Birmingham, AL – Regus at Shipt Tower (Downtown)

420 20th St S, Suite 2200, Birmingham, United States, 35203

The venue is located in downtown Birmingham within the prominent Shipt Tower at 420 North 20th Street, easily reached by car via I‑59, I‑20, or I‑65, with nearby public parking garages. From Birmingham–Shuttlesworth International Airport (BHM), a taxi or rideshare typically takes 10–15 minutes via I‑20 West and US‑31 North. Public transit users can take MAX bus routes stopping on 20th Street or near 4th Avenue North, placing the centre within a few minutes’ walk—offering good access for attendees without cars.

Birmingham, AL – Regus at Chase Corporate Center

1 Chase Corporate Drive, Suite 400, Birmingham, United States, 35244

The venue sits in the Chase Corporate Center just off Highway 31 near I‑459 and Highway 280, within a serene, landscaped corporate campus. Visitors arriving by car benefit from plentiful free parking on-site and adjoining garages. From Birmingham–Shuttlesworth International Airport (BHM), taxis or rideshares take around 15–20 minutes via I‑459 North and Highway 280. Public transit riders can use MAX bus routes stopping close to the corporate park, though most attendees prefer driving or rideshare. The tranquil campus setting offers easy access to nearby gyms, retail, and restaurants for break or post-session gatherings.
NobleProg Training Place, City Birmingham, AL - Regus at One Perimeter Park

Birmingham, AL - Regus at One Perimeter Park

1 Perimeter Park South, Birmingham, United States, 35243

The venue is located in the Perimeter Park business complex off I‑459 near Highway 280, offering easy access by car with ample on-site parking. Visitors arriving by air from Birmingham‑Shuttlesworth International Airport (BHM), about 15 miles away, can expect a traditional taxi or rideshare ride of approximately 20–25 minutes via I‑459 South and Highway 280. Public transit options include nearby Jefferson County Transit buses that run along Valleydale Road, with stops within a few blocks of Perimeter Park, making it reasonably accessible without a car.

Explore Our Courses

Lockout/Tagout (LOTO) System for Manufacturing

 7 Hours

Lockout/Tagout (LOTO) system is the set of procedures, hardware, and administrative controls used to isolate hazardous energy sources and prevent unexpected energization, startup, or release of stored energy during maintenance and servicing.

This instructor-led, live training (online or onsite) is aimed at beginner-level to intermediate-level maintenance technicians, operators, and safety supervisors who wish to implement, manage, and audit effective LOTO programs in manufacturing environments.

By the end of this training, participants will be able to:

  • Explain regulatory requirements and key standards governing LOTO in manufacturing environments.
  • Develop and apply site-specific LOTO procedures and permits.
  • Perform energy source identification and hazard assessments for common equipment types.
  • Execute safe lockout and tagout steps, including verification and restoration of energy.

Format of the Course

  • Interactive lecture and discussion.
  • Practical, instructor-led demonstrations of lockout/tagout procedures.
  • Hands-on labs using representative equipment mock-ups and simulations.

Course Customization Options

  • To request a customized version of this course (site-specific procedures, regulatory jurisdiction focus, or extended practical labs), please contact us to arrange.
Read more...

Combined Cycle Operational Simulator: Incident Detection and Response

 14 Hours

The Combined Cycle Operational Simulator is a training solution designed to replicate real-time scenarios within a combined cycle power plant, enabling operators to safely experience and respond to incidents, faults, and critical maneuvers in a controlled environment.

This instructor-led, live training (online or onsite) is aimed at intermediate-level control room operators who wish to improve their readiness and confidence in handling abnormal plant conditions and performing key operational actions using a simulator.

By the end of this training, participants will be able to:

  • Operate a combined cycle power plant simulator in normal and fault conditions.
  • Detect, analyze, and respond to operational incidents using appropriate procedures.
  • Execute startup, shutdown, and load adjustment maneuvers under supervision.
  • Apply safety protocols and minimize risks during simulated emergencies.

Format of the Course

  • Interactive lecture and discussion.
  • Hands-on simulator exercises.
  • Scenario-based fault detection and response simulations.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
Read more...

Notifier NFS2-3030

 35 Hours

This instructor-led, live training in Birmingham (online or onsite) is aimed at intermediate-level fire alarm technicians and safety personnel who wish to install, configure, and maintain the Notifier NFS2-3030 fire alarm system.

By the end of this training, participants will be able to:

  • Understand the architecture and capabilities of the NFS2-3030 panel.
  • Configure and program the system for different fire protection requirements.
  • Perform troubleshooting and maintenance procedures.
  • Integrate the system with other fire and safety components.
Read more...

AI in Electrical Engineering: Digital Substations and Power Lines

 21 Hours

This instructor-led, live training in Birmingham (online or onsite) is aimed at intermediate-level professionals who wish to explore the design and implementation of digital substations and power lines using current trends and AI tools.

By the end of this training, participants will be able to:

  • Understand the transition from conventional to digital substations.
  • Identify key trends in substation design and smart grids.
  • Apply AI techniques to the design and optimization of electrical lines and substations.
  • Leverage tools like Python, MATLAB, and PowerFactory for AI-driven electrical engineering solutions.
  • Implement AI algorithms for predictive maintenance and fault detection in substations.
Read more...

NOTIFIER NFS-32 Control Panel Configuration and Maintenance

 14 Hours

This instructor-led, live training in Birmingham (online or onsite) is aimed at intermediate-level maintenance personnel who wish to gain expertise in configuring, maintaining, and troubleshooting the NOTIFIER NFS-32 fire alarm control panel to ensure optimal system performance and rapid fault resolution.

By the end of this training, participants will be able to:

  • Understand the configuration and operation of the NOTIFIER NFS-32 control panel.
  • Perform routine maintenance to ensure the reliability of the system.
  • Analyze and troubleshoot common faults effectively.
  • Implement corrective measures to resolve issues promptly.
Read more...

Basic Principles of Electricity and Electrical Power System Operations

 21 Hours

This instructor-led, live training in Birmingham (online or onsite) is aimed at beginner-level electrical professionals who wish to gain foundational knowledge on electricity and electrical power systems.

By the end of this training, participants will be able to:

  • Understanding basic principles of electricity.
  • Comprehend the structure and operation of electrical power systems.
  • Apply regulatory standards for energy storage and cogeneration.
Read more...

Last Updated:

Upcoming Courses

Basic Principles of Electricity and Electrical Power System Operations

2025-11-24 9:30 am
21 hours
Birmingham, AL - Regus at One Perimeter Park
$ 4054 (Online)
$ 4054 (Classroom)

NOTIFIER NFS-32 Control Panel Configuration and Maintenance

2025-12-08 9:30 am
14 hours
Birmingham, AL – Regus at Shipt Tower (Downtown)
$ 2703 (Online)
$ 2703 (Classroom)

NOTIFIER NFS-32 Control Panel Configuration and Maintenance

2025-12-22 9:30 am
14 hours
Birmingham, AL – Regus at Chase Corporate Center
$ 2703 (Online)
$ 2703 (Classroom)

Notifier NFS2-3030

2026-01-05 9:30 am
35 hours
Birmingham, AL - Regus at One Perimeter Park
$ 6757 (Online)
$ 6757 (Classroom)

Combined Cycle Operational Simulator: Incident Detection and Response

2026-01-19 9:30 am
14 hours
Birmingham, AL – Regus at Shipt Tower (Downtown)
$ 2703 (Online)
$ 2703 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

Electrical Engineering Consulting
Online Electrical Engineering training in Birmingham, Electrical Engineering training courses in Birmingham, Weekend Electrical Engineering courses in Birmingham, Evening Electrical Engineering training in Birmingham, Electrical Engineering instructor-led in Birmingham, Weekend Electrical Engineering training in Birmingham, Evening Electrical Engineering courses in Birmingham, Electrical Engineering instructor-led in Birmingham, Electrical Engineering instructor in Birmingham, Electrical Engineering coaching in Birmingham, Electrical Engineering trainer in Birmingham, Electrical Engineering classes in Birmingham, Electrical Engineering on-site in Birmingham, Online Electrical Engineering training in Birmingham, Electrical Engineering one on one training in Birmingham, Electrical Engineering boot camp in Birmingham, Electrical Engineering private courses in Birmingham