Charlotte, NC – City Center

525 North Tryon Street, Suite 1600, Charlotte, United States, 28202

The venue is located in Uptown Charlotte’s City Center district at 525 North Tryon Street, easily reachable by car via I‑77, I‑85, or I‑277, with access to adjacent parking garages connected via pedestrian skywalks. From Charlotte Douglas International Airport (CLT), roughly 10 miles southwest, a taxi or rideshare takes approximately 15–20 minutes via I‑485, I‑77 North, then Trade Street. Public transit is convenient: the Lynx Blue Line light rail stops at 9th Street station two blocks away, and multiple CATS bus routes travel along Tryon and Trade streets—making it accessible for participants without cars.

Cary, NC – Regus at Regency Parkway

2500 Regency Pkwy, Cary, United States, 27518

The venue sits within the Regency Park campus at 2500 Regency Parkway, conveniently accessible by car via US 1/US 64 and I‑40, with free on-site parking and adjacent lots. From Raleigh–Durham International Airport (RDU), about 15 miles northwest, taxis or rideshares typically take 20–25 minutes via US 64 East. Public transit users can use GoCary and GoRaleigh bus routes; Cary Station is about 0.8 miles away, offering access via regional transport followed by a short walk or quick rideshare to the building.

Chapel Hill, NC – Regus at Environ Way

1340 Environ Way, Chapel Hill, United States, 27517

The venue is situated on Environ Way in Chapel Hill’s sustainably designed office park, easily reached by car via US‑15‑501 and NC‑54, with ample on-site and municipal lot parking. From Raleigh–Durham International Airport (RDU), approximately 12 miles northwest, taxis or rideshares typically take 20–25 minutes via I‑40 East and US‑15‑501 South. Public transit is convenient: Chapel Hill Transit buses stop nearby on East Franklin Street, and UNC’s campus is a short walk away—making the location ideal for attendees without cars.

Durham, NC – Regus at Shannon Road

3511 Shannon Road, 3rd Floor, Durham, United States, 27707

The venue is situated in a suburban business park with easy car access via I‑40 and NC‑147, and offers ample on-site parking. From Raleigh-Durham International Airport (RDU), about 7 miles northwest, taxis or rideshares typically take 15–20 minutes via I‑40 East. Public transit options include GoDurham and GoTriangle bus routes that serve nearby Shannon and Cornwallis Roads, with a short walk to the building entrance.

Raleigh, NC – Regus at Raleigh City Plaza

421 Fayetteville Street, Plaza Downtown, Suite 1100, Raleigh, United States, 27601

The venue is located in downtown Raleigh within the One City Plaza tower on Fayetteville Street, easily accessible by car via I‑40 or I‑440, with several public parking garages within a block. From Raleigh‑Durham International Airport (RDU), approximately 17 miles west, taxis or rideshares typically take 20–25 minutes via I‑40 East. For attendees using public transit, GoRaleigh bus routes stop on Fayetteville and Salisbury Streets directly in front of One City Plaza, offering convenient walkable access to the building.

Subcategories (7)

Explore Our Courses

Electronic Control Unit (ECU) - Practical Vector

28 Hours

Electronic Control Unit (ECU) - Theoretical Vector

21 Hours

Deploying AI on Microcontrollers with TinyML

21 Hours

Advanced Arduino Programming

14 Hours

Advanced Embedded Systems Development

35 Hours

Arduino Programming for Beginners

21 Hours

ARM Technology

14 Hours

Building A Robot from the Ground Up

28 Hours

Buildroot: a Firmware Generator for Embedded Systems

7 Hours

C Programming for Embedded Systems

21 Hours

Circuits and Electronics Fundamentals

14 Hours

C++ for Embedded Systems

21 Hours

Digital Signal Processing (DSP) Fundamentals

21 Hours

Embedded C Application Design Principles for Automotive Professionals

14 Hours

Embedded C Application Design Principles

14 Hours

Embedded Linux Systems Architecture

35 Hours

Embedded Linux Kernel and Driver Development

14 Hours

Introduction to Embedded Linux (Hands-on training)

14 Hours

Introduction to Embedded Computers

14 Hours

Using C++ in Embedded Systems - Applying C++11/C++14

21 Hours

Embedded Linux: Building a System from the Ground Up

14 Hours

FPGA Design for Embedded Systems

7 Hours

FreeRTOS: Programming for Real Time Operating Systems

14 Hours

Introduction to IoT Using Arduino

14 Hours

Embedded GNU/Linux Kernel Internals and Device Drivers

35 Hours

Learning Vivado

14 Hours

LEDE: Set Up a Linux Wireless Router

7 Hours

Model Based Development for Embedded Systems

21 Hours

Microcontroller Design

35 Hours

NetApp ONTAP

35 Hours

Object Oriented Programming with C++

7 Hours

PCB Circuit Design with Eagle

21 Hours

PCB Circuit Design with Altium

21 Hours

Raspberry Pi

7 Hours

Raspberry Pi for Beginners

14 Hours

Real Time Operating System

7 Hours

Tensorflow Lite for Microcontrollers

21 Hours

Yocto Project

28 Hours

Zig Programming

14 Hours

Last Updated:

Testimonials (14)

Upcoming Courses

Other regions in the US

Online Embedded Systems training in North Carolina, Embedded Systems training courses in North Carolina, Weekend Embedded Systems courses in North Carolina, Evening Embedded Systems training in North Carolina, Embedded Systems instructor-led in North Carolina, Embedded Systems on-site in North Carolina, Embedded Systems classes in North Carolina, Evening Embedded Systems courses in North Carolina, Embedded Systems boot camp in North Carolina, Embedded Systems coaching in North Carolina, Online Embedded Systems training in North Carolina, Embedded Systems private courses in North Carolina, Weekend Embedded Systems training in North Carolina, Embedded Systems instructor-led in North Carolina, Embedded Systems instructor in North Carolina, Embedded Systems one on one training in North Carolina, Embedded Systems trainer in North Carolina