Louisville, KY – Regus at Ormsby III Forest Green

10200 Forest Green Boulevard, Louisville, United States, 40223

The venue is located in the Ormsby III office within Forest Green business park in south Louisville, easily accessible by car via I‑65 and Gene Snyder Freeway (I‑265), and offers abundant free on-site parking. From Louisville Muhammad Ali International Airport (SDF), approximately 12 miles northwest, a taxi or rideshare takes around 15–20 minutes via US‑150 East and I‑65 South. Public transit is available via TARC buses serving Forest Green Boulevard and Ormsby Parkway, with stops near the park entrance and a short walk to the building.

Lexington, KY – Regus at Blazer Parkway

3499 Blazer Parkway, Suite 330, Lexington, United States,  40509

The venue is located in the Blazer Parkway office park, easily accessible by car via I‑75 and Man o’ War Boulevard, with generous on-site parking available. From Blue Grass Airport (LEX), about 8 miles northeast, a taxi or rideshare typically takes 15 minutes via I‑75 South. Public transit users can take Lextran bus routes that serve Blazer Parkway, followed by a short walk through the office park to reach the Regus building.
NobleProg Training Place, City Louisville, KY – Regus at MET Building

Louisville, KY – Regus at MET Building

312 S 4th St Downtown, Suite 700, Louisville , United States, 40202

The venue is located in the heart of downtown Louisville within the historic MET Building on Fourth Street, easily reachable by car via I‑64, I‑65, or I‑71, with several public parking garages nearby. From Louisville Muhammad Ali International Airport (SDF), approximately 12 miles southwest, a taxi or rideshare takes around 15–20 minutes via I‑65 North and Brook Street. Public transit is available via TARC buses with stops along Fourth and Broadway, and the building is within a five-minute walk from major bus routes—ideal for attendees arriving without a car.

Explore Our Courses

Lockout/Tagout (LOTO) System for Manufacturing

 7 Hours

Lockout/Tagout (LOTO) system is the set of procedures, hardware, and administrative controls used to isolate hazardous energy sources and prevent unexpected energization, startup, or release of stored energy during maintenance and servicing.

This instructor-led, live training (online or onsite) is aimed at beginner-level to intermediate-level maintenance technicians, operators, and safety supervisors who wish to implement, manage, and audit effective LOTO programs in manufacturing environments.

By the end of this training, participants will be able to:

  • Explain regulatory requirements and key standards governing LOTO in manufacturing environments.
  • Develop and apply site-specific LOTO procedures and permits.
  • Perform energy source identification and hazard assessments for common equipment types.
  • Execute safe lockout and tagout steps, including verification and restoration of energy.

Format of the Course

  • Interactive lecture and discussion.
  • Practical, instructor-led demonstrations of lockout/tagout procedures.
  • Hands-on labs using representative equipment mock-ups and simulations.

Course Customization Options

  • To request a customized version of this course (site-specific procedures, regulatory jurisdiction focus, or extended practical labs), please contact us to arrange.
Read more...

Combined Cycle Operational Simulator: Incident Detection and Response

 14 Hours

The Combined Cycle Operational Simulator is a training solution designed to replicate real-time scenarios within a combined cycle power plant, enabling operators to safely experience and respond to incidents, faults, and critical maneuvers in a controlled environment.

This instructor-led, live training (online or onsite) is aimed at intermediate-level control room operators who wish to improve their readiness and confidence in handling abnormal plant conditions and performing key operational actions using a simulator.

By the end of this training, participants will be able to:

  • Operate a combined cycle power plant simulator in normal and fault conditions.
  • Detect, analyze, and respond to operational incidents using appropriate procedures.
  • Execute startup, shutdown, and load adjustment maneuvers under supervision.
  • Apply safety protocols and minimize risks during simulated emergencies.

Format of the Course

  • Interactive lecture and discussion.
  • Hands-on simulator exercises.
  • Scenario-based fault detection and response simulations.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
Read more...

Notifier NFS2-3030

 35 Hours

This instructor-led, live training in Kentucky (online or onsite) is aimed at intermediate-level fire alarm technicians and safety personnel who wish to install, configure, and maintain the Notifier NFS2-3030 fire alarm system.

By the end of this training, participants will be able to:

  • Understand the architecture and capabilities of the NFS2-3030 panel.
  • Configure and program the system for different fire protection requirements.
  • Perform troubleshooting and maintenance procedures.
  • Integrate the system with other fire and safety components.
Read more...

AI in Electrical Engineering: Digital Substations and Power Lines

 21 Hours

This instructor-led, live training in Kentucky (online or onsite) is aimed at intermediate-level professionals who wish to explore the design and implementation of digital substations and power lines using current trends and AI tools.

By the end of this training, participants will be able to:

  • Understand the transition from conventional to digital substations.
  • Identify key trends in substation design and smart grids.
  • Apply AI techniques to the design and optimization of electrical lines and substations.
  • Leverage tools like Python, MATLAB, and PowerFactory for AI-driven electrical engineering solutions.
  • Implement AI algorithms for predictive maintenance and fault detection in substations.
Read more...

NOTIFIER NFS-32 Control Panel Configuration and Maintenance

 14 Hours

This instructor-led, live training in Kentucky (online or onsite) is aimed at intermediate-level maintenance personnel who wish to gain expertise in configuring, maintaining, and troubleshooting the NOTIFIER NFS-32 fire alarm control panel to ensure optimal system performance and rapid fault resolution.

By the end of this training, participants will be able to:

  • Understand the configuration and operation of the NOTIFIER NFS-32 control panel.
  • Perform routine maintenance to ensure the reliability of the system.
  • Analyze and troubleshoot common faults effectively.
  • Implement corrective measures to resolve issues promptly.
Read more...

Basic Principles of Electricity and Electrical Power System Operations

 21 Hours

This instructor-led, live training in Kentucky (online or onsite) is aimed at beginner-level electrical professionals who wish to gain foundational knowledge on electricity and electrical power systems.

By the end of this training, participants will be able to:

  • Understanding basic principles of electricity.
  • Comprehend the structure and operation of electrical power systems.
  • Apply regulatory standards for energy storage and cogeneration.
Read more...

Last Updated:

Upcoming Courses

Basic Principles of Electricity and Electrical Power System Operations

2025-11-24 9:30 am
21 hours
Louisville, KY – Regus at Ormsby III Forest Green
$ 4054 (Online)
$ 4054 (Classroom)

NOTIFIER NFS-32 Control Panel Configuration and Maintenance

2025-12-08 9:30 am
14 hours
Louisville, KY – Regus at Ormsby III Forest Green
$ 2703 (Online)
$ 2703 (Classroom)

NOTIFIER NFS-32 Control Panel Configuration and Maintenance

2025-12-22 9:30 am
14 hours
Louisville, KY – Regus at Ormsby III Forest Green
$ 2703 (Online)
$ 2703 (Classroom)

Notifier NFS2-3030

2026-01-05 9:30 am
35 hours
Louisville, KY – Regus at Ormsby III Forest Green
$ 6757 (Online)
$ 6757 (Classroom)

Combined Cycle Operational Simulator: Incident Detection and Response

2026-01-19 9:30 am
14 hours
Louisville, KY – Regus at Ormsby III Forest Green
$ 2703 (Online)
$ 2703 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

Electrical Engineering Consulting
Online Electrical Engineering training in Kentucky, Electrical Engineering training courses in Kentucky, Weekend Electrical Engineering courses in Kentucky, Evening Electrical Engineering training in Kentucky, Electrical Engineering instructor-led in Kentucky, Electrical Engineering private courses in Kentucky, Electrical Engineering coaching in Kentucky, Electrical Engineering on-site in Kentucky, Online Electrical Engineering training in Kentucky, Electrical Engineering classes in Kentucky, Electrical Engineering instructor-led in Kentucky, Weekend Electrical Engineering training in Kentucky, Evening Electrical Engineering courses in Kentucky, Electrical Engineering instructor in Kentucky, Electrical Engineering boot camp in Kentucky, Electrical Engineering one on one training in Kentucky, Electrical Engineering trainer in Kentucky