Online or onsite, instructor-led live Networking training courses demonstrate through interactive discussion and hands-on practice the fundamentals and advanced topics of Networking.
Networking training is available as "online live training" or "onsite live training". Online live training (aka "remote live training") is carried out by way of an interactive, remote desktop. Onsite live Networking training can be carried out locally on customer premises in Vermont or in NobleProg corporate training centers in Vermont.
NobleProg -- Your Local Training Provider.
Burlington, VT – Regus at Williston
300 Interstate Corporate Center, Suite 200, Burlington, United States, 05495
The venue is located in suburban Williston’s Interstate Corporate Center, accessible by car via US 2 or I‑89 with free on-site parking available. From Burlington International Airport (BTV), only about 5 miles away, taxis or rideshares take approximately 10 minutes via Williston Road. Public transit is served by Green Mountain Transit Route 2A, with a stop right outside the corporate center, offering convenient access for attendees traveling without a car.
Montpelier, VT – Local 64
43 State Street, 2ndFloor, Montpelier, United States, 05602
The venue is located at 43 State Street, on the second floor west side, right in downtown Montpelier near the Vermont State House. Easily reached by car via I‑89 or US 2, there is nearby metered street parking and municipal lots. From Burlington International Airport (BTV), about 36 miles northwest, taxis or rideshares typically take around 45 minutes south via I‑89. Public transit is available via Green Mountain Transit buses stopping on State or Main Street, placing the center within a short walk for those arriving without a car.
Winooski, VT – MyCube at Champlain Mill
20 Winooski Falls Wy, Suite 302, Winooski, United States, 05404
The venue is located in the historic Champlain Mill on Winooski Falls Way, perched above scenic Winooski Falls, easily accessed by car via I‑89 or US 2, with free on-site parking available. From Burlington International Airport (BTV), around 3 miles east, taxis or rideshares take about 10–15 minutes via Williston Road. Public transit is facilitated by Green Mountain Transit routes 2 and 4, which stop nearby on Riverside Avenue and Church Street—only a short walk to the site.
Network Synchronization — OSA 5421 and FSP Network Manager (FSP NM) provides a focused introduction to both the OSA 5421 platform and the FSP NM management system, covering their roles in delivering precise synchronization across packet and circuit-based networks.
This instructor-led, live training (online or onsite) is aimed at intermediate-level network and synchronization engineers who wish to deploy, configure, monitor, and troubleshoot OSA 5421 and FSP NM-based synchronization solutions.
Upon completion of this training, participants will be able to:
Explain synchronization principles and the role of OSA 5421 and FSP NM in mobile and transport networks.
Describe the hardware and software architecture of OSA 5421.
Configure primary interfaces and timing sources including SyncE and PTP.
Apply monitoring and KPI techniques within FSP NM to maintain synchronization performance.
Troubleshoot common synchronization faults and design resilient timing architectures.
Format of the Course
Interactive lecture and discussion.
Hands-on configuration and lab exercises.
Real-world case studies and troubleshooting scenarios.
Course Customization Options
To request a customized training for this course, please contact us to arrange.
IP RAN Router is a networking device and logical element used to aggregate, route, and manage IP traffic between radio access network elements and core network functions.
This instructor-led, live training (online or onsite) is aimed at intermediate-level network engineers and RAN specialists who wish to deploy, configure, and troubleshoot IP RAN routing solutions.
Upon completion of this training, participants will be able to:
Describe the role and architecture of IP RAN routers within mobile networks.
Configure core interfaces and basic routing for RAN connectivity.
Implement routing protocols used in RAN environments, including OSPF and BGP.
Apply QoS and traffic engineering principles to prioritize RAN traffic.
Troubleshoot common deployment and operational issues.
Format of the Course
Interactive lecture and discussion.
Hands-on configuration exercises and labs.
Real-world case studies and troubleshooting scenarios.
Course Customization Options
To request a customized training for this course, please contact us to arrange.
GNS3 is a flexible network simulation tool that supports integration with automation frameworks, container-based services, and cloud environments for advanced lab setups.
This instructor-led, live training (online or onsite) is aimed at advanced-level networking professionals who wish to automate, containerize, and scale their GNS3 labs with real-world architectures involving hybrid and multi-cloud platforms.
By the end of this training, participants will be able to:
Automate network tasks using Python scripts and Ansible in GNS3 environments.
Deploy Docker containers inside GNS3 to simulate network services and endpoints.
Integrate GNS3 with cloud platforms such as AWS and Azure for hybrid lab environments.
Design advanced, scalable topologies for multi-vendor testing and continuous integration.
Format of the Course
Interactive lecture and discussion.
Hands-on lab configuration using live GNS3 topologies.
Integration exercises with automation and container orchestration tools.
Course Customization Options
To request a customized training for this course, please contact us to arrange.
GNS3 is a powerful network simulation platform that enables professionals to build, test, and validate complex network designs in a virtualized environment.
This instructor-led, live training (online or onsite) is aimed at intermediate-level to advanced-level IT professionals who wish to use GNS3 for network planning, testing, and production environment replication.
By the end of this training, participants will be able to:
Design and simulate enterprise-grade network architectures using GNS3.
Replicate production environments for safe testing and change validation.
Integrate real operating systems and services into GNS3 topologies.
Use GNS3 for troubleshooting, documentation, and client demos.
Format of the Course
Interactive lecture and discussion.
Realistic network simulations and hands-on labs.
Project-based exercises focused on design and testing use cases.
Course Customization Options
To request a customized training for this course, please contact us to arrange.
This instructor-led, live training in Vermont (online or onsite) is aimed at intermediate-level networking professionals who wish to prepare for Cisco CCNA or CCNP certifications using GNS3 to simulate Cisco devices and build exam-aligned topologies.
By the end of this training, participants will be able to:
Install and configure GNS3 for Cisco certification lab environments.
Import and manage Cisco IOS images for routers and switches.
Build and test topologies aligned with CCNA and CCNP exam objectives.
Practice real-world routing, switching, and troubleshooting scenarios.
This instructor-led, live training in Vermont (online or onsite) is aimed at intermediate-level IT architects, network administrators, and engineers who wish to deploy OpenDaylight in production environments, optimize its performance for large-scale use, and troubleshoot common issues in SDN deployments.
By the end of this training, participants will be able to:
Deploy OpenDaylight in production environments for scalable SDN solutions.
Optimize the performance of OpenDaylight deployments to handle high traffic volumes.
Troubleshoot and resolve common issues in SDN deployments.
Monitor and maintain OpenDaylight environments for long-term stability.
Scale OpenDaylight deployments to meet growing network demands.
This instructor-led, live training in Vermont (online or onsite) is aimed at intermediate-level SDN developers and software engineers who wish to learn how to build custom SDN applications using OpenDaylight APIs and YANG models to enhance network functionality and scalability.
By the end of this training, participants will be able to:
Understand the architecture and components of OpenDaylight.
Use OpenDaylight APIs to build SDN applications.
Create and manage YANG models for network customization.
Deploy, test, and debug custom applications in an OpenDaylight environment.
Integrate OpenDaylight with external systems and network devices.
Fiber optics is a high-speed communication technology that transmits data using light signals through thin strands of glass or plastic fibers.
This instructor-led, live training (online or onsite) is aimed at intermediate-level IT professionals and technicians who wish to understand fiber optic systems, perform measurements, and apply best practices for installation and maintenance.
By the end of this training, participants will be able to:
Understand the principles and advantages of fiber optic communication.
Identify different types of fiber cables, connectors, and splicing methods.
Use key optical measurement instruments such as OTDR and fusion splicers.
Perform basic troubleshooting, testing, and documentation of optical networks.
Format of the Course
Interactive lecture and discussion.
Practical demonstrations and instrument handling.
Hands-on exercises in a live-lab environment.
Course Customization Options
To request a customized training for this course, please contact us to arrange.
This instructor-led, live training in Vermont (online or onsite) is aimed at beginner-level networking professionals who wish to learn how to use GNS3 to simulate basic networks and gain hands-on lab experience for certification and practical knowledge.
By the end of this training, participants will be able to:
Install and configure GNS3 on their local system.
Understand and use the GNS3 graphical interface and topology builder.
Create and test basic network topologies with routers, switches, and PCs.
Integrate GNS3 with tools like Wireshark for packet analysis.
This instructor-led, live training in Vermont (online or onsite) is aimed at intermediate-level IT architects and network managers who wish to deploy and optimize ONOS in production environments, ensuring scalability, performance, and reliability.
By the end of this training, participants will be able to:
Understand the architecture and core features of ONOS for production use.
Deploy ONOS in a production environment using best practices.
Configure clustering, redundancy, and fault tolerance in ONOS.
Monitor, troubleshoot, and optimize ONOS deployments for scalability and performance.
Integrate ONOS with existing network infrastructure and tools.
Plan and execute a successful ONOS upgrade process.
This instructor-led, live training in Vermont (online or onsite) is aimed at intermediate-level SDN developers and network engineers who wish to develop custom applications on the ONOS platform to address specific network challenges and enhance SDN capabilities.
By the end of this training, participants will be able to:
Understand the architecture and core components of ONOS.
Set up a development environment for ONOS applications.
Create, test, and deploy ONOS applications for managing SDN networks.
Integrate ONOS applications with external systems and APIs.
Troubleshoot and optimize ONOS applications for performance and scalability.
This instructor-led, live training in Vermont (online or onsite) is aimed at intermediate-level network engineers who wish to gain the skills needed to design, install, and maintain fiber optic networks.
By the end of this training, participants will be able to:
Understand the fundamentals of fiber optic technology.
Apply network design principles for point-to-point and FTTH networks.
Install and maintain fiber optic cables and connectors.
This instructor-led, live training in Vermont (online or onsite) is aimed at intermediate-level network engineers and DevOps teams who wish to deploy, configure, and manage SDN solutions using the OpenDaylight platform.
By the end of this training, participants will be able to:
Understand OpenDaylight's architecture, components, and role in SDN ecosystems.
Install and configure OpenDaylight for various network scenarios.
Develop and deploy network flows using OpenDaylight controllers.
Integrate OpenDaylight with SDN-enabled devices and existing networks.
Troubleshoot and optimize OpenDaylight deployments for real-world use cases.
This instructor-led, live training in Vermont (online or onsite) is aimed at intermediate-level to advanced-level database administrators, network engineers, and IT professionals who wish to optimize database performance, scalability, and reliability using Spine-Leaf architecture with VXLAN.
By the end of this training, participants will be able to:
Understand the Spine-Leaf network topology and its benefits.
Implement VXLAN for scalable and efficient database networking.
Optimize database workloads across distributed data center environments.
Deploy Spine-Leaf architecture in cloud and on-premises data centers.
Enhance network security, redundancy, and fault tolerance for database environments.
Automate network configurations for database management using Python and Ansible.
This instructor-led, live training in Vermont (online or onsite) is aimed at intermediate-level to advanced-level networking professionals who wish to expand their expertise in advanced networking practices using Linux.
By the end of this training, participants will be able to:
Implement advanced networking protocols and configurations under Linux.
Configure and manage Virtual Private Networks (VPNs).
Set up and secure firewalls for a robust network security setup.
Monitor and troubleshoot network performance issues.
This instructor-led, live training in Vermont (online or onsite) is aimed at intermediate-level network engineers who wish to use, maintain, and troubleshoot microwave networks effectively.
By the end of this training, participants will be able to:
Understand the principles and operation of microwave communication systems.
Design and implement point-to-point and point-to-multipoint microwave links.
Perform link budget analysis and network planning.
Operate, maintain, and troubleshoot microwave networks effectively.
This instructor-led, live training in Vermont (online or onsite) is aimed at intermediate-level network engineers, DevOps teams, and SDN developers who wish to understand and manage SDN environments using ONOS effectively.
By the end of this training, participants will be able to:
Understand the architecture and components of ONOS.
Install and configure ONOS in a lab environment.
Explore the capabilities of ONOS for managing SDN environments.
Deploy, manage, and troubleshoot SDN networks using ONOS.
This instructor-led, live training in Vermont (online or onsite) is aimed at beginner-level network engineers and IT administrators who wish to learn fundamental OpenDaylight concepts, understand its role in network automation, and begin automating network configurations and operations.
By the end of this training, participants will be able to:
Understand the role of OpenDaylight in software-defined networking (SDN).
Install and configure OpenDaylight on a Linux-based system.
Explore the OpenDaylight architecture and core features.
Create basic automated network configurations using OpenDaylight.
Monitor and manage networks using OpenDaylight controllers.
This instructor-led, live training in Vermont (online or onsite) is aimed at anyone who wish to understand and implement a network and various types of servers under Linux.
By the end of this training, participants will be able to:
Understand how networking works under Linux.
Set up a sample LAN.
Understand the various protocols used on the internet and implement each one under Linux.
Secure a networking and various types of servers, such as a webs server.
This instructor-led, live training in Vermont (online or onsite) is aimed at beginner-level networking professionals and IT administrators who wish to understand the foundational concepts of ONOS, its architecture, and its deployment for scalable SDN solutions.
By the end of this training, participants will be able to:
Understand the role of ONOS in software-defined networking (SDN).
Describe the architecture and core components of ONOS.
Install and configure ONOS on a Linux-based system.
Set up a basic SDN network using ONOS.
Explore ONOS features for managing and scaling network infrastructure.
This instructor-led, live training in Vermont (online or onsite) is aimed at beginner-level network engineers and IT professionals who wish to gain a foundational understanding of SDN concepts, learn about the architecture of OpenDaylight, and perform basic installation and configuration tasks.
By the end of this training, participants will be able to:
Understand the principles and benefits of software-defined networking (SDN).
Explore the architecture and components of OpenDaylight.
Install and configure OpenDaylight on a Linux system.
Integrate OpenDaylight with networking devices.
Execute basic OpenDaylight operations and commands.
This instructor-led, live training in Vermont (online or onsite) is aimed at intermediate-level telecommunications engineers who wish to gain the knowledge and skills necessary to design, implement, and maintain telecommunication networks with a focus on link integration, ensuring seamless communication and data transfer across networks.
By the end of this training, participants will be able to:
Understand the fundamentals of telecommunication networks.
In this instructor-led, live training in Vermont, participants will learn how to implement deep learning models for telecom using Python as they step through the creation of a deep learning credit risk model.
By the end of this training, participants will be able to:
Understand the fundamental concepts of deep learning.
Learn the applications and uses of deep learning in telecom.
Use Python, Keras, and TensorFlow to create deep learning models for telecom.
Build their own deep learning customer churn prediction model using Python.
The aim of this course is twofold - gain solid knowledge about OpenStack architecture and acquire profound troubleshooting skills. In the architecture part you will learn how to design the hardware for the public and private cloud, prepare high-availability control plane, choose proper size of the flavours, and safely overcommit cloud resources, among other things. Getting knowledge about the internals of Neutron (Networking Service) is another essential part in OpenStack architecture. Next the participant will be introduced into methods of troubleshooting issues in OpenStack clusters starting from general tips, through network troubleshooting up to caveats of main OpenStack services. Around 75% of the course comprises of hands-on workshops in the real OpenStack training environment.
The course is a comprehensive training on OpenStack. It starts with the introduction to the system, then through hands-on workshops it gives practical knowledge on managing private clouds based on OpenStack, finally troubleshooting and advanced, architectural topics are present. The goal of this course is to familiarize with the OpenStack ecosystem as well as to give a strong background for further expansion and refinement of the OpenStack clouds. The course comprises all topics necessary to accomplish the Certificate OpenStack Administrator exam. 75% of the course is based on hands-on workshop in the real OpenStack training environment.
The course is a comprehensive training on OpenStack, extended version of the OpenStack Bootcamp course includes extra excercises, troubleshooting and sample examination tasks. Extended content is highlited in bold in the course outline. It starts with the introduction to the system, then through hands-on workshops it gives practical knowledge on managing private clouds based on OpenStack, finally troubleshooting and advanced, architectural topics are present. The goal of this course is to familiarize with the OpenStack ecosystem as well as to give a strong background for further expansion and refinement of the OpenStack clouds. The course comprises all topics necessary to accomplish the Certificate OpenStack Administrator exam. 75% of the course is based on hands-on workshop in the real OpenStack training environment. After the course participants get all the materials and training environment for self-study and feature/troubleshooting excercises.
Customization options
The full course is to be meant for at least 5 days. It could be shortened if some of the topics are not relevant for the customer. In case the participants are beginners to OpenStack (slower pace) it is recommended to expand the course for 6 days or remove some advanced topics. The course can be also extended with 1 more day when OVN topics can be presented.
The course is a profound training on OpenStack networking. It starts with the introduction to OpenStack and its architecture, then clarifies core OpenStack projects as Identity service (Keystone), Image service (Glance), Compute service (Nova), Block storage (Cinder) in order to describe the surroundings of the networks in OpenStack and mainly focus on Networking project (Neutron). Virtual network infrastructure is described and based on the Open Virtual Network project, Open vSwitch and OpenFlow. The goal of the course is to understand basic operations and architecture of OpenStack as well as to familiarize participants with various networking technologies behind OpenStack, extending information about OVN and underlying flows, resources and tools.
Customization options
The training can be contracted to 2 days, focusing on core aspects relevant for the customer. The training can be also extended regarding administrative, design, networking and/or troubleshooting topics concerning OpenStack deployments. It is possible to describe other underlying SDN solutions like Linux Bridge or OvS.
AI is a collection of technologies for building intelligent systems capable of understanding data and the activities surrounding the data to make "intelligent decisions". For Telecom providers, building applications and services that make use of AI could open the door for improved operations and servicing in areas such as maintenance and network optimization.
In this course we examine the various technologies that make up AI and the skill sets required to put them to use. Throughout the course, we examine AI's specific applications within the Telecom industry.
In this instructor-led, live training in Vermont, we examine the core principles behind Blockchain technology and gain an understanding of its overall architecture and functionality. Throughout the course, we examine Blockchain technology's specific applications within the Telecom industry. Scenarios include security, payment systems, and user verification.
A 4 day instructor-led practical course designed to familiarise delegates with the Cisco ASA Firewall CLI and ASDM. The course details the key commands used to configure and secure networks using the ASA Firewall with v8 of the operating system and version 6 of the ASDM.
Delegates will configure the ASA using the console port, TFTP server, telnet and SSH using local and RADIUS authentication. The device will be configured to utilise Syslog and SNMP.
ASA Firewalls will also be configured to use Access-Lists, Network Address Translation and VPN's utilising IPSec protocols. The course will cover the theory of Public/Private Keys, shared secret keys and their use in forming Site to site VPN's between ASA Firewalls using IKE and IPSec. Students will configure the units to create site to site VPN's, remote access VPN's using the Cisco Secure VPN Client and Web VPN's. The course will cover the theory of failover and delegates will configure Active/Standby failover on the ASA.
Privileged commands and protocol analyser traces will be used, where necessary, to debug protocols and ensure proper operation of the ASA Firewall. Students will also perform password recovery operations.
This course will involve interfacing the ASA with other network equipment, such as routers and switches, as would be expected in a network environment.
Audience:
Course is suitable for anyone involved in ASA firewall configuration and network security
In this instructor-led, live training in Vermont, participants will learn the critical features of DNS while carrying out exercises in the setup and configuration of a BIND DNS server on Linux. The course starts with a refresher on key networking principles, then digs into hands-on practice with setup and configuration. Steadily, the discussion and practices move towards more complex topics such as security, availability, debugging and troubleshooting.
This instructor-led, live training in Vermont (online or onsite) is aimed at beginner-level / intermediate-level OT technicians and network support staff who wish to use practical fiber diagnostic tools to identify common fiber faults and confirm when contractor support is needed.
By the end of this training, participants will be able to: inspect connectors safely, measure optical loss, locate likely breaks or bends, and document issues for escalation.
This instructor-led, live training in Vermont (online or onsite) is aimed at intermediate-level system administrators, network engineers, and DevOps professionals who wish to efficiently manage load balancing, proxying, and traffic optimization using HAProxy.
By the end of this training, participants will be able to:
Understand the fundamentals of load balancing and proxy servers.
Install, configure, and optimize HAProxy for various use cases.
Use advanced features like ACLs, HTTP header manipulation, and logging for enhanced control.
Monitor and troubleshoot HAProxy for maximum performance and reliability.
This 2 day course investigates the theory and technology associated with IPSec VPN’s.VPN’s are setup using Cisco IOS Routers and ASA Firewalls using the web interface. The workings of the protocols are examined using debug commands and protocol analyser traces of relevant negotiations.
Audience:
Suitable for network planners, engineers or anyone interested in IPSec VPNs
A 2 day theoretical course (with some practical demonstrations) covering the fundamentals of Internet Protocol v6 – including addressing, protocol formats, ICMP v6, discovery processes and IP v6 routing.
Audience:
Network Planners, Designers, and Engineers requiring an understanding of IP v6. Those requiring a comprehensive overview of IP v6 and the migration process from an IP v4 environment.
This instructor-led, live training in Vermont (online or onsite) is aimed at network engineers who wish to maintain, manage, and design computer networks with Python.
By the end of this training, participants will be able to:
Optimize and leverage Paramiko, Netmiko, Napalm, Telnet, and pyntc for network automation with Python.
Master multi-threading and multiprocessing in network automation.
This instructor-led, live training in Vermont (online or onsite) is aimed at engineers, architects and managers who wish to deploy an OpenStack cloud to manage their Telecom infrastructure.
By the end of this training, participants will be able to:
Plan, deploy, and administer OpenStack as a private cloud.
Understand IaaS architecture and its implementation under OpenStack.
Replace physical routers and servers with virtual machines running in a private cloud.
Reduce infrastructure and maintenance costs through virtualization and cloud computing.
Expedite the rollout of new services to customers.
This instructor-led, live training in Vermont (online or onsite) is aimed at networking engineers and developers who wish to configure, execute and manage programmable networking resources using P4.
By the end of this training, participants will be able to:
Learn the fundamentals of the P4 language.
Program network devices.
Set up a server for traffic management.
Compile and execute a P4 program to control plane applications.
Manage network congestion using monitoring and debugging methods.
This course introduces you to how to install, operate, configure, and verify a basic Internet Protocol version 4 (IPv4), including configuring a LAN switch, configuring an IP router, connecting to a WAN, and identifying basic security threats
This course will help you:
Install, operate, configure, and verify a basic IPv4 network
Perform basic troubleshooting steps in enterprise branch office
Format of the Course
Interactive lecture and discussion.
Lots of exercises and practice.
Hands-on implementation in a live-lab environment.
Course Customization Options
To request a customized training for this course, please contact us to arrange.
This instructor-led, live training in Vermont (online or onsite) is aimed at network engineers who wish to converge storage infrastructures with SAN and NAS.
By the end of this training, participants will be able to:
Perform configurations of SAN and NAS storage on a storage system.
Connect to storage systems and devices from a client.
Compare SAN and NAS solutions for centralized storage.
This instructor-led, live training in Vermont (online or onsite) is aimed at system administrators, network engineers, and developers who wish to install, configure, and manage controllers, applications, and networking devices under an SDN.
By the end of this training, participants will be able to:
Set up a virtual network.
Create applications.
Use controllers to operate a software-defined network.
The 3-day practical course focuses on the messaging and call flows of the Session Initiation Protocol (SIP) and its application within voice networks. It combines theoretical concepts with hands-on practice, using protocol analyzer traces to support explanation and troubleshooting. Participants will also work with real VoIP configurations, including IP telephones, softphones, voice-enabled Cisco routers, and SIP-based IP PBX systems such as Trixbox.
Audience
This course is intended for Network Planners, Designers, and Engineers who require a solid understanding of SIP and its role in modern voice communications.
The training is designed with a strong practical focus, with approximately 40% of the course dedicated to hands-on exercises and real-world scenarios.
This 4 day course involves a mixture of expository based (utilising protocol analyser traces where appropriate) and practical experiments to test and verify the operation of TCP/IP networks. The major aspects of the TCP/IP protocol stack are covered, including subnetting, supernetting and running dynamic routing protocols. TCP and UDP will be compared and contrasted, covering the end-to-end reliability and congestion avoidance capabilities of the TCP/IP stack. Some application layer protocols (HTTP, TLS, DNS, DHCP etc) will be investigated during the course. Network security in the form of TLS will be covered both from a theoretical and practical standpoint. The practical exercises are designed to augment the theory and enhance both the understanding of the underlying protocols and also the problem solving abilities of the delegates.
Audience:
Suitable for anyone looking for an understanding of TCP/IP.
This instructor-led, live training (online or onsite) is aimed at beginner-level and intermediate-level telecom engineers and field professionals who wish to use structured deployment methodologies and industry best practices to successfully install, supervise, integrate, and manage multi-vendor wireless networks from 2G to 5G across operator and enterprise environments.
By the end of this training, participants will be able to:
• Install and configure multi-vendor BTS systems (Huawei, ZTE, Ericsson) from 2G to 5G.
• Supervise site deployment activities and coordinate RF, transmission, power, civil, and core network teams during integration.
• Prepare telecom sites for ATP (Acceptance Test Procedure) and manage operator handover processes.
• Monitor wireless KPIs and manage cluster-based and region-based network operations within commercial and technical reporting structures.
This instructor-led, live training in Vermont (online or onsite) is aimed at beginner-level to intermediate-level IT professionals who wish to understand the basics and principles of modern information and communication technologies and their applications.
By the end of this training, participants will be able to:
Explain the main components and functions of the internet architecture and how they interact.
Describe the features and benefits of modern network solutions and implementations, such as fiber technology, clustering, and internet of things.
Understand the concepts and models of cloud computing and its services, such as infrastructure as a service and virtualization.
Identify the future trends and directions of information and communication technologies and their implications.
VoIP (Voice over Internet Protocol) is a technology that makes it possible for users to make voice calls over an Internet connection instead of through a regular phone line.
In this instructor-led, live training, participants will learn how to set up a VoIP system using Cisco CallManager Express.
By the end of this training, participants will be able to:
Understand fundamental VoIP concepts
Learn how to use VoIP equipment
Configure CISCO routers for VoIP
Implement VoIP and CallManager Express into their network
Configure CME features for SIP, SCCP, and soft phones
Work with advanced configuration settings and features of CME
Audience
Managers
System administrators
Software and support system developers
Technicians
Network engineers
Format of the course
Part lecture, part discussion, exercises and heavy hands-on practice
This instructor-led, live training in Vermont (online or onsite) is aimed at technical persons who wish to apply the most suitable tools and techniques to secure both telecom as well as wireless networks.
The course is providing practical knowledge on OpenStack and private cloud security. It starts from the introduction to the system, then the participants are getting practical knowledge on security in private clouds and securing OpenStack installation. During the course, each of the core OpenStack modules is presented, participants are building up virtual identity, image, network, compute and storage resources while discussing relevant security topics. Each participant is getting their own training environment with a complete OpenStack installation based on selected cloud architecture (eg. storage, networking). The training could be highly customized based on the needs of the client.
Customization options The training can be contracted to 2 days, focusing on core aspects relevant for the customer. The training can be also extended regarding administrative, design, networking and/or troubleshooting topics concerning OpenStack deployments
Read more...
Last Updated:
Testimonials (10)
the training on the job mode
PIERANDREA LAMBERTINI - Istituto Europeo di Oncologia Srl
Course - HAProxy Administration
The laboratory tool and the knowledge of trainer about network solutions
Online Networking training in Vermont, Networking training courses in Vermont, Weekend Networking courses in Vermont, Evening Networking training in Vermont, Networking instructor-led in Vermont, Networking trainer in Vermont, Networking on-site in Vermont, Networking one on one training in Vermont, Networking instructor in Vermont, Online Networking training in Vermont, Evening Networking courses in Vermont, Networking private courses in Vermont, Networking classes in Vermont, Networking instructor-led in Vermont, Networking coaching in Vermont, Networking boot camp in Vermont, Weekend Networking training in Vermont
