA Syllabus in 5 Days

trainer listen to participants

Bartosz - ATOS PGS sp. z o.o.

Course - Advanced Network Troubleshooting Using Wireshark

He explained everything, not only k8s notions.

Stefan Voinea - EMAG IT Research S.R.L

Course - Certified Kubernetes Application Developer (CKAD) - exam preparation

The clarity with which it was presented

John McLemore - Motorola Solutions

Course - Deep Learning for Telecom (with Python)

the way the trainer used to explain by drawing diagrams and not just going through the slides and reading from it.

Ibrahim Ghassal - Saudi Airlines

Course - CompTIA Network +

The trainer was extremely knowledgable and helpful. While walking through the exercises, I wasn't rushed and was allowed to make mistakes (to a point) and then help was given to correct to them where needed.

Tim Wilkes - Gamma

Course - OpenStack Security

Depth of knowledge of the trainer

Grant Miller - BMW

Course - Certified Kubernetes Administrator (CKA) - exam preparation

The labs are more interesting as we get to run, create and learn the different commands.

Derrick Mahlangu - Netcampus

Course - SAN and NAS Storage

Information about new application and updates from cisco

Muhammad Al-Hafidzi - Unit4 Business Software Holding B.V.

Course - Cisco ASA/Pix Operation

communication, knowledge from experience, solve problems,

Marcin Walewski - Intel Technology Poland Sp. z o.o.

Course - OpenStack Bootcamp

good knowledge of technical issues, very detailed explanation of topics

Marcin Brzozowski - Asseco Business Solutions S.A.

Course - Deploying a Cisco SD-WAN

Trainer knows very well the subject. He try to give a lot of examples in order that we understand "how" it is working. He answer to all questions raised. Very available.

christel salve - BICS

Course - Blockchain for Telecom

The varied topics

Daniel Lindh - Tele 2 Sverige AB

Course - OpenStack for Telecom

To get a better understanding about OpenStack.

Jan Gustafsson - Polystar OSIX

Course - OpenStack Architecture and Troubleshooting

Trainer is well prepared and dedicated in making us understand. Well done.

Alan Lye - SBS Transit Ltd

Course - Basic Network Troubleshooting Using Wireshark

His huge amount of knowledge.

Mirela Ochia - Deutsche Telekom Pan-Net Romania S.R.L.

Course - Practical SIP Telephony

I really liked the rapport and connection that the trainer was able to achieve with the class. And that, on the fly, he was able to shape the class into the things we needed.

Fredrik Lindlof - Svenska Spel AB

Course - HAProxy Administration

The course build up the whole picture and helped me understand in depth how to deal with everyday tasks I perform with Tenable Census Manager.

Konstantinos Papadopoulos

Course - Nessus Manager

Hands on and setup were nicely done and practical knowledge thoroughly imparted. Trainer was really helpful throughout.

B Kishore

Course - SIP protocol in VoIP

Upcoming Courses

AI Awareness for Telecom

2025-09-08 9:30 am
14 hours
Totowa, NJ – Regus at Riverview Drive
$ 2703 (Online)
$ 2703 (Classroom)

ONOS Fundamentals: Deploying Scalable SDN Solutions

2025-09-22 9:30 am
14 hours
Princeton, NJ – Regus at Overlook Business Center
$ 2703 (Online)
$ 2703 (Classroom)

GNS3 for Cisco Certification (CCNA/CCNP)

2025-10-06 9:30 am
21 hours
Totowa, NJ – Regus at Riverview Drive
$ 4054 (Online)
$ 4054 (Classroom)

HAProxy Administration

2025-10-20 9:30 am
14 hours
Princeton, NJ – Regus at Overlook Business Center
$ 2703 (Online)
$ 2703 (Classroom)

OpenStack Bootcamp

2025-11-03 9:30 am
28 hours
Totowa, NJ – Regus at Riverview Drive
$ 5405 (Online)
$ 5405 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries
Online Networking training in New Jersey, Networking training courses in New Jersey, Weekend Networking courses in New Jersey, Evening Networking training in New Jersey, Networking instructor-led in New Jersey, Networking instructor in New Jersey, Networking one on one training in New Jersey, Networking coaching in New Jersey, Networking on-site in New Jersey, Networking instructor-led in New Jersey, Networking trainer in New Jersey, Networking private courses in New Jersey, Networking boot camp in New Jersey, Networking classes in New Jersey, Evening Networking courses in New Jersey, Weekend Networking training in New Jersey, Online Networking training in New Jersey