Get in Touch

Detroit, MI - Renaissance Center

400 Renaissance Center, Detroit, United States, 48243

The GM Renaissance Center is conveniently located in downtown Detroit and easily accessed by car via Interstates 75 or 94, with secure underground parking available on site. Travelers flying into Detroit Metropolitan Airport (DTW) can expect a 25–30 minute trip by taxi or rideshare via I‑94. Public transit is efficient: the Detroit People Mover stops directly at the Renaissance Center station, and DDOT routes 3 and 9 serve nearby Jefferson Avenue. Pedestrian skywalks provide safe indoor access from downtown hotels, parking garages, and the riverwalk.

Ann Arbor, MI – Regus - South State Commons I

2723 S State St, Ann Arbor, United States, 48104

Regus South State Commons I is conveniently located off I‑94 via Exit 177 (State Street), with easy access to downtown Ann Arbor and surrounding suburbs. The building offers free on-site surface parking for guests. From Detroit Metropolitan Airport (DTW), the venue can be reached in approximately 20–25 minutes by taxi or rideshare via I‑94 West. Local public transit service (TheRide) operates Route 24 along South State Street, with a stop within a short 2-minute walk of the building.
NobleProg Training Place, City Grand Rapids, MI - Regus – Calder Plaza

Grand Rapids, MI - Regus – Calder Plaza

250 Monroe Ave NW, Grand Rapids, United States, 49503

The venue sits centrally at 250 Monroe Avenue NW in downtown Grand Rapids, easily accessed by car via US‑131 or I‑196—with connections via Monroe or Ottawa exits—and offers shared underground and surface parking. From Gerald R. Ford International Airport, take I‑96 East then I‑196 West into the city; the drive is about 20 minutes. Public transit through Rapid bus routes stops near Monroe or Ottawa Avenue, just a short walk from the Regus entrance; the downtown area is pedestrian-friendly.
NobleProg Training Place, City Lansing, MI - Regus - One Michigan Avenue

Lansing, MI - Regus - One Michigan Avenue

120 North Washington Square, Lansing, United States, 48933

The venue is located in the heart of Lansing’s central business district at 120 North Washington Square, easily accessible by car via I‑496 or US‑127 with convenient street parking and a nearby parking ramp. From Capital Region International Airport (LAN), the location is approximately a 12‑minute drive west via I‑96 and US‑127, with taxis and rideshares readily available. Public transit users can take CATA bus routes that stop just a block away on Washington or Grand Avenue, offering seamless access to the venue.

Explore Our Courses

Jenkins Advanced

 14 Hours

This instructor-led, live training in Michigan (online or onsite) covers advanced Jenkins configurations, security, and scaling techniques, and is aimed at DevOps engineers and software architects who wish to gain expertise in customizing Jenkins for complex software projects.

By the end of this training, participants will be able to:

  • Optimize Jenkins for enterprise-level software projects.
  • Implement advanced security measures.
  • Build complex and scalable pipelines.
  • Troubleshoot and maintain Jenkins installations effectively.
Read more...

Jenkins Fundamentals

 14 Hours

This instructor-led, live training in Michigan (online or onsite) covers the fundamental concepts and usage of Jenkins, and is aimed at software developers and DevOps engineers who wish to set up Jenkins, create and configure jobs, and automate key aspects of the software development process.

By the end of this training, participants will be able to:

  • Understand the principles of continuous integration and continuous delivery (CI/CD).
  • Install and configure Jenkins for software automation.
  • Create and manage Jenkins jobs for building and testing applications.
  • Set up and customize automated pipelines for software deployment.
Read more...

Test Automation with Selenium and Jenkins

 21 Hours

This course provides training for handling testing projects using Selenium test suite and continuous testing with Jenkins.

Intended Audience:

  • Software test engineers
  • Software developers involved in agile development
  • Release managers
  • QA engineers

At the end of Selenium training the delegates will be able to:

  • Use Selenium test suite effectively in real projects
  • Use Selenium for cross browser testing
  • Distribute the tests using Selenium Grid
  • Run regression Selenium tests in Jenkins
  • Prepare test reports and periodict reports using Jenkins
Read more...

Continuous Integration for JavaScript

 14 Hours

Continuous Integration (CI) is a development practice wherein developers merge changes in their code as often as possible in order to detect and locate errors quickly.

In this instructor-led, live training, participants will learn the basics of Continuous Integration for JavaScript as they step through setting up a Continuous Integration process for a JavaScript project.

By the end of this training, participants will be able to:

  • Understand the fundamentals of Continuous Integration
  • Build their own Continuous Integration system for their JavaScript projects

Audience

  • Developers
  • IT Professionals
  • DevOps Engineers
  • Business Managers

Format of the course

  • Part lecture, part discussion, exercises and heavy hands-on practice
Read more...

DevOps Practical Implementation and Tools

 21 Hours

This course focuses on practical implementation and tooling. It assumes good knowledge on theoretical principals (see DEVOPS course) as it focuses on newest tools and methods of implementing DevOps principles.

Read more...

Docker and Jenkins for DevOps

 14 Hours

This instructor-led, live training in Michigan (online or onsite) is aimed at DevOp engineers who wish to optimize and simplify the CI/CD process with Docker and Jenkins.

By the end of this training, participants will be able to:

  • Automate code delivery and pipeline deployment with Jenkins.
  • Build an application using Docker and Docker File.
  • Configure authentication options to strengthen security.
Read more...

Jenkins: Continuous Integration for Agile Development

 14 Hours

This instructor-led, live training in Michigan covers the concepts, tools and techniques needed to carry out continuous integration of your software projects in an Agile environment. Participants carry out a series of hands-on exercises throughout the course to apply their knowledge in real situations. Interaction among instructor and participants is encouraged. Real-world cases are discussed and specific issues and questions are addressed and resolved in class.

Read more...

Jenkins 2: Building CI/CD Pipelines

 14 Hours

This instructor-led, live training in Michigan (online or onsite) is aimed at engineers who wish to use Jenkins 2 to build pipelines that automate the process of moving an application from development to production.

By the end of this training, participants will be able to:

  • Install and configure Jenkins 2.
  • Adopt a script approach to automating every step of the software deployment process.
  • Automatically generate application builds when software is checked into a version control system.
  • Automatically kick off the compiling, testing, and packaging of a software application.
  • Quickly respond to notifications and reports when things go wrong.
  • Install additional plugins to extend Jenkins.
Read more...

Jenkins for .Net Continuous Integration (CI)

 14 Hours

When developers finish writing a piece of code, they often integrate their code into an application, copy the application into a folder, run the application installer, then initialize the application to check whether it runs as expected. This manual approach does not scale very well, is tedious, very error-prone and offers no mechanism for tracking changes during the process.

A better approach would be to automate the process using Continuous Integration. Continuous Integration refers to the processes, tools and infrastructure needed to automate the building, deployment and testing of software applications.

In this instructor-led, live training (onsite or remote), participants will learn how to transform a traditional, manual (or semi-manual) approach to software deployment into an agile, Continuous Integration (CI) one using Jenkins. Participants carry out a series of hands-on, live-lab exercises throughout the course, applying their new knowledge to various software development and deployment problems every step of the way. Interaction among the instructor and participants is encouraged. Real-world cases are discussed and specific issues and questions are addressed and resolved throughout the training. The training is especially focused on .Net application development.
 
By the end of this training, participants will be able to:

  • Install and configure Jenkins for .Net application development
  • Use Jenkins to automate the process of checking in and merging .Net source code into a code repository
  • Use Jenkins to automate the process of downloading, compiling and deploying an application to a release server
  • Integrate Jenkins with other software development tools such as issue trackers and

Audience

  • .Net developers
  • Build engineers
  • QA engineers
  • Project managers
  • Release managers
  • DevOps engineers

Format of the Course

  • Part lecture, part discussion, exercises and heavy hands-on practice

Note

  • To request a customized training for this course, please contact us to arrange.
Read more...

Building CI/CD Pipelines with Jenkins X

 21 Hours

This instructor-led, live training in Michigan (online or onsite) is aimed at engineers who wish to use Jenkins X to create automated, cloud-ready CI/CD pipelines on Kubernetes.

By the end of this training, participants will be able to:

  • Install and configure Jenkins X.
  • Code resilient CI/CD pipelines using a versatile DSL (Domain Specific Language).
  • Create CI/CD pipelines that leverage popular technologies such as GitHub, Kubernetes and Docker containers.
  • Combine Jenkins X with other popular tools such as Helm, Prow, and Skaffold.
  • Deploy applications to any environment, whether in the cloud or on-premises.
Read more...

Selenium with Jenkins and Docker

 14 Hours

This instructor-led, live training in (online or onsite) is aimed at DevOps engineers who wish to use Selenium to execute Selenium tests inside of Docker containers.

By the end of this training, participants will be able to:

  • Create test automation infrastructure for on-demand testing.
  • Develop a test automation framework using Java.
  • Build a CI/CD pipeline from scratch with Jenkins and Docker.
Read more...

Advance Test Automation in Java using Selenium with continuous integration and version control

 35 Hours

By the end of this training, participants will be able to:

  • Install and configure Maven.
  • Automate Testing using Selenium
  • Managing GIT
  • Integrating continous integration

Format of the Course

  • Interactive lecture and discussion.
  • Lots of exercises and practice.
  • Hands-on implementation in a live-lab environment.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
Read more...

Last Updated:

Testimonials (4)

Trainer has in depth experince and well narreated in deed. The depth of the knowledge and the passion for teaching is highly appriciated.

Anup Kumar - SMR Automotive Mirrors Stuttgart

Course - Jenkins 2: Building CI/CD Pipelines

The instructor. I understood what he was teaching which was surprising given my lack of knowledge. If he could teach me, he can teach anyone!!!!

April - OIT

Course - Test Automation with Selenium and Jenkins

Being introduced to some technologies I wish I knew earlier.

Michel - Vanier College

Course - DevOps Practical Implementation and Tools

I like all the possibilities that I discovered in the course about DevOps options that I can apply in order to have a better CD/CI workflow!

Juan Manuel - si

Course - Jenkins: Continuous Integration for Agile Development

Upcoming Courses

Selenium with Jenkins and Docker

2026-04-22 9:30 am
14 hours
Ann Arbor, MI – Regus - South State Commons I
$ 2220 (Online)
$ 3420 (Classroom)

Jenkins for .Net Continuous Integration (CI)

2026-05-06 9:30 am
14 hours
Ann Arbor, MI – Regus - South State Commons I
$ 1737 (Online)
$ 2937 (Classroom)

Test Automation with Selenium and Jenkins

2026-05-20 9:30 am
21 hours
Ann Arbor, MI – Regus - South State Commons I
$ 3330 (Online)
$ 5130 (Classroom)

Jenkins: Continuous Integration for Agile Development

2026-06-03 9:30 am
14 hours
Ann Arbor, MI – Regus - South State Commons I
$ 2220 (Online)
$ 3420 (Classroom)

Advance Test Automation in Java using Selenium with continuous integration and version control

2026-06-17 9:30 am
35 hours
Ann Arbor, MI – Regus - South State Commons I
$ 5550 (Online)
$ 8550 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

Jenkins Consulting
Online Jenkins training in Michigan, Jenkins training courses in Michigan, Weekend Jenkins courses in Michigan, Evening Jenkins training in Michigan, Jenkins instructor-led in Michigan, Jenkins coaching in Michigan, Jenkins one on one training in Michigan, Jenkins trainer in Michigan, Evening Jenkins courses in Michigan, Jenkins classes in Michigan, Jenkins instructor-led in Michigan, Weekend Jenkins training in Michigan, Jenkins boot camp in Michigan, Jenkins instructor in Michigan, Online Jenkins training in Michigan, Jenkins on-site in Michigan, Jenkins private courses in Michigan