Get in Touch

Totowa, NJ – Regus at Riverview Drive

999 Riverview Dr 2nd Floor, Totowa, United States, 07512

The venue is located in a landscaped corporate park off Route 46 and I‑80, offering easy access by car and free on-site parking. From Newark Liberty International Airport (EWR), about 15 miles away, a taxi or rideshare ride via I‑78 West typically takes 20–25 minutes. Visitors arriving by car from New York City or northern NJ can use I‑80, I‑287, or the Garden State Parkway. Public transit is also convenient: NJ Transit and local bus routes stop near the Riverview campus, and the Little Falls train station is just a short rideshare or walk away.

Princeton, NJ – Regus at Overlook Business Center

100 Overlook Center, 2nd Floor, Princeton, United States, 08540

The venue is located just off Route 1 within a landscaped office park at Overlook Center, easily reached by car via I‑95 or US‑1, with complimentary on-site parking. From Newark Liberty or Philadelphia International Airports, travel takes approximately 1–1.5 hours via I‑95 and US‑1. Attendees can also arrive by train: New Jersey Transit and Amtrak serve Princeton Junction Station (about 3 miles away), with local shuttle or taxi options for the final leg. Public transit users can take local DART or Coach USA buses that stop at Route 1 and University Drive, followed by a brief walk to building entrance.

Newark, NJ – At One Gateway Center

One Gateway Center, Suite 2600, Newark, United States, 07102

The venue is situated within the iconic One Gateway Center, directly connected to Newark Penn Station via covered walkway, and is conveniently accessible by car via I‑95, I‑78, I‑280, and the New Jersey Turnpike, with public garages nearby. Visitors arriving from Newark Liberty International Airport (EWR), roughly 3 miles away, can expect a 10-minute taxi or rideshare ride via I‑78 West. Those coming by train benefit from Penn Station, which also connects by PATH service to Manhattan in under 20 minutes. Local NJ Transit and Newark Light Rail bus routes also serve the Gateway complex, offering seamless public transit access.

Jersey City, NJ – Regus at Hudson Street

101 Hudson Street, 21st Floor, Jersey City, united states, 07302

The venue is located on the 21st floor of the 42‑story Merrill Lynch Building at 101 Hudson Street in Paulus Hook, reachable by car via I‑78, I‑95, or the New Jersey Turnpike, with public and building parking available. From Newark Liberty Airport (EWR), about 8 miles away, taxis or rideshares take 15–20 minutes via I‑78 East. Attendees arriving by train can use Newark Penn or PATH to Exchange Place or Newport stations, then walk 5–7 minutes to the building. Multiple NJ Transit and local bus routes also serve the area.

Trenton, NJ – Base Camp Trenton

247 E Front St, Trenton, United States, 08611

The venue is located in downtown Trenton on Front Street, just off Route 29 and a short drive from I‑295, offering easy car access with street and municipal lot parking nearby. Visitors coming from Newark Liberty International Airport (EWR), about 45 miles northeast, can expect a taxi or rideshare ride of roughly 50–60 minutes via I‑95 South. Those arriving from Philadelphia International Airport (PHL), approximately 25 miles southwest, typically take about 35–45 minutes via I‑95 North. Public transit is also convenient—NJ Transit trains arrive at Trenton Transit Center just a few blocks away and local DART First State buses stop near Front Street, placing the venue within short walking distance for attendees without a car.

Explore Our Courses

Jenkins Advanced

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) covers advanced Jenkins configurations, security, and scaling techniques, and is aimed at DevOps engineers and software architects who wish to gain expertise in customizing Jenkins for complex software projects.

By the end of this training, participants will be able to:

  • Optimize Jenkins for enterprise-level software projects.
  • Implement advanced security measures.
  • Build complex and scalable pipelines.
  • Troubleshoot and maintain Jenkins installations effectively.
Read more...

Jenkins Fundamentals

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) covers the fundamental concepts and usage of Jenkins, and is aimed at software developers and DevOps engineers who wish to set up Jenkins, create and configure jobs, and automate key aspects of the software development process.

By the end of this training, participants will be able to:

  • Understand the principles of continuous integration and continuous delivery (CI/CD).
  • Install and configure Jenkins for software automation.
  • Create and manage Jenkins jobs for building and testing applications.
  • Set up and customize automated pipelines for software deployment.
Read more...

Test Automation with Selenium and Jenkins

 21 Hours

This course provides training for handling testing projects using Selenium test suite and continuous testing with Jenkins.

Intended Audience:

  • Software test engineers
  • Software developers involved in agile development
  • Release managers
  • QA engineers

At the end of Selenium training the delegates will be able to:

  • Use Selenium test suite effectively in real projects
  • Use Selenium for cross browser testing
  • Distribute the tests using Selenium Grid
  • Run regression Selenium tests in Jenkins
  • Prepare test reports and periodict reports using Jenkins
Read more...

Continuous Integration for JavaScript

 14 Hours

Continuous Integration (CI) is a development practice wherein developers merge changes in their code as often as possible in order to detect and locate errors quickly.

In this instructor-led, live training, participants will learn the basics of Continuous Integration for JavaScript as they step through setting up a Continuous Integration process for a JavaScript project.

By the end of this training, participants will be able to:

  • Understand the fundamentals of Continuous Integration
  • Build their own Continuous Integration system for their JavaScript projects

Audience

  • Developers
  • IT Professionals
  • DevOps Engineers
  • Business Managers

Format of the course

  • Part lecture, part discussion, exercises and heavy hands-on practice
Read more...

DevOps Practical Implementation and Tools

 21 Hours

This course focuses on practical implementation and tooling. It assumes good knowledge on theoretical principals (see DEVOPS course) as it focuses on newest tools and methods of implementing DevOps principles.

Read more...

Docker and Jenkins for DevOps

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at DevOp engineers who wish to optimize and simplify the CI/CD process with Docker and Jenkins.

By the end of this training, participants will be able to:

  • Automate code delivery and pipeline deployment with Jenkins.
  • Build an application using Docker and Docker File.
  • Configure authentication options to strengthen security.
Read more...

Jenkins: Continuous Integration for Agile Development

 14 Hours

This instructor-led, live training in New Jersey covers the concepts, tools and techniques needed to carry out continuous integration of your software projects in an Agile environment. Participants carry out a series of hands-on exercises throughout the course to apply their knowledge in real situations. Interaction among instructor and participants is encouraged. Real-world cases are discussed and specific issues and questions are addressed and resolved in class.

Read more...

Jenkins 2: Building CI/CD Pipelines

 14 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at engineers who wish to use Jenkins 2 to build pipelines that automate the process of moving an application from development to production.

By the end of this training, participants will be able to:

  • Install and configure Jenkins 2.
  • Adopt a script approach to automating every step of the software deployment process.
  • Automatically generate application builds when software is checked into a version control system.
  • Automatically kick off the compiling, testing, and packaging of a software application.
  • Quickly respond to notifications and reports when things go wrong.
  • Install additional plugins to extend Jenkins.
Read more...

Jenkins for .Net Continuous Integration (CI)

 14 Hours

When developers finish writing a piece of code, they often integrate their code into an application, copy the application into a folder, run the application installer, then initialize the application to check whether it runs as expected. This manual approach does not scale very well, is tedious, very error-prone and offers no mechanism for tracking changes during the process.

A better approach would be to automate the process using Continuous Integration. Continuous Integration refers to the processes, tools and infrastructure needed to automate the building, deployment and testing of software applications.

In this instructor-led, live training (onsite or remote), participants will learn how to transform a traditional, manual (or semi-manual) approach to software deployment into an agile, Continuous Integration (CI) one using Jenkins. Participants carry out a series of hands-on, live-lab exercises throughout the course, applying their new knowledge to various software development and deployment problems every step of the way. Interaction among the instructor and participants is encouraged. Real-world cases are discussed and specific issues and questions are addressed and resolved throughout the training. The training is especially focused on .Net application development.
 
By the end of this training, participants will be able to:

  • Install and configure Jenkins for .Net application development
  • Use Jenkins to automate the process of checking in and merging .Net source code into a code repository
  • Use Jenkins to automate the process of downloading, compiling and deploying an application to a release server
  • Integrate Jenkins with other software development tools such as issue trackers and

Audience

  • .Net developers
  • Build engineers
  • QA engineers
  • Project managers
  • Release managers
  • DevOps engineers

Format of the Course

  • Part lecture, part discussion, exercises and heavy hands-on practice

Note

  • To request a customized training for this course, please contact us to arrange.
Read more...

Building CI/CD Pipelines with Jenkins X

 21 Hours

This instructor-led, live training in New Jersey (online or onsite) is aimed at engineers who wish to use Jenkins X to create automated, cloud-ready CI/CD pipelines on Kubernetes.

By the end of this training, participants will be able to:

  • Install and configure Jenkins X.
  • Code resilient CI/CD pipelines using a versatile DSL (Domain Specific Language).
  • Create CI/CD pipelines that leverage popular technologies such as GitHub, Kubernetes and Docker containers.
  • Combine Jenkins X with other popular tools such as Helm, Prow, and Skaffold.
  • Deploy applications to any environment, whether in the cloud or on-premises.
Read more...

Selenium with Jenkins and Docker

 14 Hours

This instructor-led, live training in (online or onsite) is aimed at DevOps engineers who wish to use Selenium to execute Selenium tests inside of Docker containers.

By the end of this training, participants will be able to:

  • Create test automation infrastructure for on-demand testing.
  • Develop a test automation framework using Java.
  • Build a CI/CD pipeline from scratch with Jenkins and Docker.
Read more...

Advance Test Automation in Java using Selenium with continuous integration and version control

 35 Hours

By the end of this training, participants will be able to:

  • Install and configure Maven.
  • Automate Testing using Selenium
  • Managing GIT
  • Integrating continous integration

Format of the Course

  • Interactive lecture and discussion.
  • Lots of exercises and practice.
  • Hands-on implementation in a live-lab environment.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
Read more...

Last Updated:

Testimonials (4)

Trainer has in depth experince and well narreated in deed. The depth of the knowledge and the passion for teaching is highly appriciated.

Anup Kumar - SMR Automotive Mirrors Stuttgart

Course - Jenkins 2: Building CI/CD Pipelines

The instructor. I understood what he was teaching which was surprising given my lack of knowledge. If he could teach me, he can teach anyone!!!!

April - OIT

Course - Test Automation with Selenium and Jenkins

Being introduced to some technologies I wish I knew earlier.

Michel - Vanier College

Course - DevOps Practical Implementation and Tools

I like all the possibilities that I discovered in the course about DevOps options that I can apply in order to have a better CD/CI workflow!

Juan Manuel - si

Course - Jenkins: Continuous Integration for Agile Development

Upcoming Courses

Selenium with Jenkins and Docker

2026-04-22 9:30 am
14 hours
Totowa, NJ – Regus at Riverview Drive
$ 2220 (Online)
$ 3420 (Classroom)

Jenkins for .Net Continuous Integration (CI)

2026-05-06 9:30 am
14 hours
Princeton, NJ – Regus at Overlook Business Center
$ 1737 (Online)
$ 2937 (Classroom)

Test Automation with Selenium and Jenkins

2026-05-20 9:30 am
21 hours
Totowa, NJ – Regus at Riverview Drive
$ 3330 (Online)
$ 5130 (Classroom)

Jenkins: Continuous Integration for Agile Development

2026-06-03 9:30 am
14 hours
Princeton, NJ – Regus at Overlook Business Center
$ 2220 (Online)
$ 3420 (Classroom)

Advance Test Automation in Java using Selenium with continuous integration and version control

2026-06-17 9:30 am
35 hours
Totowa, NJ – Regus at Riverview Drive
$ 5550 (Online)
$ 8550 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

Jenkins Consulting
Online Jenkins training in New Jersey, Jenkins training courses in New Jersey, Weekend Jenkins courses in New Jersey, Evening Jenkins training in New Jersey, Jenkins instructor-led in New Jersey, Jenkins instructor in New Jersey, Jenkins trainer in New Jersey, Jenkins instructor-led in New Jersey, Jenkins private courses in New Jersey, Weekend Jenkins training in New Jersey, Evening Jenkins courses in New Jersey, Jenkins one on one training in New Jersey, Jenkins classes in New Jersey, Jenkins on-site in New Jersey, Jenkins coaching in New Jersey, Jenkins boot camp in New Jersey, Online Jenkins training in New Jersey