Whether online or onsite, instructor-led live 3D Modeling training courses demonstrate the fundamentals and advanced concepts of 3D Modeling through interactive hands-on practice.
3D Modeling training is available as "online live training" or "onsite live training". Online live training (aka "remote live training") is carried out by way of an interactive, remote desktop. Onsite live 3D Modeling trainings in Pennsylvania can be carried out locally on customer premises or in NobleProg corporate training centers.
NobleProg -- Your Local Training Provider
Allentown, PA – Grand Plaza
835 Hamilton St, Allentown, United States, 18101
The venue is located in the iconic Grand Plaza building in downtown Allentown, accessible by car via I‑78 or US‑22, with nearby public parking lots and street spaces. From Lehigh Valley International Airport (ABE), about 6 miles north, a taxi or rideshare takes approximately 10–15 minutes via Airport Road and Hamilton Street. Public transit users can take LANta bus routes that stop directly on Hamilton Street, with the center just steps from the bus stop, offering convenient access without a vehicle.
Harrisburg, PA – Regus at Campus Square
1426 North 3rd Street, 4th Floor, Harrisburg, United States, 17102
The venue is situated in the modern LEED Gold–certified Campus Square building at 1426 N 3rd Street in Midtown Harrisburg, easily reachable by car via I‑83 or Route 230, with ample on-site parking and nearby municipal garages. From Harrisburg International Airport (MDT), about 12 miles southwest, a taxi or rideshare typically takes 15–20 minutes via PA‑283 West and I‑83 North. Public transit is convenient: several Capital Area Transit buses stop within a block, and the building is within walking distance of major routes and complemented by Midtown’s walkable environment and local amenities.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at intermediate-level architects who wish to use ArchiCAD for architectural design, building information modeling (BIM), and advanced construction documentation.
By the end of this training, participants will be able to:
Learn to create, modify, and manage both 2D and 3D views within projects.
Understand and manipulate objects, components, and libraries in ArchiCAD.
Create detailed building sections, elevations, and component details.
Analyze and optimize building energy performance using ArchiCAD’s energy analysis tools.
Develop photorealistic renderings and animations for presentations.
Automate building processes and run performance simulations.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at intermediate-level to advanced-level SolidWorks users who wish to deepen their modeling skills, master advanced features, and improve design efficiency and accuracy.
By the end of this training, participants will be able to:
Create complex parts, assemblies, and configurations efficiently.
Use advanced modeling tools such as sweeps, lofts, and surfaces.
Apply design tables, equations, and parametric controls.
Perform simulations and motion studies to validate designs.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at beginner-level electrical engineers and designers who wish to use AutoCAD to create professional electrical drawings and documentation.
By the end of this training, participants will be able to:
Understand the basics of electrical design and drafting using AutoCAD Electrical.
Learn to create and manage electrical schematics, panel layouts, and wiring diagrams.
Utilize AutoCAD Electrical's advanced tools and features to enhance productivity.
Apply best practices for electrical design and documentation.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at beginner-level users who wish to explore the core functionalities of Solidworks PDM and its applicability to their organization's design file management requirements.
By the end of this training, participants will be able to:
Understand the key features and benefits of Solidworks PDM.
Navigate the Solidworks PDM interface and workflows.
Perform basic end-user tasks such as file check-in/check-out, versioning, and searching.
Explore administrative functionalities, including vault configuration, user permissions, and workflow customization.
Assess the potential implementation of Solidworks PDM across multiple company sites.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at intermediate-level mechanical engineers and CAD designers who wish to use SolidWorks to design and implement industrial automation systems.
By the end of this training, participants will be able to:
Install and configure SolidWorks for automation design.
Design, simulate, and analyze industrial automation components and systems.
Export designs for real-world implementation in industrial settings.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at advanced-level AutoCAD Plant 3D users who wish to use AutoCAD Plant 3D for complex plant design projects effectively.
By the end of this training, participants will be able to:
Use AutoCAD Plant 3D for complex and detailed plant design projects.
Understand the advanced features of AutoCAD Plant 3D, including custom component creation, advanced data management, and complex routing.
Manage large-scale projects and collaborate effectively with teams using different software tools.
Customize the software and automate repetitive tasks to meet specific project needs.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at artists, game developers, or complete beginners who wish to use Blender to create 3D models for interactive applications, video games, animated films, etc.
By the end of this training, participants will be able to:
Learn how to create animations and visual effects with Blender.
Add curves, surfaces, metaballs, and hair particles to simulate realistic 3D motions.
Introduction to non-destructive modelling and animation.
Export 3D models and assets to a game engine, 3D printer, or other software.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at beginner-level to intermediate-level professionals in plant design and engineering who wish to gain and enhance their skills in using AutoCAD Plant 3D.
By the end of this training, participants will be able to:
Set up a development environment that includes AutoCAD Plant 3D.
Create detailed 3D plant models and layouts.
Generate accurate isometric and orthographic drawings.
Effectively document and collaborate on plant designs.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at beginner-level engineers who wish to use Autodesk InfoDrainage for storm and foul network design, both as a standalone tool and integrated with Civil 3D.
By the end of this training, participants will be able to:
Create, edit, and analyze both storm and foul drainage networks in InfoDrainage.
Conduct 1D and 2D simulations to assess drainage system performance.
Understand how to integrate data between Civil 3D and InfoDrainage efficiently.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at artists, game developers, or complete beginners who wish to use Blender to create 3D models for interactive applications, video games, animated films, etc.
By the end of this training, participants will be able to:
Understand the principles and core concepts of 3D modeling.
Explore a variety of modes and tools for modeling and editing 3D meshes.
Use the tools for UV mapping/unwrapping, sculpting, and painting 3D models renderring.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at intermediate-level to advanced-level mechatronics, mechanical, electrical, and electronics engineers who wish to further enhance their SolidWorks knowledge by mastering advanced part modeling, as well as other advanced features and shaping capabilities of SolidWorks.
By the end of this training, participants will be able to:
Use multi-body solids, sweeping and lofting features, and more advanced SolidWorks features.
Utilize the assembly modeling capabilities of SolidWorks.
Master the advanced modeling features of SolidWorks.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at beginner-level graphic designers and artists who wish to learn the basics of 3ds Max and how to create 3D models, animations, and renderings for various purposes.
By the end of this training, participants will be able to:
Set up a development environment that includes 3ds Max software, a computer that meets the system requirements, and Visual Studio Code.
Create a basic 3ds Max project and explore the user interface and navigation tools.
Use 3ds Max tools and modifiers to create and edit 3D objects, such as primitives, shapes, meshes, and splines.
Use 3ds Max materials and maps to apply colors, textures, and effects to 3D objects.
Use 3ds Max lights and cameras to set up the scene and adjust the lighting and perspective.
Use 3ds Max animation tools and controllers to animate 3D objects and create keyframes, curves, and trajectories.
Use 3ds Max rendering tools and settings to render the scene and export the final image or video.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at beginner-level to intermediate-level web designers who wish to learn how to use CATIA V5 for collaborative product creation and product data management.
By the end of this training, participants will be able to:
Understand the CATIA V5 interface and navigation.
Create 2D sketches and transform them into 3D models.
Develop assemblies to combine multiple components.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at intermediate-level geospatial professionals who wish to use Rhinoceros 6 and Agisoft Metashape to create, refine, and integrate detailed 3D models.
By the end of this training, participants will be able to:
Understand the fundamentals of 3D design and photogrammetry.
Efficiently navigate and use Rhinoceros 6 for creating and refining 3D models.
Apply NURBS modeling techniques in Rhinoceros 6 and perform photogrammetric processing using Agisoft Metashape.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at intermediate-level to advanced-level mechatronics, mechanical, electrical, and electronics engineers who wish to further enhance their SolidWorks knowledge by mastering advanced part modeling, as well as other advanced features and shaping capabilities of SolidWorks.
By the end of this training, participants will be able to:
Use multi-body solids, sweeping and lofting features, and more advanced SolidWorks features.
Utilize the assembly modeling capabilities of SolidWorks.
Master the advanced modeling features of SolidWorks.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at advanced-level web designers who wish to learn how to handle heavy drawings using AutoCAD.
By the end of this training, participants will be able to:
Understand the challenges associated with large drawings and implement strategies for efficient file organization.
Apply techniques to improve drawing performance and handle regenerations efficiently.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at artists, game developers, or complete beginners who wish to use Blender to create 3D models for interactive applications, video games, animated films, etc.
By the end of this training, participants will be able to:
Understand the principles and core concepts of 3D modeling.
Explore a variety of modes and tools for modeling and editing 3D meshes.
Learn how to create animations and visual effects with Blender.
Add curves, surfaces, metaballs, and hair particles to simulate realistic 3D motions.
Use the tools for UV mapping/unwrapping, sculpting, and painting 3D models.
Export 3D models and assets to a game engine, 3D printer, or other software.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at beginner-level to intermediate-level web designers who wish to learn how to use CATIA V5 for collaborative product creation and product data management.
By the end of this training, participants will be able to:
Understand the CATIA V5 interface and navigation.
Create 2D sketches and transform them into 3D models.
Develop assemblies to combine multiple components.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at anyone who wishes to learn how to use Digital Twin in monitoring and analyzing products and processes before building and deploying the actual product.
By the end of this training, participants will be able to:
Learn and understand the fundamental concepts of Digital Twin.
Understand the Digital Twin types and life cycle.
Use Digital Twin to effectively manage research data and design models.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at beginner-level developers and architects who wish to learn the basics of Navisworks and how to use it for BIM (Building Information Modeling) project delivery.
By the end of this training, participants will be able to:
Set up and use Navisworks for 3D model review and coordination.
Create and visualize a composite BIM model from different design disciplines.
Communicate and annotate issues and feedback within the model.
Perform clash detection and resolution between 3D files.
Simulate and control construction schedules and costs.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at designers, mechanical engineers, and anyone who wishes to learn how to create 3D models that can be constructed or 3D printed.
By the end of this training, participants will be able to:
Create printable 3D models.
Use geometric transformations to build complex 3D shapes.
Model in a non-interactive manner using minimal lines of code.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at mechatronics, mechanical, electrical, and electronics engineers who wish to use SolidWorks to sketch and produce a detailed drawing of their ideas and concepts.
By the end of this training, participants will be able to:
Understand the fundamentals of SolidWorks.
Design and create parts, assemblies, and 3D models with SolidWorks.
The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the Magicdraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at web designers who wish to create 3D and/or 2D models with Autodesk Revit.
By the end of this training, participants will be able to:
Add datum elements, such as levels and grids for advanced modeling.
The BEM (Boundary Element Method) is a numerical computational method and design technique for solving a range of engineering and physical problems. BEM is a promising alternative to FEM (Finite Element Method) as it bypasses the need for a 3D finite element mesh of an entire space.
In this instructor-led, live training, participants will learn the theory and benefits of using BEM as they apply BEM techniques to solving engineering design problems related to complex three dimensional structures. The mathematical concepts behind BEM are explained and applied as coding exercises throughout the training.
Audience
Developers
Engineers
Format of the course
Part lecture, part discussion, exercises and heavy hands-on practice
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at web designers who wish to use CATIA to develop and design 2D and 3D models.
By the end of this training, participants will be able to:
Support multiple stages of product development including design, manufacturing, and engineering.
Facilitate the design of various systems, such as fluid systems.
Apply CATIA to a wide variety of industries and industrial equipment.
Cortona3D is publication software for generating web-based 3D/2D documentation from existing CAD and BOM data.
In this instructor-led, live training, participants will learn how to set up and operate the various Cortona3D components as they create enhanced technical documentation for a sample project.
By the end of this training, participants will be able to use Cortona3D to publish various types of 3D-animated materials, including catalogs, documentation and training resources.
Audience
Engineers
Designers
Technical publication professionals
Format of the course
Part lecture, part discussion, exercises and heavy hands-on practice
The "Inventor - Stopień I" course aims to familiarize participants with the basics of the CAD Autodesk Inventor program. The program covers fundamental principles such as an overview of templates, principles of creating projects and knowledge of the program interface. Participants will gain knowledge about sketching tools, solid and surface modeling, creating assemblies, designing sheet metal structures, welded structures and technical documentation. This course is suitable for people who want to gain basic skills in using Autodesk Inventor for computer-aided design.
The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training covers the fundamentals of creating templates and generating reports within the MagicDraw/Cameo tool suite, and teaches how macros and scripts work inside MagicDraw and what they can be applied to.
The course is designed to teach the fundamentals of the Systems Modeling Language (SysML), its application through the MagicDraw/Cameo software, basic Model-Based Systems Engineering (MBSE) simulation techniques, and best practices in MBSE. This training teaches the core concepts and features of validation rules, validation suites, and model metrics and is designed to introduce the core concepts and features of developing and utilizing model queries in MagicDraw/Cameo.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at investigators who wish to use Mesa to create Agent Based Models in a Python environment.
By the end of this training, participants will be able to:
Install and configure the development environment needed to start modeling in Python.
Quickly create an agent-based model using Mesa's built-in core components.
Expand the complexity of the model.
Visualize agent activity in real-time inside a browser.
Analyze the results of the model interactively using Python data analysis tools.
Integrate the model with other Python systems such as machine learning applications.
This instructor-led, live training (online or onsite) is aimed at mechanical engineers and designers wishing to learn how to use the Modelica modeling language to model industrial systems.
Modelica is a modeling language for complex systems involving mechanical, electrical, electronic, hydraulic, thermal, control, electric power or process-oriented subcomponents.
By the end of this training, participants will be able to:
Choose from different open source platforms for developing Modelica models
Understand different real-world usages and implementation details of Modelica
Model real-world industrial systems involving electric and mechanical components
Implement Modelica libraries and create their own classes
Integrate their algorithms into existing systems and applications
Format of the Course
Interactive lecture and discussion
Lots of exercises and practice
Hands-on implementation in a live-lab environment
Course Customization Options
This training is based on various open source platforms for running Modelica (JModelica.org, Openmodelica, etc.).
To request a specific implementation for this course, please contact us to arrange.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at investigators who wish to use NetLogo to create Agent Based Models (ABM).
By the end of this training, participants will be able to:
Install NetLogo.
Develop an agent-based model.
Visualize agent activity.
Analyze the results of the model.
Test and document the agent-based simulation model.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at design engineers or industrial designers who wish to use NVIDIA Omniverse to build realistic simulations while working collaboratively on a single platform.
By the end of this training, participants will be able to:
Install and enable Omniverse components and applications.
Develop and render 3D simulations that mimic physically accurate environment and workflows.
Simplify the process of building and rendering complex workflows by connecting different design tools and applications in one platform.
A course focused on leveraging Cameo Simulation Toolkit to simulate behaviors, execute trade studies, and automate architectures with additional modules on requirements verification, the Action Language Helper, and graphical interfaces for simulations.
PCB (Printed Circuit Board) Circuit Design refers to the process of designing, etching, and printing circuits on a signal boards layout. EAGLE is a freely available desktop application for designing PCBs.
In this instructor-led, live training, participants will learn how to use the Eagle software to create PCB circuit boards. The course starts by examining a set of existing schematics, then drawing out an original circuit in Eagle. The training steps through process for designing the circuit board and discusses the process for manufacturing the boards (the course does not include the physical manufacturing of the boards).
By the end of this training, participants will be able to:
Create a Printed Circuit Board (PCB) from any schematic
Create schematics and design circuit boards using Eagle
Export the industry-standard files for constructing the circuit board
Audience
Engineers
Technicians
Format of the Course
Part lecture, part discussion, exercises and heavy hands-on practice
Notes
To request a customized training for this course, please contact us to arrange.
PCB (Printed Circuit Board) Circuit Design refers to the process of designing, etching, and printing circuits on a signal boards layout. Altium Designer is a freely available desktop application for designing PCBs.
In this instructor-led, live training, participants will learn how to use the Altium software to create PCB circuit boards. The course starts by examining a set of existing schematics, then drawing out an original circuit in Altium. The training steps through process for designing and manufacturing the circuit board.
By the end of this training, participants will be able to:
Create a Printed Circuit Board (PCB) from any schematic
Create schematics and design circuit boards using Altium
Print and etch a physical circuit board
Export the industry-standard files for sending to a large-scale manufacturer
Audience
Engineers
Technicians
Format of the Course
Part lecture, part discussion, exercises and heavy hands-on practice
Notes
To request a customized training for this course, please contact us to arrange.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at design engineers, architects, and developers who wish to use Pixar USD to create, build, and share common 3D scenes or assets while working simultaneously from different graphics tools.
By the end of this training, participants will be able to:
Set up the necessary development environment to start building 3D graphics and workflows.
Understand the basic USD composition and apply modifications to enhance 3D assets and scenes.
Share, combine, and transform multiple assets using the supported USD plugins for 3rd party applications (Maya, Katana, and Houdini).
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at design engineers, architects, or video game developers who wish to use RealityCapture to create 3D models for gaming, architecture, or other visualization projects.
By the end of this training, participants will be able to:
Set up the necessary development environment to start creating 3D models with RealityCapture.
Learn how to implement the photogrammetry workflow for producing and reconstructing realistic 3D models.
Export and upload 3D models to VR and AR content platforms, such as Unreal Engine, Sketchfab, and Cesium ion.
The Repast Suite is a family of advanced, free, and open source agent-based modeling and simulation libraries that have collectively been under continuous development for over 10 years. This four day course in Pennsylvania (online or onsite) explains in detail how to create simulation for agent-based systems using the Repast environment.
Course Objectives
Introduce participants to principles and concepts of agent-based modeling and simulation.
Develop participants’ capacity to read and understand agent modeling programming code.
Equip participants with knowledge, so they understand the importance of accurate and precise modeling.
Increase the participants’ understanding of systems of their own using the Agent-based simulation.
Develop a better capacity to use and code agent-based systems using repast, reLogo.
This instructor-led, live training in Pennsylvania (online or onsite) is aimed at architects who wish to create 3D models for architectural designs using SketchUp.
By the end of this training, participants will be able to:
Use SketchUp to create 3D models of buildings, landscapes, scenes, furniture, etc.
Apply different types of materials to the interior and exterior of a 3D structure.
Geolocate a modeled structure for mapping realistic elements, such as shadows.
Read more...
Last Updated:
Testimonials (7)
the initial theoretical part to put into context
Cristina A - Nielseniq
Course - Agent Based Modeling (ABM) with Mesa and Python
Machine Translated
Anil was very understanding and explained the course content in detail. With more time the outcome of the course would be better instead of rushing the content, but over all Anil is very familiar with the software CATIA and is a great trainer,
Jaydon - GRI Towers South Africa
Course - Learning CATIA
Learning about the software
Peter - Coleg Cambria
Course - Blender: 3D Modeling Fundamentals
Learning all the things that I wasn't understand it.
Anonymous
Course - SolidWorks
LIPS knowledge
Ion Jeman - Orange Moldova
Course - AutoCAD: Beginner to Advanced
The trainer well prepared the course material beforehand and the session was very flexible and arranged to meet the trainee's interests. The management staffs were also around during the course to help us. The project was well managed in a friendly atmosphere throughout.
Kikuko Shoyama
Course - Repast - Agent Based Modeling and Simulation (ABMS)
Basic steps that are very useful when in schematic/ PCB workspace and presented Advanced features, actual demos to follow
hedda david - Allegro Microsystems Philippines, Inc.
Online 3D Modeling training in Pennsylvania, 3D Modeling training courses in Pennsylvania, Weekend 3D Modeling courses in Pennsylvania, Evening 3D Modeling training in Pennsylvania, 3D Modeling instructor-led in Pennsylvania, 3D Modeling private courses in Pennsylvania, 3D Modeling instructor-led in Pennsylvania, 3D Modeling boot camp in Pennsylvania, 3D Modeling classes in Pennsylvania, 3D Modeling one on one training in Pennsylvania, 3D Modeling trainer in Pennsylvania, Weekend 3D Modeling training in Pennsylvania, Online 3D Modeling training in Pennsylvania, 3D Modeling coaching in Pennsylvania, Evening 3D Modeling courses in Pennsylvania, 3D Modeling instructor in Pennsylvania, 3D Modeling on-site in Pennsylvania
.jpg)
