Washington, DC - NW Conference Center

20 F St NW, Washington, United States, 20001

The venue is situated in the Capitol Hill area on F Street NW, with easy driving access via Massachusetts Avenue and I-395; paid parking is available on-site and in nearby garages. From Ronald Reagan Washington National Airport (DCA), about 5 miles away, a taxi or rideshare via I-395 North typically takes 15–20 minutes. From Dulles International Airport (IAD), approximately 26 miles away, the trip via the Dulles Access Road and I-66/I-395 takes roughly 35–45 minutes. Public transit is extremely convenient with Union Station Metro just one block away (Red Line) and multiple Metrobus routes along F, H, and G Streets NW.

Washington, DC - Paramount Building

1775 I St NW, Washington, United States, 20006

The venue is in the heart of downtown DC in the Paramount Building on I Street NW, accessible via I-395, US-1, or via Pennsylvania Avenue. Guests can park in nearby public garages including the Colonial Parking garage adjacent to the building. From Ronald Reagan Washington National Airport (DCA), it’s a short 10–15 minute drive via George Washington Memorial Parkway and Maine Avenue SW. Public transit is excellent: the building is a 3-minute walk from Farragut West Metro station (Blue, Orange, Silver lines), and several Metrobus lines travel along I, K, and 17th Streets, making it highly accessible without a car.
NobleProg Training Place, City Washington, DC - Regus One Franklin Square

Washington, DC - Regus One Franklin Square

1300 I Street NW, Suite 400E, Washington, United States, 20005

The venue sits prominently at One Franklin Square, in downtown Washington, DC, easily reachable by car via Massachusetts Avenue or I‑395 with paid garage parking available in the Franklin Square complex. From Ronald Reagan Washington National Airport (DCA), around 5 miles away, taxi or rideshare via I‑395 typically takes 15–20 minutes. From Dulles International Airport (IAD), approximately 26 miles away, the journey via the Dulles Access Road and I‑66/I‑395 takes about 35–45 minutes. For public transit, McPherson Square Metro Station (Orange, Silver, and Blue lines) is a short two-block walk, and multiple Metrobus routes run along I Street NW, providing convenient access to the venue.

Explore Our Courses

Lockout/Tagout (LOTO) System for Manufacturing

 7 Hours

Lockout/Tagout (LOTO) system is the set of procedures, hardware, and administrative controls used to isolate hazardous energy sources and prevent unexpected energization, startup, or release of stored energy during maintenance and servicing.

This instructor-led, live training (online or onsite) is aimed at beginner-level to intermediate-level maintenance technicians, operators, and safety supervisors who wish to implement, manage, and audit effective LOTO programs in manufacturing environments.

By the end of this training, participants will be able to:

  • Explain regulatory requirements and key standards governing LOTO in manufacturing environments.
  • Develop and apply site-specific LOTO procedures and permits.
  • Perform energy source identification and hazard assessments for common equipment types.
  • Execute safe lockout and tagout steps, including verification and restoration of energy.

Format of the Course

  • Interactive lecture and discussion.
  • Practical, instructor-led demonstrations of lockout/tagout procedures.
  • Hands-on labs using representative equipment mock-ups and simulations.

Course Customization Options

  • To request a customized version of this course (site-specific procedures, regulatory jurisdiction focus, or extended practical labs), please contact us to arrange.
Read more...

Combined Cycle Operational Simulator: Incident Detection and Response

 14 Hours

The Combined Cycle Operational Simulator is a training solution designed to replicate real-time scenarios within a combined cycle power plant, enabling operators to safely experience and respond to incidents, faults, and critical maneuvers in a controlled environment.

This instructor-led, live training (online or onsite) is aimed at intermediate-level control room operators who wish to improve their readiness and confidence in handling abnormal plant conditions and performing key operational actions using a simulator.

By the end of this training, participants will be able to:

  • Operate a combined cycle power plant simulator in normal and fault conditions.
  • Detect, analyze, and respond to operational incidents using appropriate procedures.
  • Execute startup, shutdown, and load adjustment maneuvers under supervision.
  • Apply safety protocols and minimize risks during simulated emergencies.

Format of the Course

  • Interactive lecture and discussion.
  • Hands-on simulator exercises.
  • Scenario-based fault detection and response simulations.

Course Customization Options

  • To request a customized training for this course, please contact us to arrange.
Read more...

Notifier NFS2-3030

 35 Hours

This instructor-led, live training in Washington D.C. (online or onsite) is aimed at intermediate-level fire alarm technicians and safety personnel who wish to install, configure, and maintain the Notifier NFS2-3030 fire alarm system.

By the end of this training, participants will be able to:

  • Understand the architecture and capabilities of the NFS2-3030 panel.
  • Configure and program the system for different fire protection requirements.
  • Perform troubleshooting and maintenance procedures.
  • Integrate the system with other fire and safety components.
Read more...

AI in Electrical Engineering: Digital Substations and Power Lines

 21 Hours

This instructor-led, live training in Washington D.C. (online or onsite) is aimed at intermediate-level professionals who wish to explore the design and implementation of digital substations and power lines using current trends and AI tools.

By the end of this training, participants will be able to:

  • Understand the transition from conventional to digital substations.
  • Identify key trends in substation design and smart grids.
  • Apply AI techniques to the design and optimization of electrical lines and substations.
  • Leverage tools like Python, MATLAB, and PowerFactory for AI-driven electrical engineering solutions.
  • Implement AI algorithms for predictive maintenance and fault detection in substations.
Read more...

NOTIFIER NFS-32 Control Panel Configuration and Maintenance

 14 Hours

This instructor-led, live training in Washington D.C. (online or onsite) is aimed at intermediate-level maintenance personnel who wish to gain expertise in configuring, maintaining, and troubleshooting the NOTIFIER NFS-32 fire alarm control panel to ensure optimal system performance and rapid fault resolution.

By the end of this training, participants will be able to:

  • Understand the configuration and operation of the NOTIFIER NFS-32 control panel.
  • Perform routine maintenance to ensure the reliability of the system.
  • Analyze and troubleshoot common faults effectively.
  • Implement corrective measures to resolve issues promptly.
Read more...

Basic Principles of Electricity and Electrical Power System Operations

 21 Hours

This instructor-led, live training in Washington D.C. (online or onsite) is aimed at beginner-level electrical professionals who wish to gain foundational knowledge on electricity and electrical power systems.

By the end of this training, participants will be able to:

  • Understanding basic principles of electricity.
  • Comprehend the structure and operation of electrical power systems.
  • Apply regulatory standards for energy storage and cogeneration.
Read more...

Last Updated:

Upcoming Courses

Basic Principles of Electricity and Electrical Power System Operations

2025-11-24 9:30 am
21 hours
Washington, DC - Regus One Franklin Square
$ 4054 (Online)
$ 4054 (Classroom)

NOTIFIER NFS-32 Control Panel Configuration and Maintenance

2025-12-08 9:30 am
14 hours
Washington, DC - NW Conference Center
$ 2703 (Online)
$ 2703 (Classroom)

NOTIFIER NFS-32 Control Panel Configuration and Maintenance

2025-12-22 9:30 am
14 hours
Washington, DC - Paramount Building
$ 2703 (Online)
$ 2903 (Classroom)

Notifier NFS2-3030

2026-01-05 9:30 am
35 hours
Washington, DC - Regus One Franklin Square
$ 6757 (Online)
$ 6757 (Classroom)

Combined Cycle Operational Simulator: Incident Detection and Response

2026-01-19 9:30 am
14 hours
Washington, DC - NW Conference Center
$ 2703 (Online)
$ 2703 (Classroom)

Other regions in the US

Other Countries

These courses are also available in other countries

Consulting

Electrical Engineering Consulting
Online Electrical Engineering training in Washington D.C., Electrical Engineering training courses in Washington D.C., Weekend Electrical Engineering courses in Washington D.C., Evening Electrical Engineering training in Washington D.C., Electrical Engineering instructor-led in Washington D.C., Electrical Engineering instructor-led in Washington D.C., Electrical Engineering coaching in Washington D.C., Electrical Engineering private courses in Washington D.C., Electrical Engineering classes in Washington D.C., Electrical Engineering on-site in Washington D.C., Evening Electrical Engineering courses in Washington D.C., Weekend Electrical Engineering training in Washington D.C., Electrical Engineering one on one training in Washington D.C., Electrical Engineering boot camp in Washington D.C., Online Electrical Engineering training in Washington D.C., Electrical Engineering trainer in Washington D.C., Electrical Engineering instructor in Washington D.C.